Versions Compared

Old Version 2

changes.mady.by.user Reindl Christian

Saved on

compared with

New Version Current

changes.mady.by.user Linton James

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

PortaDial

doorintercom

Door Intercom


Tested with: Gigaset T300/T500 PRO: Software version 4.6.5.0
PortaDial type 1 with 1 pushbutton
PortaDial Interface 3 SIP
 
User-added imageImage RemovedUser-added imageImage Removed
Image AddedImage Added


1. Create SIP account in Gigaset T300/T500

Go to: Configuration - Phones - Add additional Telephones
User-added imageImage Removed

Image Added

Use the settings like in the example above. Use the Password generator to create a secure Password


2. Open the Fasttel Wizard Elite door intercom web-interface

Go to Advanced Settings 1

SIP Server:  IP address of the Gigaset T300/T500  
Outbound Server:  IP address of the Gigaset T300/T500  
SIP User ID:  Telephone name defined in Gigaset T300/T500  
Authenticate ID:  Telephone name defined in Gigaset T300/T500  
Authenticate Password:  Password defined in Gigaset T300/T500  
Send DTMF:  Only activate the option via RTP(RFC2833)  
User-added imageImage Removed

 

Image Added
Image AddedUser-added imageImage Removed


Go to Advanced Settings 2

NTP Server:  IP address of the Gigaset T300/T500 

 

User-added imageImage Removed
Image Added
Image AddedUser-added imageImage Removed
 

Basic Settings
User-added imageImage Removed
Image Added
 

Status

Image AddedUser-added imageImage Removed

 
3. Gigaset User account.

Without a Gigaset user account, the door intercom can be used to dial an internal number. Incoming and Outgoing calls are not possible.

Incoming calls to the door intercom are only possible when the door intercom is assigned to a user.

In the Gigaset T300/T500 Go to: Configuration - Users and create a new user, only to be used for the door intercom (user license).
User-added imageImage Removed
Image Added