Introduction

The N510 supports TLS for provisioning and phonebooks, the following version is supported:

1. TLSv1.1 (From software 245 or higher)
2. TLSv1.0

There is a provisioning parameter that can be used to change the behavior.

If you would like to use TLS version 1.1 you can:

1. Install the patch
2. Change via auto-provisioning

Patch

1. Download this configuration file.
2. Open the web-interface of the N510 and go to: Settings - Management - Save and Restore.
3. Select this file and press Restore.
4. The N510 will reboot and then TLSv1.1 is enabled. The other settings are not changed.

Auto-provisioning

Add this parameter to your provisioning template.