Versions Compared

Old Version 4

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version Current

changes.mady.by.user Linton James

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3

Robin Compact SIP Door

...

Intercom

Section
Column
width70%

Tested with: Gigaset T300/T500 PRO: Software version 4.6.5.0

Robin Compact SIP: Software version 2.0.1, Software build 1307, Build type Release

Create SIP account in Gigaset T300/T500

Goto: Configuration - Phones - Add additional Telephones

 

Image Added

 Robinsipaccount.jpgImage Removed

Use the settings like in the example above.

Open

Configure the Robin Compact SIP door intercom web-interface

 Robinbasicteleph.jpgImage Removed

Section

Image Added

Column
width50%

Enter the SIP username and password as defined in the Gigaset T300/T500.

The SIP domain and proxy is the IP address op the Gigaset T300/T500.

Column
width50%

Image Added

Section

Image Added

Column
width50%

Time server: Enter the IP address of the Gigaset T300/T500

Column
width50%

Image Added

Section

Image Added

Column
width50%

Here you can enter the number to be dialled when the door intercom key is pressed. In this example the number 130 is called.

Column
width50%

Image Added

Section

Image Added

Column
width50%

Here you can define which Phone book entry is used when the key is pressed.

Column
width50%

Image Added

Section

Image Added

Column
width50%

Please check if the correct codecs are enabled.

Column
width50%

Image Added

Section
Column
width50%

RobinSIPacc.jpgImage Removed

Door opener activation.

 

To open the door, the following default codes are tested with the Gigaset T300/T500

Column
width50%

Image Added

Gigaset User account.


Without a Gigaset user account, the door intercom can be used to dial an internal number. Incoming and Outgoing calls are not possible.

Incoming calls to the door intercom are only possible when the door intercom is assigned to a user.

In the Gigaset T300/T500 Goto: Configuration - Users and create a new user, only to be used for the door intercom (user license)

 

Image Added 

 

Column
width30%

 

Homepage-robin.pngImage RemovedImage Added

Table of Contents

...