Page History

Align

align	right

Valid for:

N670

N870

...

Web-interface: Settings - Network - IP

Device nameNot via provisioningDevice name in the network: Label for the device. It is used to identify the device in network communication.

	Web-interface Language
WebUI.1.Language		cs-cz,de-de,el-gr,en-bt,es-es,fr-fr,it-it,nl-nl,pt-pt,ru-ru,sk-sk,tr-tr	Language: Current supported web-interface language is English, German, Russian, Czech, Spanish, French, Italian, Netherlands, Portuguese, Slovenian, Turkey, Greece
	Device name
Not via provisioning			Device name in the network: Label for the device. It is used to identify the device in network communication.
	Address Assignment
Not via provisioning			Network type: IPv4 / IPv6 (planned)
Supported see Wiki for details		dhcp - static	IP address type: Dynamic / Static
Supported see Wiki for details			IP address:
Supported see Wiki for details			Subnet mask:
Supported see Wiki for details			Standard gateway:
Supported see Wiki for details			Preferred DNS:
Supported see Wiki for details

Address AssignmentNot via provisioningNetwork type: IPv4 / IPv6 (planned)Not via provisioningIP address type: Dynamic / StaticNot via provisioningIP address:Not via provisioningSubnet mask:Not via provisioningStandard gateway:Not via provisioningPreferred DNS:Not via provisioning

Web-interface: Settings - Network - LAN
			Alternate DNS:
	VLAN

Not via provisioning

Supported see Wiki for details

vlan - eth0

VLAN tagging:

Not via provisioning

Supported see Wiki for details

0 - 4094

VLAN identifier:

Not via provisioning

Web-interface: Settings - Base stations - Administration
Supported see Wiki for details	0 - 7	VLAN priority:
ConfirmedBaseStations.<mac>.name		Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT network
ConfirmedBaseStations.<mac>.ucTxPower	1	0 = Normal power output (Default) 1= Reduce TX power by 8dB for external antenna operation
ConfirmedBaseStations.<mac>.bActivateCell	1	0 = Base station deactivated 1 = Activated base station (Default)
Web-interface: Settings - Base stations - Synchronization
ConfirmedBaseStations.<mac>.ucCluster	1 - 10	Select the cluster to which the base should be assigned to from the option menu.
ConfirmedBaseStations.<mac>.ucSyncLevel

1

0 -

10

Web-interface: Settings - Provider or PBX profiles
15	Select the synchronization level for the base station.
ConfirmedBaseStations.<mac>.bSyncLanMaster		0 - 1	0 = Off (Default) 1 = LAN Master
	VoIP Provider
SipProvider.<0-

9>

19>.Name		Connection name or number: Name for the provider or PBX profile. This name is shown in the Provider/PBX list
	Phone system
SipProvider.<0-

9>

Automatic (0)

19>.PhoneSystem

System:

0 = Automatic
1 = Standard
6 = Broadsoft

Openscape

Nfon

10 = Swyx
11 = 3CX

System: Select the type of PBX you use for VoIP provisioning from the option menu.

General data of your service provider

SipProvider.<0-

9>

19>.Domain			Domain: Domain part of the user address (SIP URI)
SipProvider.<0-

9>

19>.ProxyServerAddress		IP address/ DNS name	Proxy server address: The SIP proxy is your VoIP provider's gateway server and the first SIP server, where the device should send SIP requests and expects to receive requests
SipProvider.<0-

9>

19>.ProxyServerPort		1 - 65535	Proxy server port (Default 5060): Enter the port number of the first SIP server, where the device should send SIP requests and expects to receive requests.
SipProvider.<0-

9>

19>.RegServerAddress		IP address/ DNS name	Registration server: The registration server assigns the public IP address/port number that was used by the phone on registration to your SIP address (username@domain)
SipProvider.<0-

9>

19>.RegServerPort		1 - 65535	Registration server port (Default 5060): Enter the communication port used on the registrar.
SipProvider.<0-

9>

19>.RegServerRefreshTimer		1 - 5 digits	Registration refresh time (Default 180): Enter the time intervals (in seconds) at which the phone should repeat the registration with the VoIP server (SIP proxy)
SipProvider.<0-

9>

19>.TransportProtocol		1 = UDP 2 = TCP 3 = TLS	Transport protocol:
SipProvider.<0-

9>

19>.UseSIPS		0 = SIPS disabled (Default) 1 = SIPS enabled	Use SIP Security (SIPS):
SipProvider.<0-

9>

19>.SRTP_Enabled		0 = SRTP disabled (Default) 1 = SRTP enabled	Secure Real Time Protocol: Security (RTP) is activated for voice connections.
SipProvider.<0-

9>

19>.AcceptNonSRTPCalls		0 = Do not accept non-SRTP calls 1 = Accepts non-SRTP calls	Accept non-SRTP calls: Insecure calls are accepted even when SRTP is activated.
SipProvider.<0-19>.WithDeregOnHsNotReachable		0 = No 1 = Yes	Deregister detached HS
	Redundancy
SipProvider.<0-

9>

19>.DnsQuery		0 = A 1 = SRV + A 2 = NAPTR (NAPTR + SRV + A)	Redundancy - DNS query: VoIP providers provide SIP server redundancy for load balancing and service reliability. SIP servers can be identified by DNS using different queries:.
	Failover Server
SipProvider.<0-

9>

19>.FailoverServerEnabled		0 = Off 1 = On	Failover Server:
SipProvider.<0-

9>

19>.FailoverServerAddress		IP address/ DNS name	Registration server: Enter the IP address or the (fully qualified) DNS name of the failover registration server.
SipProvider.<0-

9>

19>.FailoverServerPort		1- 65535	Registration port (Default 5060): The communication port used on the failover registrar.
	Network data of your service provider
SipProvider.<0-

9>

19>.OutboundProxyMode		0 = Always 2 = Never	Outbound proxy mode:
SipProvider.<0-

9>

19>.OutboundProxyAddress		IP address/ DNS name	Outbound server address:
SipProvider.<0-

9>

19>.OutboundProxyPort		1 - 65535	Outbound proxy port (Default 5060)
SipProvider.<0-

9>

19>.MWISubscription		0 = Do not send SIP Subscribe for MWI 1 = Send SIP Subscribe for MWI	SIP SUBSCRIBE for Net-AM MWI: When activated a subscription is established for the purpose of receiving notifications about new messages on the network mailbox
	DTMF over VoIP Connections
SipProvider.<0-

9>

19>.DTMFTransmission

1 = Audio
2 = RFC 2833
3 = Audio + RFC 2833
4 = SIP INFO
5 = Audio + SIP INFO
6 = RFC 2833 + SIP INFO
7 = Audio + RFC 2833 + SIP INFO
129 = Automatic DTMF Negotiation

Send settings of DTMF transmission

Settings for CodecsSipProvider

	Connection Ringtone
SipRingtones.<0-

9>

19>.

ActiveCodecs18,9,8,0

Active codecs:

0 = g711u
8 = g711a
9 = g722
18 = g729

SipProvider.<0-9>.RTPPtime20, 30RTP Packetisation Time (ptime): Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet.SipProvider.<0-9>.HoldType0 = Inactive
1 = Sendonly (Default)

Signalling options for 'Hold' in Session Description Protocol (SDP): Call hold means that a user request to put an active call on hold. The holding part sends a re‑INVITE request to the held client with an SDP offer (Session Description Protocol). This SDP offer contains the attribute line a=inactive or a=sendonly.

SipProvider.<0-9>.CT_HoldTT_Attended0 - 10 = Attended Transfer
1 = Unattended TransferSipProvider.<0-9>.CT_HoldTT_Unattended0 - 1Settings for Codecs > Hold towards Transfer-Target > Unattended TransferDisplay of Caller InformationSipProvider.<0-9>.CLIPSource0 = FROM
1 = PPI+FROM
2 = PAI+PPI+FROM (Default)

Calling Party (User Part): From the option menu select which information is allowed to be transferred to the receiving part within the SIP header. Which information is actually transferred is determined by the provider.

Service CodesSipProvider.<0-9>.ServiceCode_CC_OnCall Completion on (CCBS, CCNR): SipProvider.<0-9>.ServiceCode_CC_OffCall Completion off (CCBS, CCNR): CSTASipProvider.<0-9>.CSTA_IsActive

Active:

Yes
No

SipProvider.<0-9>.CSTA_IsExternal

External:

Yes
No

SipProvider.<0-9>.CSTA_AddressAddress:SipProvider.<0-9>.CSTA_PortPort:SipProvider.<0-9>.CSTA_UseSips

Use SIP Security (SIPS):

Yes
No

SipProvider.<0-9>.CSTA_RegServerRefreshTimerRegistration refresh time:SipProvider.<0-9>.CSTA_TransportProtocol

Transport protocol:

UDP
TCP
TLS

SipProvider.<0-9>.CSTA_DnsQuery

DNS query:

A
SRV + A

SipProvider.<0-9>.AllowRouteHeadersSipProvider.<0-9>.DnDServiceCodeOffSipProvider.<0-9>.DnDServiceCodeOnSipProvider.<0-9>.DnDTypeSipProvider.<0-9>.RequestCheckOptSipProvider.<0-9>.STUNAddressSipProvider.<0-9>.STUNEnabledSipProvider.<0-9>.STUNPortSipProvider.<0-9>.STUNRefreshTimerWeb-interface: Settings - Mobile devices
Global SettingsDmGlobal.0.HSIdleDisplay0 = Username
1 = Display name

Displayed name in idle display:

Web-interface: Settings - Mobile devices - AdministrationMobile devicehs.<ipui>.Ipui

IPUI: (International Portable User Identity) Unique identifier of a handset within the DECT network. If you edit an existing handset registration entry, the IPUI is shown and cannot be changed.

hs.<ipui>.RegStatusToReg = "To Register", add new Handset
ToDeReg = "To DeRegister", delete existing HS
NotReg = "Not Registered", default value

RegStatus: DECT registration status of the handset entry.

hs.<ipui>.DECT_AC

min. 1, max. 4 digits

Authentication Code (PIN): This PIN must be used on the handset to register with the DECT network.

Personal provider dataSipAccount.<ipui>.ActiveSipAccount.<ipui>.AuthNameSIP Authentication nameSipAccount.<ipui>.AuthPasswordSIP Authentication passwordSipAccount.<ipui>.UserNameSIP UsernameSipAccount.<ipui>.DisplayNameSIP Display nameSipAccount.<ipui>.ProviderIdVoIP providerSipAccount.<ipui>.AuthenticateAutoAnswerCallSipAccount.<ipui>.CLIRSipAccount.<ipui>.CallDivert_ActiveSipAccount.<ipui>.CallDivert_DelaySipAccount.<ipui>.CallDivert_ModeSipAccount.<ipui>.CallDivert_TargetSipAccount.<ipui>.CallWaitingSipAccount.<ipui>.DnDActiveOnline directorieshs.<ipui>.DirectAccessDirDirectory for direct accesshs.<ipui>.IntKeyDirCorporate directory for INT keyhs.<ipui>.AutoLookupDirAutomatic look-upLDAP authenticationhs.<ipui>.LDAPIdSelected LDAP bookhs.<ipui>.LDAPShowProvidersShow other LDAP servershs.<ipui>.LDAPAuthTypeLDAP authorization typehs.<ipui>.LDAPUseSIPCredentialsLDAP Use personal provider data (SIP)hs.<ipui>.LDAPUsernameLDAP Usernamehs.<ipui>.LDAPPasswordLDAP PasswordNetwork mailbox configurationSipAccount.<ipui>.VoiceMailMailboxVoicemail box number / nameSipAccount.<ipui>.VoiceMailActive

Activate Voicemail box

0 = Disabled
1 = Enabled

Group pick-upSipAccount.<ipui>.OpenScapeGroupPickupAddressCall number or SIP name (URI)SipAccount.<ipui>.OpenScapeGroupPickupActiveActivate group pick-upCall managerhs.<ipui>.CallManagerCallsViaAccept calls directly via Call ManagerMissed calls and alarms

hs.<ipui>.SaveMissedCalls

hs.<ipui>.SaveAcceptedCalls

Missed/accepted calls count

hs.<ipui>.ShowMissedCalls

Flashing LED (MWI) for missed calls

hs.<ipui>.ShowMissedAlarms

Flashing LED (MWI) for missed alarms

hs.<ipui>.ShowMissedNetAM

Flashing LED (MWI) for network mailboxCSTASipAccount.<ipui>.CSTA_UsernameUsernameSipAccount.<ipui>.CSTA_AuthNameAuthentication nameSipAccount.<ipui>.CSTA_AuthPasswordAuthentication passwordWeb-interface: Settings - Mobile devices - Registration CenterWeb-interface: Settings - Telephony - VoIPDmGlobal.0.Port165535SIP port (Default 5060)SecureSecure SIP port (Default 5061)DmGlobal.0.Timers_T1SIP timer T1 (Default 500)DmGlobal.0.Timers_SessionSIP session timer (Default 1800)DmGlobal.0.Timers_FailedRegistrationFailed registration retry timer (Default 300)DmGlobal.0.Timers_SubscriptionSubscription timer (Default 1800)DmGlobal.0.PRACK010 = PRACK disabled
1 = PRACK enabledSIP Security Password

DmGlobal.0.QoS_SIP_DSCP

SIP ToS / DiffServ (Default 34)

DmGlobal.0.QoS_RTP_DSCP

RTP ToS / DiffServ (Default 46)Parameter nameValue:minValue:maxValue:AllowedWeb-interface: Settings - Telephony - AudioDmGlobal.0.WidebandEnabled010 = Wideband with codec G.722 disabled
1 = Wideband with codec G.722 disabledParameter nameValue:minValue:maxValue:AllowedWeb-interface: Settings - Telephony - Call settingsCall Transfer

Telephony.0.CT_ViaRKey

0 = No
1 = Yes

Call transfer via R key: Activated: Users can connect two external callers with each other by pressing the R key. The connections with both parties are terminated.

Telephony.0.CT_ByOnHook

0 = No
1 = Yes

Transfer call by on-hook: Activated: The two participants are connected with one another when the user presses the end call key. The intermediary's connections with the participants are terminated.

Telephony.0.CT_AutoDetermineAddress

0: off
1: on

Determine transfer target address: Select how the transfer target address (Refer-To URI) is to be derived: From transfer target's AOR (Address of Record). From transfer target's transport address (Contact URI)

Access Code

Telephony.0.AccessCode

max. 3 digits (0 - 9, *, R, #, P)Access Code:

Telephony.0.AccessCodeFor

0x0003 = From incoming calls list
0x0150 = From network directory
0x0153 = From incoming calls list+From network directory
0x7557 = Always

Is added to numbers: Select when the phone numbers should be automatically prefixed with the digits, e.g. when dialling from a call list or a directory.

Area Codes

AreaCodes.0.Country

Expand

title	Areacodes

Afghanistan
Albania
Algeria
American_samoa
Andorra
Angola
Anguilla
Antigua_and_barbuda
Argentina
Armenia
Aruba
Australia
Australian_external_territories
Austria
Azerbaijan
Bahamas
Bahrain
Bangladesh
Barbados
Belarus
Belgium
Belize
Benin
Bermuda
Bhutan
Bolivia_plurinational_state_of
Bonaire_sint_eustatius_and_saba
Bosnia_and_herzegovina
Botswana
Brazil
British_virgin_islands
Brunei_darussalam
Bulgaria
Burkina_faso
Burundi
Cambodia_telecom_cambodia
Cambodia_royal_telecom_international
Cameroon
Canada
Cape_verde
Cayman_islands
Central_african_rep
Chad
Chile_claro_chile
Chile_vtr_chile
Chile_convergia_chile
Chile_transam
Chile_enewcarriercom_chile
Chile_empresa_de_telecomunicaciones_netonone
Chile_heilsberg
Chile_concert_chile
Chile_globus
Chile_telefonica_del_sur
Chile_gtd_manquehue
Chile_entel_larga_distancia
Chile_gsp_chile
Chile_equant_chile
Chile_sur_telecomunicaciones
Chile_astro
Chile_stelchile_sa
Chile_micarrier_telecomunicaciones
Chile_fibersat
Chile_carrier_169
Chile_impsat_chile
Chile_global_crossing
Chile_netchile
Chile_emplressa_de_transporte_de_senales
Chile_hogar_de_cristo
Chile_movistart
Chile_telefonica_ctc
China
Colombia_movistar
Colombia_etb
Colombia_une_epm
Comoros
Congo
Cook_islands
Costa_rica
Cote_divoire
Croatia
Cuba
Curacao
Cyprus
Czech_rep
Dem_peoples_rep_of_korea
Dem_rep_of_the_congo
Denmark
Diego_garcia
Djibouti
Dominica
Dominican_rep
Ecuador
Egypt
El_salvador
Equatorial_guinea
Eritrea
Estonia
Ethiopia
Falkland_islands_malvinas
Faroe_islands
Fiji
Finland
France
French_departments_and_territories_in_the_indian_ocean
French_guiana
French_polynesia
Gabon
Gambia
Georgia
Germany
Ghana
Gibraltar
Greece
Greenland
Grenada
Guadeloupe
Guam
Guatemala
Guinea
Guineabissau
Guyana
Haiti
Honduras
Hong_kong_china
Hungary
Iceland
India
Indonesia_indosat
Indonesia_telcom
Indonesia_bakrie_telecom
Iran
Iraq
Ireland
Israel_kod_gisha
Israel_smile_tikshoret
Israel_netvision
Italy
Jamaica
Japan
Jordan
Kazakhstan
Kenya
Kiribati
Korea
Kuwait
Kyrgyzstan
Lao_pdr
Latvia
Lebanon
Lesotho
Liberia
Libya
Liechtenstein
Lithuania
Luxembourg
Macao_china
Madagascar
Malawi
Malaysia
Maldives
Mali
Malta
Marshall_islands
Martinique
Mauritania
Mauritius
Mexico
Micronesia
Moldova_republic_of
Monaco
Mongolia
Montenegro
Montserrat
Morocco
Mozambique
Myanmar
Namibia
Nauru
Nepal
Netherlands
New_caledonia
New_zealand
Nicaragua
Niger
Nigeria
Niue
Northern_marianas
Norway
Oman
Pakistan
Palau
Panama
Papua_new_guinea
Paraguay
Peru
Philippines
Poland
Portugal
Puerto_rico
Qatar
Romania
Russian_federation
Rwanda
Saint_helena_ascension_and_tristan_da_cunha
Saint_kitts_and_nevis
Saint_lucia
Saint_pierre_and_miquelon
Saint_vincent_and_the_grenadines
Samoa
San_marino
Sao_tome_and_principe
Saudi_arabia
Senegal
Serbia
Seychelles
Sierra_leone
Singapore
Sint_maarten
Slovakia
Slovenia
Solomon_islands
Somalia
South_africa
South_sudan
Spain
Sri_lanka
Sudan
Suriname
Swaziland
Sweden
Switzerland
Syrian_arab_republic
Taiwan_china
Tajikistan
Tanzania
Thailand
The_former_yugoslav_republic_of_macedonia
Timorleste
Togo
Tokelau
Tonga
Trinidad_and_tobago
Tunisia
Turkey
Turkmenistan
Turks_and_caicos_islands
Tuvalu
Uganda
Ukraine
United_arab_emirates
United_kingdom
United_states
United_states_virgin_islands
Uruguay
Uzbekistan
Vanuatu
Vatican
Venezuela_bolivarian_republic_of
Vietnam
Wallis_and_futuna
Yemen
Zambia
Zimbabwe

Country: From the option menu select the country or region where your telephone system is to be used . . . the international and national prefix is then entered in the Prefix and Area code fields.

International

AreaCodes.0.Int_Prefix

max. 4 digits, 0-9Prefix:

AreaCodes.0.Int_Code

max. 4 digits, 0-9Area code:Local

AreaCodes.0.Local_Prefix

max. 4 digits, 0 - 9Prefix:

AreaCodes.0.Local_Code

max. 8 digits, 0 - 9Area code:Tone Selection

Telephony.0.ToneScheme

Expand

title	ToneScheme

Austria
Belgium
Czech
Denmark
Finland
France
Germany
Retail
Italy
Netherlands
Norway
Poland
Portugal
Slovakia
Spain
Sweden
Switzerland
Turkey
UAE
UK

Tone scheme: Select the country or region whose ring tones are to be used for your phone from the option menu.

Parameter nameValue:minValue:maxValue:AllowedWeb-interface: Settings - Online directories - Public

XMLDir.0.ProviderName

Public

Directory name

XMLDir.0.ServerURL

Server address

XMLDir.0.Username

Username

XMLDir.0.Password

PasswordNetdir.4.ActivatedEnable Public White PagesMaximum number of entries

XMLDir.0.WhitePagesDirName

Directory name

XMLDir.0.StartWithListWP

010: off
1: onNetdir.5.ActivatedEnable Public Yellow Pages

XMLDir.0.YellowPagesDirName

Directory name

XMLDir.0.StartWithListYP

010: off
1: onNetdir.6.ActivatedEnable Public Private Pages

XMLDir.0.PrivatePagesDirName

Directory name

XMLDir.0.StartWithListPP

00: off
1: onWeb-interface: Settings - Online directories - CorporateAccess to LDAP server

LDAPDir.0.DirName

max. 20 charactersDirectory name:???????Enable directory

LDAPDir.0.ServerURL

IP address/ DNS nameServer address: Enter the URL of the LDAP server

LDAPDir.0.ServerPort

1 - 65535Server port: Enter the port the LDAP server expects database requests (Default: 389)

LDAPDir.0.BaseDN

Search base (BaseDN): The LDAP database is hierarchical in design. With the LDAP Search base (BaseDN) parameter, stipulate in which area the search should begin.

LDAPDir.0.Username

max. 254 charactersUsername: Enter a global username for the user access to the LDAP director.

LDAPDir.0.Password

max. 254 charactersPassword: Enter a global password for the user access to the LDAP directory.Search in LDAP database

LDAPDir.0.StartWithList

0 = Off
1 = On

Enable List mode: Define what should be initially shown, when the user opens the LDAP directory

LDAPDir.0.NameFilter

(|(cn=%)(sn=%))Name filter: The name filter decides which attribute is used for the search.

LDAPDir.0.NumberFilter

(|(telephoneNumber=%)(mobile=%))Number filter: The number filter stipulates the criteria for the automatic completion of telephone numbers.

LDAPDir.0.AdditionalFilter1Name

Additional filter #1 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed.

LDAPDir.0.AdditionalFilter1

Additional filter #1 value: Enter the value for the attribute entered in the corresponding name field.

LDAPDir.0.AdditionalFilter2Name

Additional filter #2 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed.LDAPDir.0.AdditionalFilter2Additional filter #2 value: Enter the value for the attribute entered in the corresponding name field.

LDAPDir.0.DisplayName

Display format: In this field you can stipulate how the search result is to be displayed on the handset.

LDAPDir.0.MaxNrOfSearchEntries

50Max. number of search results:Configuration of directory items

LDAPDir.0.ItemFN

First name

LDAPDir.0.ItemLN

Surname

LDAPDir.0.ItemPH

Phone (home)LDAPDir.0.ItemPOPhone (office)LDAPDir.0.ItemPMPhone (mobile)

LDAPDir.0.ItemEM

E-mail

LDAPDir.0.ItemFX

Fax

LDAPDir.0.ItemCP

Company

LDAPDir.0.ItemST

Street

LDAPDir.0.ItemCT

City

LDAPDir.0.ItemZP

Zip

LDAPDir.0.ItemCO

Country

LDAPDir.0.ItemAA

Additional attribute

LDAPDir.0.IsAdditionalAttributeDialable

0 = Off
1 = On

Additional attribute can be dialed:

LDAPDir.0.BookNoLDAPDir.0.MaxNrOfSessions100LDAPDir.0.TlsMode0 - 1

LDAPDir.0.UseIndividualCredentials

0 - 10: off
1: onWeb-interface: Settings - Online directories - XMLWeb-interface: Settings - System - Web configuratorWebUIAccounts.1.PasswordChange Password > New password (Admin)CLI PasswordWeb-interface: Settings - System - Provisioning and configurationProvisioning and configurationProvisioning.global.ProvisioningServermax. 255 characters

Provisioning server: Enter the URL of your provisioning server in the text field.

Web-interface: Settings - System - SecurityAccept all certificatesSecurity.global.HTTPAuthUsernameHTTP Authentication > HTTP digest username

Security.global.HTTPAuthPassword

HTTP Authentication > HTTP digest passwordWeb-interface: Settings - System - System logDmGlobal.0.SysLogEnable010: off
1: onDmGlobal.0.SysLogServerServer addressDmGlobal.0.SysLogServerPortServer port (Default 514)

StateInfo.global.DebugLevelMask

DWED = debug
W = warning
E = error
I = info
T = testSNMP manager addressSNMP manager portWeb-interface: Settings - System - Date and timeDate and timeDmGlobal.0.NtpServer

Fcod

0.europe.pool.ntp.org,1.europe.pool.ntp.org,

2.europe.pool.ntp.org,3.europe.pool.ntp.org

Time server: There are some common time servers preset in the field. Enter your preferred time server in the text field. Multiple time servers can be entered separated by commas. Value: max. 255 characters

DmGlobal.0.TimeZone

Expand

title	Timezones

Africa/Abidjan
Africa/Accra
Africa/Addis Ababa
Africa/Algiers
Africa/Asmara
Africa/Bamako
Africa/Bangui
Africa/Banjul
Africa/Bissau
Africa/Blantyre
Africa/Brazzaville
Africa/Bujumbura
Africa/Casablanca
Africa/Ceuta
Africa/Conakry
Africa/Dakar
Africa/Dar es Salaam
Africa/Djibouti
Africa/Douala
Africa/El Aaiun
Africa/Freetown
Africa/Gaborone
Africa/Harare
Africa/Johannesburg
Africa/Kampala
Africa/Khartoum
Africa/Kigali
Africa/Kinshasa
Africa/Lagos
Africa/Libreville
Africa/Lome
Africa/Luanda
Africa/Lubumbashi
Africa/Lusaka
Africa/Malabo
Africa/Maputo
Africa/Maseru
Africa/Mbabane
Africa/Mogadishu
Africa/Monrovia
Africa/Nairobi
Africa/Ndjamena
Africa/Niamey
Africa/Nouakchott
Africa/Ouagadougou
Africa/Porto-Novo
Africa/Sao Tome
Africa/Tripoli
Africa/Tunis
Africa/Windhoek
America/Adak
America/Anchorage
America/Anguilla
America/Antigua
America/Araguaina
America/Argentina/Buenos Aires
America/Argentina/Catamarca
America/Argentina/Cordoba
America/Argentina/Jujuy
America/Argentina/La Rioja
America/Argentina/Mendoza
America/Argentina/Rio Gallegos
America/Argentina/Salta
America/Argentina/San Juan
America/Argentina/Tucuman
America/Argentina/Ushuaia
America/Aruba
America/Asuncion
America/Atikokan
America/Bahia
America/Barbados
America/Belem
America/Belize
America/Blanc-Sablon
America/Boa Vista
America/Bogota
America/Boise
America/Cambridge Bay
America/Campo Grande
America/Cancun
America/Caracas
America/Cayenne
America/Cayman
America/Chicago
America/Chihuahua
America/Costa Rica
America/Cuiaba
America/Curacao
America/Danmarkshavn
America/Dawson
America/Dawson Creek
America/Denver
America/Detroit
America/Dominica
America/Edmonton
America/Eirunepe
America/El Salvador
America/Fortaleza
America/Glace Bay
America/Goose Bay
America/Grand Turk
America/Grenada
America/Guadeloupe
America/Guatemala
America/Guayaquil
America/Guyana
America/Halifax
America/Havana
America/Hermosillo
America/Indiana/Indianapolis
America/Indiana/Knox
America/Indiana/Marengo
America/Indiana/Petersburg
America/Indiana/Tell City
America/Indiana/Vevay
America/Indiana/Vincennes
America/Indiana/Winamac
America/Inuvik
America/Iqaluit
America/Jamaica
America/Juneau
America/Kentucky/Louisville
America/Kentucky/Monticello
America/La Paz
America/Lima
America/Los Angeles
America/Maceio
America/Managua
America/Manaus
America/Marigot
America/Martinique
America/Matamoros
America/Mazatlan
America/Menominee
America/Merida
America/Mexico City
America/Miquelon
America/Moncton
America/Monterrey
America/Montevideo
America/Montreal
America/Montserrat
America/Nassau
America/New York
America/Nipigon
America/Nome
America/Noronha
America/North Dakota/Center
America/North Dakota/New Salem
America/Ojinaga
America/Panama
America/Pangnirtung
America/Paramaribo
America/Phoenix
America/Port of Spain
America/Port-au-Prince
America/Porto Velho
America/Puerto Rico
America/Rainy River
America/Rankin Inlet
America/Recife
America/Regina
America/Rio Branco
America/Santa Isabel
America/Santarem
America/Santo Domingo
America/Sao Paulo
America/Scoresbysund
America/Shiprock
America/St Barthelemy
America/St Johns
America/St Kitts
America/St Lucia
America/St Thomas
America/St Vincent
America/Swift Current
America/Tegucigalpa
America/Thule
America/Thunder Bay
America/Tijuana
America/Toronto
America/Tortola
America/Vancouver
America/Whitehorse
America/Winnipeg
America/Yakutat
America/Yellowknife
Antarctica/Casey
Antarctica/Davis
Antarctica/DumontDUrville
Antarctica/Macquarie
Antarctica/Mawson
Antarctica/McMurdo
Antarctica/Rothera
Antarctica/South Pole
Antarctica/Syowa
Antarctica/Vostok
Arctic/Longyearbyen
Asia/Aden
Asia/Almaty
Asia/Anadyr
Asia/Aqtau
Asia/Aqtobe
Asia/Ashgabat
Asia/Baghdad
Asia/Bahrain
Asia/Baku
Asia/Bangkok
Asia/Beirut
Asia/Bishkek
Asia/Brunei
Asia/Choibalsan
Asia/Chongqing
Asia/Colombo
Asia/Damascus
Asia/Dhaka
Asia/Dili
Asia/Dubai
Asia/Dushanbe
Asia/Gaza
Asia/Harbin
Asia/Ho Chi Minh
Asia/Hong Kong
Asia/Hovd
Asia/Irkutsk
Asia/Jakarta
Asia/Jayapura
Asia/Kabul
Asia/Kamchatka
Asia/Karachi
Asia/Kashgar
Asia/Kathmandu
Asia/Kolkata
Asia/Krasnoyarsk
Asia/Kuala Lumpur
Asia/Kuching
Asia/Kuwait
Asia/Macau
Asia/Magadan
Asia/Makassar
Asia/Manila
Asia/Muscat
Asia/Nicosia
Asia/Novokuznetsk
Asia/Novosibirsk
Asia/Omsk
Asia/Oral
Asia/Phnom Penh
Asia/Pontianak
Asia/Pyongyang
Asia/Qatar
Asia/Qyzylorda
Asia/Rangoon
Asia/Riyadh
Asia/Sakhalin
Asia/Samarkand
Asia/Seoul
Asia/Shanghai
Asia/Singapore
Asia/Taipei
Asia/Tashkent
Asia/Tbilisi
Asia/Tehran
Asia/Thimphu
Asia/Tokyo
Asia/Ulaanbaatar
Asia/Urumqi
Asia/Vientiane
Asia/Vladivostok
Asia/Yakutsk
Asia/Yekaterinburg
Asia/Yerevan
Atlantic/Azores
Atlantic/Bermuda
Atlantic/Canary
Atlantic/Cape Verde
Atlantic/Faroe
Atlantic/Madeira
Atlantic/Reykjavik
Atlantic/South Georgia
Atlantic/St Helena
Atlantic/Stanley
Australia/Adelaide
Australia/Brisbane
Australia/Broken Hill
Australia/Currie
Australia/Darwin
Australia/Eucla
Australia/Hobart
Australia/Lindeman
Australia/Lord Howe
Australia/Melbourne
Australia/Perth
Australia/Sydney
Europe/Amsterdam
Europe/Andorra
Europe/Athens
Europe/Belgrade
Europe/Berlin
Europe/Bratislava
Europe/Brussels
Europe/Bucharest
Europe/Budapest
Europe/Chisinau
Europe/Copenhagen
Europe/Dublin
Europe/Gibraltar
Europe/Guernsey
Europe/Helsinki
Europe/Isle of Man
Europe/Istanbul
Europe/Jersey
Europe/Kaliningrad
Europe/Kiev
Europe/Lisbon
Europe/Ljubljana
Europe/London
Europe/Luxembourg
Europe/Madrid
Europe/Malta
Europe/Mariehamn
Europe/Minsk
Europe/Monaco
Europe/Moscow
Europe/Oslo
Europe/Paris
Europe/Podgorica
Europe/Prague
Europe/Riga
Europe/Rome
Europe/Samara
Europe/San Marino
Europe/Sarajevo
Europe/Simferopol
Europe/Skopje
Europe/Sofia
Europe/Stockholm
Europe/Tallinn
Europe/Tirane
Europe/Uzhgorod
Europe/Vaduz
Europe/Vatican
Europe/Vienna
Europe/Vilnius
Europe/Volgograd
Europe/Warsaw
Europe/Zagreb
Europe/Zaporozhye
Europe/Zurich
Indian/Antananarivo
Indian/Chagos
Indian/Christmas
Indian/Cocos
Indian/Comoro
Indian/Kerguelen
Indian/Mahe
Indian/Maldives
Indian/Mauritius
Indian/Mayotte
Indian/Reunion
Pacific/Apia
Pacific/Auckland
Pacific/Chatham
Pacific/Efate
Pacific/Enderbury
Pacific/Fakaofo
Pacific/Fiji
Pacific/Funafuti
Pacific/Galapagos
Pacific/Gambier
Pacific/Guadalcanal
Pacific/Guam
Pacific/Honolulu
Pacific/Johnston
Pacific/Kiritimati
Pacific/Kosrae
Pacific/Kwajalein
Pacific/Majuro
Pacific/Marquesas
Pacific/Midway
Pacific/Nauru
Pacific/Niue
Pacific/Norfolk
Pacific/Noumea
Pacific/Pago Pago
Pacific/Palau
Pacific/Pitcairn
Pacific/Ponape
Pacific/Port Moresby
Pacific/Rarotonga
Pacific/Saipan
Pacific/Tahiti
Pacific/Tarawa
Pacific/Tongatapu
Pacific/Truk
Pacific/Wake
Pacific/Wallis

Time Zone:

Act as Local Time ServerWeb-interface: Settings - System - Date and timeURL to firmware filePlanned scheduleHidden ParametersDmGlobal.0.DECTCipherDisable

> disable ciphering
0: off
1: on

DmGlobal.0.DECTEcoMode

> eco mode
0: off
1: on

DmGlobal.0.DECTEnhancedEncryption

> enhanced encryption
0: off
1: on

DmGlobal.0.DECTBlindslots

> blind slot configuration (12 slots)
bit 0x0800 = slot 0
bit 0x0001 = slot 11

DmGlobal.0.DECTAvailFrequencies

> available frequencies configuration (10 f.)
> this can be used to disable frequencies
> frequencies blocked by reg-domain will not be enabled by this setting
bit 0x0200 = channel 0
bit 0x0001 = channel 9

DmGlobal.0.DECTCfSettings

> cf mode
> bit 0..3 = number of fragments used for cf
bit 7=0: off
bit 7=1: on

DmGlobal.0.DECTTBR6Mode

> DECT TBR6 test mode
0: off
1: on

DmGlobal.0.DectEchoConfig

> DECT echo configuration mask:
bit 0x01: BS DECT echo cancellor allowed
bit 0x02: BS DECT echo suppressor allowed
bit 0x04: HS suppessor allowed
bit 0x80: force BS echo suppressor/cancellor

DmGlobal.0.NetworkEchoConfig> BS network echo configuration:
bit 0x01: BS network suppressor on

RingToneName0

Internal Calls

Internal calls name (This can not be changed)

SipRingtones.<0-19>.RingInfo0

info=alert-internal

Internal calls Alert-Info pattern

SipRingtones.<0-19>.RingToneName1

External Calls

External calls name

SipRingtones.<0-19>.RingInfo1

info=alert-external

External calls Alert-Info pattern

SipRingtones.<0-19>.RingToneName2

Group Calls

Group calls name

SipRingtones.<0-19>.RingInfo2

info=alert-group

Group calls Alert-Info pattern

SipRingtones.<0-19>.RingToneName3

Door station

Door station name

SipRingtones.<0-19>.RingInfo3

info=alert-door

Door stations Alert-Info pattern

SipRingtones.<0-19>.RingToneName4

Emergency

Emergency name

SipRingtones.<0-19>.RingInfo4

info=alert-emergency

Emergency Alert-Info pattern

SipRingtones.<0-19>.RingToneName5

Optional

Optional Name

SipRingtones.<0-19>.RingInfo5

By default this is empty

Optional Alert-Info pattern

DmGlobal.0.SupportSipRingtones

0 = Disabled
1 = Enabled (Default)

Disable Distinctive ring (Option is not available in the web-interface)

SipRingtones.0.DefaultTone

0 = Internal
1 = External (Default)
2 = Group
3 = Door
4 = Emergency
5 = Optional

The tone played when the Alert info header is not recognized. By default the External ringtone is played. (Option is not available in the web-interface)

Settings for Codecs

SipProvider.<0-19>.ActiveCodecs

0 = g711u
8 = g711a
9 = g722
18 = g729

Example: 18,9,8,0

Active codecs:

SipProvider.<0-19>.RTPPtime

10, 20, 30

RTP Packetisation Time (ptime): Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet.

SipProvider.<0-19>.HoldType

0 = Inactive
1 = Sendonly (Default)

Signalling options for 'Hold' in Session Description Protocol (SDP): Call hold means that a user request to put an active call on hold. The holding part sends a re‑INVITE request to the held client with an SDP offer (Session Description Protocol). This SDP offer contains the attribute line a=inactive or a=sendonly.

SipProvider.<0-19>.CT_HoldTT_Attended

0 = No
1 = Yes

Hold towards Transfer-Target: The device enables call transfer after consultation or without consultation. Define, whether a consultation call with transfer target is put on-hold prior to the execution of the call transfer (Yes) or not (No)

Display of Caller Information

SipProvider.<0-19>.CLIPSource

0 = FROM
1 = PPI+FROM
2 = PAI+PPI+FROM (Default)

Calling Party (User Part): From the option menu select which information is allowed to be transferred to the receiving part within the SIP header. Which information is actually transferred is determined by the provider.

Service Codes

SipProvider.<0-19>.ServiceCode_CC_On

Call Completion on (CCBS, CCNR):

SipProvider.<0-19>.ServiceCode_CC_Off

Call Completion off (CCBS, CCNR):

CSTA

SipProvider.<0-19>.CSTA_IsActive

0 = No
1 = Yes

Active: Computer Supported Telecommunications Applications is a standard for the interaction between a computer and a PBX, independently from the manufacturer. If your PBX provides CSTA applications to be used by the registered handsets you have to activate the standard here.

SipProvider.<0-19>.CSTA_IsExternal

0 = No
1 = Yes

External:

SipProvider.<0-19>.CSTA_Address

Address: CSTA server address

SipProvider.<0-19>.CSTA_Port

Port: CSTA port, default 5060

SipProvider.<0-19>.CSTA_RegServerRefreshTimer

600

CSTA Refresh timer, default 600 seconds

SipProvider.<0-19>.CSTA_DnsQuery

0 = A
1 = SRV +A

DNS query:

SipProvider.<0-19>.CSTA_TransportProtocol

1 = UDP
2 = TCP
3 = TLS

CSTA protocol

Web-interface: Settings - Mobile devices

Global Settings

DmGlobal.0.HSIdleDisplay

0 = Username
1 = Display name

Displayed name in idle display:

Web-interface: Settings - Mobile devices - Administration

Mobile device

hs.<ipui>.Ipui

IPUI: (International Portable User Identity) Unique identifier of a handset within the DECT network. If you edit an existing handset registration entry, the IPUI is shown and cannot be changed.

hs.<ipui>.RegStatus

ToReg = "To Register", add new Handset
ToDeReg = "To DeRegister", delete existing HS
NotReg = "Not Registered", default value

RegStatus: DECT registration status of the handset entry.

hs.<ipui>.DECT_AC

min. 1, max. 4 digits

Authentication Code (PIN): This PIN must be used on the handset to register with the DECT network.

Personal provider data

SipAccount.<ipui>.AuthName

Max. 74 characters

SIP Authentication name: Specify the SIP authentication (HTTP digest) name. The Authentication name acts as access ID when registering with the SIP proxy/registrar server. It is usually identical to the phone number for the VoIP account.

SipAccount.<ipui>.AuthPassword

Max. 74 characters

SIP Authentication password: Enter the password for SIP authentication (HTTP digest). The phone needs the password when registering with the SIP proxy/registrar server.

SipAccount.<ipui>.UserName

Max. 74 characters

SIP Username: Enter the caller ID for the VoIP provider account. It is usually identical to the phone number for the VoIP account.

SipAccount.<ipui>.DisplayName

Max. 74 characters

SIP Display name:

SipAccount.<ipui>.ProviderId

0 - 19

VoIP provider:

Online directories

hs.<ipui>.DirectAccessDir

See this wiki page.

Directory for direct access: The user can press and hold the directory key (bottom of the control key) to open either the list of online directories or the local directory of the handset. Choose which directory is called up with the directory key.

hs.<ipui>.IntKeyDir

See this wiki page.

Corporate directory for INT key: If a corporate directory is available and configured the user can open it by pressing the INT key (left on the handset’s control key). Choose from the list which corporate directory is opened with the INT key.

hs.<ipui>.AutoLookupDir

See this wiki page.

Automatic look-up: Select an online directory from the list for Automatic look-up or deactivate this option. When there is an incoming call, the caller's name is read from this directory and shown in the display (the availability of this function depends on the online directory provider).

LDAP authentication

hs.<ipui>.LDAPId

255 = None

0 = LDAP 1
1 = LDAP 2
...

Selected LDAP book: Select the LDAP directory to be provided on the handset from the option menu.

hs.<ipui>.LDAPShowProviders

0 = No
1 = Yes

Show other LDAP servers: Select Yes if directories of other LDAP servers should be allowed to be shown.

hs.<ipui>.LDAPAuthType

0 = Global
1 = User
2 = SIP

LDAP authorization type: Select how the user authentication should be performed:

Global: Credentials are set for all handsets during the LDAP directory set-up.
User: Individual credentials are used.
SIP: The credentials for the user’s SIP account are used (Authentication name and Authentication password).

hs.<ipui>.LDAPUsername

Max. 254 characters

LDAP Username: Enter the user name for individually accessing the LDAP directory.

hs.<ipui>.LDAPPassword

Max. 254 characters

LDAP Password: Enter the password for individually accessing the LDAP directory.

Network mailbox configuration

SipAccount.<ipui>.VoiceMailMailbox

Call number or SIP name (URI): Enter the Call number or SIP name (URI) for the network mailbox.

SipAccount.<ipui>.VoiceMailActive

0 = Disabled
1 = Enabled

Activate Voicemail box

Group pick-up

SipAccount.<ipui>.OpenScapeGroupPickupAddress

Call number or SIP name (URI): Enter the Call number or SIP name (URI) of the pick-up group.

SipAccount.<ipui>.OpenScapeGroupPickupActive

0 = Disabled
1 = Enabled

Activate group pick-up

DmGlobal.0.CallPickUpAlertCall

0 = Disable: Notification tone is played

1 = Enable: Notification tone and Ringtone is played

Not available in the web-interface

Call manager

hs.<ipui>.CallManagerCallsVia

No
Headset
Handsfree

Accept calls directly via Call Manager: From the option menu select whether calls that are transferred via the PBX call manager are to be accepted directly via Headset, via Handsfree or not at all (No).

Missed calls and alarms

hs.<ipui>.SaveMissedCalls

0 = No
1 = Yes

Missed/accepted calls count: Select Yes/No, to activate/deactivate the call counter for missed and accepted calls. The information is displayed in the handset’s call lists, missed calls are also shown on the handset’s idle display.

hs.<ipui>.SaveAcceptedCalls

0 = No
1 = Yes

Accepted calls count

hs.<ipui>.ShowMissedCalls

0 = No
1 = Yes

Flashing LED (MWI) for missed calls: Select Yes/No, to activate/deactivate the MWI LED on the handset’s message key for missed calls.

hs.<ipui>.ShowMissedAlarms

0 = No
1 = Yes

Flashing LED (MWI) for missed alarms: Select Yes/No, to activate/deactivate the MWI LED on the handset’s message key for missed alarms.

hs.<ipui>.ShowMissedNetAM

0 = No
1 = Yes

Flashing LED (MWI) for network mailbox: Select Yes/No, to activate/deactivate the MWI LED on the handset’s message key for new messages on the network mailbox.

CallWaiting

SipAccount.<ipui>.CallWaiting

0 = No
1 = Yes

Enable or disable call waiting, setting is not available in the web-interface.

CSTA

SipAccount.<ipui>.CSTA_Username

Username

SipAccount.<ipui>.CSTA_AuthName

Authentication name

SipAccount.<ipui>.CSTA_AuthPassword

Authentication password

Broadsoft XSI services

hs.<ipui>.XsiSip

0 = No
1 = Yes

Use SIP credentials: If activated, the credentials for the user’s SIP account (Authentication name and Authentication password are used.

hs.<ipui>.XsiUsername

Username: Enter a user name for the user access to the menu (max. 22 characters).

hs.<ipui>.XsiPassword

Password: Enter a password for the user access to the menu (max. 8 characters).

Feature key synchronization

SipAccount.<ipui>.FeatureKeySyncActive

0 = No
1 = Yes

Feature key synchronization: This option permits the users to use keys on their phones to handle Do Not Disturb and Call Forwarding. If activated, the phones synchronise with the BroadWorks Application server on the status of these features.

Web-interface: Settings - Mobile devices - Registration Center

See wiki article.

Web-interface: Settings - Telephony - Audio

Audio

DmGlobal.0.WidebandEnabled

0 = Wideband with codec G.722 disabled
1 = Wideband with codec G.722 enabled

Web-interface: Settings - Telephony - Call settings

Call Transfer

Telephony.0.CT_ViaRKey

0 = No
1 = Yes

Call transfer via R key: Activated: Users can connect two external callers with each other by pressing the R key. The connections with both parties are terminated.

Telephony.0.CT_ByOnHook

0 = No
1 = Yes

Transfer call by on-hook: Activated: The two participants are connected with one another when the user presses the end call key. The intermediary's connections with the participants are terminated.

Telephony.0.CT_DeriveTargetAddress

sipurl
sipcontact

Determine transfer target address: Select how the transfer target address (Refer-To URI) is to be derived: From transfer target's AOR (Address of Record). From transfer target's transport address (Contact URI)

Access Code

Telephony.0.AccessCode

max. 3 digits (0 - 9, *, R, #, P)

Access Code:

Telephony.0.AccessCodeFor

0x0003 = From incoming calls list
0x0150 = From network directory
0x0153 = From incoming calls list+From network directory
0x7557 = Always

Is added to numbers: Select when the phone numbers should be automatically prefixed with the digits, e.g. when dialling from a call list or a directory.

Area Codes

AreaCodes.0.Country

Expand

title	Areacodes

Afghanistan
Albania
Algeria
American_samoa
Andorra
Angola
Anguilla
Antigua_and_barbuda
Argentina
Armenia
Aruba
Australia
Australian_external_territories
Austria
Azerbaijan
Bahamas
Bahrain
Bangladesh
Barbados
Belarus
Belgium
Belize
Benin
Bermuda
Bhutan
Bolivia_plurinational_state_of
Bonaire_sint_eustatius_and_saba
Bosnia_and_herzegovina
Botswana
Brazil
British_virgin_islands
Brunei_darussalam
Bulgaria
Burkina_faso
Burundi
Cambodia_telecom_cambodia
Cambodia_royal_telecom_international
Cameroon
Canada
Cape_verde
Cayman_islands
Central_african_rep
Chad
Chile_claro_chile
Chile_vtr_chile
Chile_convergia_chile
Chile_transam
Chile_enewcarriercom_chile
Chile_empresa_de_telecomunicaciones_netonone
Chile_heilsberg
Chile_concert_chile
Chile_globus
Chile_telefonica_del_sur
Chile_gtd_manquehue
Chile_entel_larga_distancia
Chile_gsp_chile
Chile_equant_chile
Chile_sur_telecomunicaciones
Chile_astro
Chile_stelchile_sa
Chile_micarrier_telecomunicaciones
Chile_fibersat
Chile_carrier_169
Chile_impsat_chile
Chile_global_crossing
Chile_netchile
Chile_emplressa_de_transporte_de_senales
Chile_hogar_de_cristo
Chile_movistart
Chile_telefonica_ctc
China
Colombia_movistar
Colombia_etb
Colombia_une_epm
Comoros
Congo
Cook_islands
Costa_rica
Cote_divoire
Croatia
Cuba
Curacao
Cyprus
Czech_republic
Dem_peoples_rep_of_korea
Dem_rep_of_the_congo
Denmark
Diego_garcia
Djibouti
Dominica
Dominican_rep
Ecuador
Egypt
El_salvador
Equatorial_guinea
Eritrea
Estonia
Ethiopia
Falkland_islands_malvinas
Faroe_islands
Fiji
Finland
France
French_departments_and_territories_in_the_indian_ocean
French_guiana
French_polynesia
Gabon
Gambia
Georgia
Germany
Ghana
Gibraltar
Greece
Greenland
Grenada
Guadeloupe
Guam
Guatemala
Guinea
Guineabissau
Guyana
Haiti
Honduras
Hong_kong_china
Hungary
Iceland
India
Indonesia_indosat
Indonesia_telcom
Indonesia_bakrie_telecom
Iran
Iraq
Ireland
Israel_kod_gisha
Israel_smile_tikshoret
Israel_netvision
Italy
Jamaica
Japan
Jordan
Kazakhstan
Kenya
Kiribati
Korea
Kuwait
Kyrgyzstan
Lao_pdr
Latvia
Lebanon
Lesotho
Liberia
Libya
Liechtenstein
Lithuania
Luxembourg
Macao_china
Madagascar
Malawi
Malaysia
Maldives
Mali
Malta
Marshall_islands
Martinique
Mauritania
Mauritius
Mexico
Micronesia
Moldova_republic_of
Monaco
Mongolia
Montenegro
Montserrat
Morocco
Mozambique
Myanmar
Namibia
Nauru
Nepal
Netherlands
New_caledonia
New_zealand
Nicaragua
Niger
Nigeria
Niue
Northern_marianas
Norway
Oman
Pakistan
Palau
Panama
Papua_new_guinea
Paraguay
Peru
Philippines
Poland
Portugal
Puerto_rico
Qatar
Romania
Russian_federation
Rwanda
Saint_helena_ascension_and_tristan_da_cunha
Saint_kitts_and_nevis
Saint_lucia
Saint_pierre_and_miquelon
Saint_vincent_and_the_grenadines
Samoa
San_marino
Sao_tome_and_principe
Saudi_arabia
Senegal
Serbia
Seychelles
Sierra_leone
Singapore
Sint_maarten
Slovakia
Slovenia
Solomon_islands
Somalia
South_africa
South_sudan
Spain
Sri_lanka
Sudan
Suriname
Swaziland
Sweden
Switzerland
Syrian_arab_republic
Taiwan_china
Tajikistan
Tanzania
Thailand
The_former_yugoslav_republic_of_macedonia
Timorleste
Togo
Tokelau
Tonga
Trinidad_and_tobago
Tunisia
Turkey
Turkmenistan
Turks_and_caicos_islands
Tuvalu
Uganda
Ukraine
United_arab_emirates
United_kingdom
United_states
United_states_virgin_islands
Uruguay
Uzbekistan
Vanuatu
Vatican
Venezuela_bolivarian_republic_of
Vietnam
Wallis_and_futuna
Yemen
Zambia
Zimbabwe

Country: From the option menu select the country or region where your telephone system is to be used . . . the international and national prefix is then entered in the Prefix and Area code fields.

International

AreaCodes.0.Int_Prefix

max. 4 digits, 0-9

Prefix: Enter the prefix of the international area code.

AreaCodes.0.Int_Code

max. 4 digits, 0-9

Area code: Enter the international area code.

Local

AreaCodes.0.Local_Prefix

max. 4 digits, 0 - 9

Prefix: Enter the prefix of the local area code. These digits are placed in front of the local area code for national long-distance calls.

AreaCodes.0.Local_Code

max. 8 digits, 0 - 9

Area code: Enter the local area code for your town/city (depending on country/provider)

AreaCodes.0.UseAreaCode

0 = No
1 = For local and national calls
2 = For Local

Use area code:

Tone Selection

Telephony.0.ToneScheme

Expand

title	ToneScheme

Austria
Belgium
Czech
Denmark
Finland
France
Germany
Greece
Retail
Italy
Netherlands
Norway
Poland
Portugal
RUSSIAN_FEDERATION
Slovakia
Slovenia
Spain
Sweden
Switzerland
Turkey
UAE
UK

Tone scheme: Select the country or region whose ring tones are to be used for your phone from the option menu.

Web-interface: Settings - Telephony - VoIP

SIP

DmGlobal.0.Port

Range: 1-65535; Default: 5060

SIP port: Enter the SIP port used for VoIP connections.

DmGlobal.0.TLS_Port

Range: 1-65535; Default: 5061

Secure SIP port: Enter the SIP port used for secure VoIP connections (TLS).

dm.local.RtpBasePort

Default: 5004

RTP port: Not available in the web-interface

DmGlobal.0.Timers_T1

Default: 500 ms

SIP timer T1: Enter the estimated round trip time of an IP packet between a SIP client and a SIP server (the time it takes between sending out the request to the point of getting a response).

DmGlobal.0.Timers_Session

Max. 4 digits, min. 90 sec; Default: 1800 sec;

SIP session timer: Defines a session expiry interval: If the session isn't refreshed within the interval, the session is released. Session refresh is started after half of the interval by a re-INVITE message, which the peer side has to confirm to get the session refreshed.

DmGlobal.0.Timers_FailedRegistration

Max. 4 digits, min. 10 sec; Default: 300 sec;

Failed registration retry timer: Specify after how many seconds the phone should attempt to reregister when the initial registration has failed.

DmGlobal.0.Timers_Subscription

Default: 1800 s

Subscription timer: Defines the expiration time (in seconds) of a subscription. In order to keep subscriptions effective, subscribers need to refresh subscriptions on a periodic basis.

DmGlobal.0.PRACK

0 = PRACK disabled
1 = PRACK enabled

PRACK: (Provisional Response Acknowledgement) SIP provisional responses do not have an acknowledgement system so they are not reliable. The PRACK method guarantees a reliable and ordered delivery of provisional responses in SIP.

Quality of Service (QoS)

DmGlobal.0.QoS_SIP_DSCP

0 - 63

SIP ToS / DiffServ: Enter your chosen QoS DiffServ class for SIP data packets.

DmGlobal.0.QoS_RTP_DSCP

0 - 63

RTP ToS / DiffServ: Enter your chosen QoS DiffServ class for RTP data packets.

XSI services

XSIDir.1.ServerURL

Server address

DmGlobal.0.XSINetdirs

0 = Off
1 = On

Enable XSI directories

DmGlobal.0.XSICallLogs

0 = Off
1 = On

Enable XSI call logs

XSIDir.1.Api

com.broadsoft.xsi-actions/v2.0

Not in web-interface

Web-interface: Settings - Online directories - Corporate

Access to LDAP server

LDAPDir.0.DirName

Max. 20 characters

Directory name: Enter a name in the field . This is the name under which the directory will be displayed on the handsets

Netdir.<x>.Activated

0 = LDAP 1, 7 = LDAP 2, 8 = LDAP 3, 9 = LDAP 4, 10 = LDAP 5, 11 = LDAP 6
12 = LDAP 7, 13 = LDAP 8, 14 = LDAP 9, 15 = LDAP 10

0 = Off
1 = On

Enable directory:

LDAPDir.0.ServerURL

IP address/ DNS name

Server address: Enter the URL of the LDAP server

LDAPDir.0.ServerPort

1 - 65535 (Default: 389)

Server port: Enter the port the LDAP server expects database requests

LDAPDir.0.BaseDN

Default: 0, the search starts at the upper area of the LDAP database.

Search base (BaseDN): The LDAP database is hierarchical in design. With the LDAP Search base (BaseDN) parameter, stipulate in which area the search should begin.

LDAPDir.0.Username

max. 254 characters

Username: Enter a global username for the user access to the LDAP director.

LDAPDir.0.Password

max. 254 characters

Password: Enter a global password for the user access to the LDAP directory.

LDAPDir.0.TlsMode

0 = Off
1 =
2 =

Secure LDAP:

Search in LDAP database

LDAPDir.0.StartWithList

0 = Off
1 = On

Enable List mode: Define what should be initially shown, when the user opens the LDAP directory

LDAPDir.0.NameFilter

(|(cn=%)(sn=%))

Name filter: The name filter decides which attribute is used for the search.

LDAPDir.0.NumberFilter

(|(telephoneNumber=%)(mobile=%))

Number filter: The number filter stipulates the criteria for the automatic completion of telephone numbers.

LDAPDir.0.AdditionalFilter1Name

Additional filter #1 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed.

LDAPDir.0.AdditionalFilter1

Additional filter #1 value: Enter the value for the attribute entered in the corresponding name field.

LDAPDir.0.AdditionalFilter2Name

Additional filter #2 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed.

LDAPDir.0.AdditionalFilter2

Additional filter #2 value: Enter the value for the attribute entered in the corresponding name field.

LDAPDir.0.DisplayName

Display format: In this field you can stipulate how the search result is to be displayed on the handset.

LDAPDir.0.MaxNrOfSearchEntries

50

Max. number of search results:

Configuration of directory items

LDAPDir.0.ItemFN

First name

LDAPDir.0.ItemLN

Surname

LDAPDir.0.ItemPH

Phone (home)

LDAPDir.0.ItemPO

Phone (office)

LDAPDir.0.ItemPM

Phone (mobile)

LDAPDir.0.ItemEM

E-mail

LDAPDir.0.ItemFX

Fax

LDAPDir.0.ItemCP

Company

LDAPDir.0.ItemST

Street

LDAPDir.0.ItemCT

City

LDAPDir.0.ItemZP

Zip

LDAPDir.0.ItemCO

Country

LDAPDir.0.ItemAA

Additional attribute

LDAPDir.0.IsAdditionalAttributeDialable

0 = Disabled
1 = Enabled

Additional attribute can be dialed:

Web-interface: Settings - Online directories - XML

Public Directory via XML Protocol

XMLDir.0.ProviderName

Public

Directory name: Enter a name for the directory. This is the name that will be displayed on the handsets when the user opens the directory list by pressing the directory key.

XMLDir.0.ServerURL

Server address: Enter the URL of the online directory provider.

XMLDir.0.Username

Username: Enter a global user name for the user access to the online directory.

XMLDir.0.Password

Password: Enter a global password for the user access to the online directory.

XMLDir.0.EntCount

0 = Disabled

> 0 = Enabled

List update / refresh:

Maximum number of entries: Enter the maximum number of entries that are to be downloaded during one reading operation.

XMLDir.0.NumbFilter

1 = Office

2 = Internal

3 = Mobile

4 = Home

5 = Fax

XMLDir.0.HsHasFilter

Public White Pages

Netdir.4.Activated

0 = Disabled
1 = Enabled

Enable Public White Pages: Mark the check box if you want to provide the White Pages of the given provider.

XMLDir.0.WhitePagesDirName

Directory name

XMLDir.0.StartWithListWP

0 = Editor
1 = List

Start mode

Public Yellow Pages

Netdir.5.Activated

0 = Disabled
1 = Enabled

Enable Public Yellow Pages

XMLDir.0.YellowPagesDirName

Directory name

XMLDir.0.StartWithListYP

0 = Editor
1 = List

Start mode

Public Private pages

Netdir.6.Activated

0 = Disabled
1 = Enabled

Enable Public Private Pages

XMLDir.0.PrivatePagesDirName

Directory name

XMLDir.0.StartWithListPP

0 = Editor
1 = List

Start mode

Corporate Directory via XML Protocol

XMLDir.1.ProviderName

Directory name: Enter a name for the directory. This is the name that will be displayed on the handsets when the user opens the directory list by pressing the directory key.

XMLDir.1.ServerURL

Server address: Enter the URL of the online directory provider.

XMLDir.1.Username

Username: Enter a global user name for the user access to the online directory.

XMLDir.1.Password

Password: Enter a global password for the user access to the online directory.

XMLDir.1.EntCount

0 = Disabled

> 0 = Enabled

List update / refresh:

Maximum number of entries: Enter the maximum number of entries that are to be downloaded during one reading operation.

XMLDir.1.NumbFilter

1 = Office

2 = Internal

3 = Mobile

4 = Home

5 = Fax

XMLDir.1.HsHasFilter

Corporate White Pages

Netdir.1.Activated

0 = Disabled
1 = Enabled

Enable White Pages: Mark the check box if you want to provide the White Pages of the given provider.

XMLDir.1.WhitePagesDirName

Directory name: Enter a name for the directory. This is the name that will be displayed on the handsets when the user opens the directory list by pressing the directory key.

XMLDir.1.StartWithListWP

0 = Editor
1 = List

Start mode

Corporate Yellow Pages

Netdir.2.Activated

0 = Disabled
1 = Enabled

Enable Yellow Pages: Mark the check box if you want to provide the Yellow Pages of the given provider.

XMLDir.1.YellowPagesDirName

Directory name:Enter a name for the directory. This is the name that will be displayed on the handsets when the user opens the directory list by pressing the directory key.

XMLDir.1.StartWithListYP

0 = Editor
1 = List

Start mode

Corporate Private Pages

Netdir.3.Activated

0 = Disabled
1 = Enabled

Enable Private Pages: Mark the check box if you want to provide the Yellow Pages of the given provider.

XMLDir.1.PrivatePagesDirName

Directory name:Enter a name for the directory. This is the name that will be displayed on the handsets when the user opens the directory list by pressing the directory key.

XMLDir.1.StartWithListPP

0 = Editor
1 = List

Start mode

Web-interface: Settings - Online directories - XSI

XSI directory

DmGlobal.XSINetdirs

0 = Disabled
1 = Enabled

Enable XSI directories

XSIDir.1.StartWithList

0 = Off
1 = On

XSI Personal directory

Netdir.20.Activated

Enable Personal directory

XSIDir.1.PDirName

Directory name

XSI Group directory

Netdir.18.Activated

Enable Corporate Yellow Pages

XSIDir.1.GDirName

Directory name

XSI Group Common directory

Netdir.19.Activated

Enable Corporate Private Pages

XSIDir.1.GCDirName

Directory name

XSI Enterprise directory

Netdir.16.Activated

Enable Corporate Private Pages

XSIDir.1.EDirName

Directory name

XSI Enterprise Common directory

Netdir.17.Activated

Enable Corporate Private Pages

XSIDir.1.ECDirName

Directory name

Web-interface: Settings - Online Services - Central phonebook

Netdir.21.Activated

0: disabled
1: enabled

Enabled directory

CentralBook.0.Name

Directory name

CentralBook.0.ServerURL

Server address

CentralBook.0.DownloadTime

14:00

Daily refresh time

CentralBook.0.StartWithList

0: No
1: Yes

Enable list mode

CentralBook.0.MaxSearchResult

99

Maximum results for central phone-book search

CentralBook.0.Username

CentralBook.0.Password

Web-interface: Settings - Online Services - XHTML

RapService.< 3-6>.Activated

0: disabled
1: enabled

Activate

RapService.< 3-6>.Name

Name for menu

RapService.< 3-6>.SoftkeyName

Name for Softkey

RapService.< 3-6>.ServerURL

Server address

RapService.< 3-6>.UseSIP

0: No
1: Yes

Use SIP credentials

RapService.< 3-6>.Username

Username

RapService.< 3-6>.Password

Password

RapService.< 3-6>.CallConfirm

DmGlobal.0.AddSipId

0: No
1: Yes

Add SipId

Web-interface: Settings - System - Web configurator

Change password

WebUIAccounts.1.Password

Change Password > New password (Admin)

CLI access via ssh

DmGlobal.0.CliPassword

CLI Password (Admin): Enter a password for the administrator access to the configuration via SSH. Value: min. 8, max. 74 characters

User login

WebUIAccounts.2.Active

0 = deactivated (default)
1 = activated

Activate / deactivate Web configurator User login

WebUIAccounts.2.Password

Add/Change Password User

Web-interface: Settings - System - Provisioning and configuration

Provisioning and configuration

Provisioning.global.ProvisioningServer

max. 255 characters

Provisioning server: Enter the URL of your provisioning server in the text field.

Provisioning.global.Period

Provisioning interval set in seconds
example: every 24 hours is 86400

Web-interface: Settings - System - Security

Certificates

SystemSettings.global.Security_Certificates_AcceptAllCertificates

0 = No
1 = Yes

Accept all certificates: Mark the Yes radio button, If you want to accept all certificates.

HTTP Authentication

Security.global.HTTPAuthUsername

Max. 74 characters

HTTP Authentication: Enter the user name for HTTP authentication.

Security.global.HTTPAuthPassword

Max. 74 characters

HTTP Authentication: Enter the password for HTTP authentication

Web-interface: Settings - System - System log

dm.<DM id>.SysLogEnable

"DM id", you can see in the web-interface:

local (dm.local.SysLogEnable)
dm1 (dm.dm1.SysLogEnable)
dm..
@ for all DECT managers (dm.@.SysLogEnable)

0: Off
1: On

Activate system log:

dm.local.SysLogServer

dm.@.SysLogServer

max. 240 characters

Server address: Enter the IP address or the (fully qualified) DNS name of your Syslog server. Value:

dm.local.SysLogServerPort

dm.@.SysLogServerPort

Range: 1-65535; Default: 514

Server port: Enter the port number, where the Syslog server expects to receive requests.

dm.local.SysLogProtocol

dm.@.SysLogProtocol

tcp

udp

SyslogProtocol

In software 2.36 this setting can't be changed via provisioning, this will be changed.

dm.local.SysLogTlsEnable

dm.@.SysLogTlsEnable

0: Off
1: On

SystemSettings.global.DebugLevelMask

DWEI

D = debug
W = warning
E = error
I = info

Not possible via provisioning

SNMP manager address: Enter the IP address of the SNMP manger.

Not possible via provisioning

SNMP manager port: Enter the port number

Web-interface: Settings - System - Date and time

Date and time

DmGlobal.0.NtpServer

0.europe.pool.ntp.org,1.europe.pool.ntp.org,

2.europe.pool.ntp.org,3.europe.pool.ntp.org

Time server: There are some common time servers preset in the field. Enter your preferred time server in the text field. Multiple time servers can be entered separated by commas. Value: max. 255 characters

DmGlobal.0.TimeZone

Expand

title	Timezones

value="Pacific/Midway"
value="Pacific/Niue"
value="Pacific/Pago_Pago"
value="Pacific/Samoa"

value="Pacific/Honolulu"
value="Pacific/Johnston"
value="Pacific/Rarotonga"
value="Pacific/Tahiti"
value="Pacific/Marquesas"
value="America/Anchorage"
Pacific/Gambier"
value="America/Los_Angeles"
Pacific/Pitcairn"
value="America/Denver"
value="America/Chicago"
Pacific/Easter
Pacific/Galapagos"
value="America/New_York"
value="America/Caracas"
value="America/Sao_Paulo"
value="Europe/Belfast"
value="Europe/Dublin"
value="Europe/Guernsey"
value="Europe/Isle_of_Man"
value="Europe/Jersey"
value="Europe/Lisbon"
value="Europe/London"
value="Greenwich"
value="Europe/Amsterdam"
value="Europe/Andorra"
value="Europe/Belgrade"
value="Europe/Berlin"
value="Europe/Bratislava"
value="Europe/Brussels"
value="Europe/Budapest"
value="Europe/Busingen"
value="Europe/Copenhagen"
value="Europe/Gibraltar"
value="Europe/Ljubljana"
value="Europe/Luxembourg"
value="Europe/Madrid"
value="Europe/Malta"
value="Europe/Monaco"
value="Europe/Oslo"
value="Europe/Paris"
value="Europe/Podgorica"
value="Europe/Prague"
value="Europe/Rome"
value="Europe/San_Marino"
value="Europe/Sarajevo"
value="Europe/Skopje"
value="Europe/Stockholm"
value="Europe/Tirane"
value="Europe/Vaduz"
value="Europe/Vatican"
value="Europe/Vienna"
value="Europe/Warsaw"
value="Europe/Zagreb"
value="Europe/Zurich"
value="Africa/Cairo"
value="Europe/Athens"
value="Europe/Bucharest"
value="Europe/Chisinau"
value="Europe/Helsinki"
value="Europe/Kaliningrad"
value="Europe/Kiev"
value="Europe/Mariehamn"
value="Europe/Nicosia"
value="Europe/Riga"
value="Europe/Sofia"
value="Europe/Tallinn"
value="Europe/Tiraspol"
value="Europe/Uzhgorod"
value="Europe/Vilnius"
value="Europe/Zaporozhye"
value="Europe/Istanbul"
value="Europe/Kirov"
value="Europe/Minsk"
value="Europe/Moscow"
value="Europe/Simferopol"
value="Europe/Volgograd"
value="Asia/Dubai"
value="Europe/Astrakhan"
value="Europe/Samara"
value="Europe/Ulyanovsk"
value="Asia/Karachi"
value="Asia/Dhaka"
value="Asia/Hong_Kong"
value="Asia/Tokyo"
value="Australia/Adelaide"
value="Australia/Darwin"
value="Australia/Brisbane"
value="Australia/Sydney"
value="Pacific/Noumea"

Time Zone:

DmGlobal.0.NtpEnableLocalServer

0 = No
1 = Yes

Act as Local Time Server: In case the internet time servers are not available you can set the time manually.

Web-interface: Settings - System - Firmware

System firmware

FwUpdateUrl

must be placed in <oper.. see wiki

URL to firmware file: In the text field specify the URL of the configuration server where the firmware is located

FwUpdateStart

must be placed in <oper.. see wiki for an example

0 = Immediately
Unix time stamp (See https://www.epochconverter.com/ )

Planned schedule:

Settings - System - DECT settings

Eco DECT

DmGlobal.0.DECTEcoMode

0 = Maximum range
1 = Limited range

DECT Radiation power: Set the DECT radiation power to your needs:

DECT security settings

DmGlobal.0.DECTCipherDisable

0 = Activate
1 = Deactivate

DECT Encryption: Activate/deactivate the option.

DmGlobal.0.DECTEnhancedEncryption

0 = Deactivate
1 = Activate

Enhanced Security - Early Encryption and Re-Keying: Activate/deactivate the option

DmGlobal.0.DECTReleaseUnencrypted

0 = Deactivate
1 = Activate

Enhanced Security - Automatic release for non-encrypted calls: Activate/deactivate the option.

DECT Radio settings

DmGlobal.0.SystemRegDomain

EUR = Europa
LAM = Latin America
BRA = Brazil

DECT Radio band: Select the radio frequency band used in your region.

Hidden Parameters

DmGlobal.0.bLedSignallingActive

0 = LED's off
1 = LED's on

Possibility to turn the LED's on the base Off or On.

DmGlobal.EnableDFFlagForSipPackets

Netdir.<x>.CachingType

For value x see: FAQ N870 - Directories number list

Lookup caching policy

WebUI.1.Language

Page tree

Versions Compared

Old Version 29

New Version 118

Key