Versions Compared

Old Version 9

changes.mady.by.user van Eemeren Thijs

Saved on

compared with

New Version Current

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Section
Panel
bgColor#FDFEFE
titleBGColor#CACFD2
titleWeepee
Column
width25%

About Weepee telecom

Weepee werd opgericht in 2004 als één van de eerste Internet Telephony Service Providers in België. Weepee Telecom heeft uitzonderlijke ervaring in VoIP (Voice over IP) diensten en oplossingen als gelicencieerd B2B telecomoperator. Op basis van de ijzersterke reputatie van het Weepee Voice netwerk groeide Weepee Telecom uit tot significante speler voor bedrijfstelefonie met een brede portefeuille van innovatieve oplossingen.

 


 
Column
width75%

 Image RemovedImage AddedSee below for a list with supported features when using the Gigaset PRO IP Devices on the providers network.

Supported features

Feature                                       Maxwell 10Maxwell 3Maxwell basicN720 IP PRON510 IP PRO
Software release:  2.5.33.12.16.62.16.6108243
Basic CallYesYesYesYesYes
Calling line (CLIP)YesYesYesYesYes
Connected line (COLP)-1-1-1-1-1
Anonymous call-2-2-2-2-2
Do Not DisturbYesYesYes--
Message waitingYes YesYes YesYes
Call list/historyYesYesYesYesYes
Voice mail deposit/retrieval-1-1-1-1-1
Call waitingYesYesYesYesYes
Call Hold / ToggleYesYesYesYesYes
Call forward (CFU)-2-2-2-2-2
Call forward (CFNR)-2-2-2-2-2
Call forward (CFB)-2-2-2-2-2
Call Transfer attendedYesYesYesYesYes
Call Transfer early attendedYesYesYesYesYes
Call Transfer unattendedYesYesYes--
Call completed elsewhereYesYesYesYesYes
DTMF (RFC2833)YesYesYesYesYes
Conference 3ptyYesYesYes-Yes
BLF Busy / Idle indicationYesYesYes--
Call pick-up directYesYesYesYesYes
Call pick-up groupYesYesYesYesYes
Call pick-up BLFYesYesYes--
Auto provisioningYesYesYesYesYes
SIP Security
  
  





SIPS
 

YesYes--
SIP via TLS
 

YesYes--
SRTP
 

YesYes--
- Not supported by device
-1Not supported by the platform
-2Platform feature via FAC
3Via key extention module

Feature codes

 The following feature codes are supported by the platform.

code
feature
*31* numberAnonymous call to this number
*32* numberToggle Code: Enables/Disabled anonymous call for the next call On or Off (Announcement)
*32Toggle Code: Enables/Disable anonymous call for all calls On/Off (Announcement)
#32Toggle Code: Enables/Disable anonymous call for all calls On/Off (Announcement)
  


*35Toggle Code: Hotdesking to login/out on a device
*35*[int]Toggle Code: Hotdesking to login/out on a device
*35*[int]*[pin]Toggle Code: Hotdesking to login/out on a device
  


*100 / #100Toggle Code: Login/off in waiting queue, dependent on your previous state.
*101 / #101Login/off in all waiting queues.
*102 / #102Change Waiting queue status for all queues to "break"
*103 / #103Logoff from all waiting queues.
  


1233Voicemail box of user
 
 


*8Pick up first ringing
*8[extension number]Directed pickup of [Extension]
*8[group number]Group pickup
*96 / #96Voicemail box of user
  


*[xx]Toggle Code: To activate/deactivate the dial plan with number xx
  


1233 [vmbox-nr]Listen to voicemail messages of voicemail box number [vmbox-nr]
*96 [vmbox-nr]Listen to voicemail messages of voicemail box number [vmbox-nr]
#96 [vmbox-nr]Listen to voicemail messages of voicemail box number [vmbox-nr]

Auto provisioning

The Gigaset N510, N720 and Maxwell 10, Maxwell 3 and Maxwell basic are released behind the XRC Services platform including auto provisioning.

Go to Devices and click +Add and choose Gigaset pro:

Select the desired certified Gigaset pro product:

Enable auto-provisioning by clicking on No switch to change to Yes:

Enter the device MAC address and ID:

To finalize, click on next at the top.

When all steps are taken, like adding users and so on, the device will now automatically be added to the Gigaset pro redirect server.
Connect or restart the device and the device will auto-provisioned. 

Documentation and information:

Find here the support site