Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section

Base stations

The Integrator/DECT manager automatically recognizes the base stations within the network. Base stations need to be confirmed, activated and synchronized.

Base station administration

Use the following web configurator page to assign base stations to the DECT manager.

Settings Base stations Administration

There are two tables:

  1. Connected base stations lists all base stations which are already connected to the DECT manager.
  2. Pending base stations list all base stations which are not yet connected to a DECT manager.

 

Connected base stations
The page shows the connected base stations with the following information:
MAC address

Hardware address of the base station. With this address the device is uniquely
identified within the LAN.

Base station

Name of the base station. When added to the list the MAC address is used as name. The base station located at the same device as the DECT manager is
shown as Local.

The name can be edited

RPN

(Radio Fixed Part Number) This number separates the cells in which the base station could reside from each other (maximum 7 cells). It indicates for a
mobile device how many intercell hand overs the base station is able to manage.

DECT manager

Name of DECT manager the base station belongs to.
Currently always: local

FWFirmware version currently installed.
StatusSynchronization status of the base station:
 0OfflineNot available
 1DeactivatedAvailable but not activated
 2No SyncActivated but not synchronized
 3SyncActivated and synchronized
 4Sync OverloadSynchronized but DECT overload

 

Pending base stations

The Pending base stations list shows the automatically recognized DECT base stations in the network that have not yet been registered. To integrate them into your DECT multicell system, they need to be confirmed and activated.
The base stations are identified by their MAC address.

Assigning a base stations to your DECT manager

  • Click on in the row of the base station you want to add to your system . . . the data page for the base station is opened.

 

Info

The relation to a DECT manager cannot be edited and changed. To assign a base station to another DECT manager:

  • Delete it from the Connected base stations list.
  • Open a connection to the intended DECT manager.
  • Assign the base station from the base stations pending list to the DECT manager.