Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Align
alignright
Image Removed

Valid for:

N610

N670

N870

N870E

Embedded Integrator

Virtual Integrator

Image Removed

Image Removed

Image Removed

Panel
titleBGColor#F0F0F0
titleValid for N610 / N670 / N870 / N870E.

Below you can find some examples how to add/remove DECT handsets via auto provisioning. 

The preferred method is to use the IPUI number of the handsets. The IPUI number can be found on the packaging or in the handset menu: Press: Menu - *#06# on position 1 you can find the IPUI. Scroll down for the 'Without IPUI" method.


Info
titleAttention

N610 in role internal telephony does not support adding handsets via auto-provisioning.


From Software 2.16.2 you can add handsets using 3 different methods.

  1. IPUI
  2. Wildcards
  3. Fixed numbering


Info
iconfalse
titleProvisioning example add handset with IPUI

<?xml version="1.0" encoding="UTF-8"?>

<provisioning version="1.1" productID="e2">

<nvm>

<oper name="add_hs" value="02b6ec8aa5">

<param name="hs.RegStatus" value="ToReg"/>

<!-- From software 2.53 N610/N670 when internal telephony functionality is enabled and add handset via provisioning is needed you need to add the internal number

Example:

<param name="hs.InternalNumber" value="12"/>

-->

</oper>

<!-- This is the preferred method as when the settings are part of the <oper> </oper>, when you change the settings and the handset is already available in the config. All what is in the <oper> </oper> is ignored. So new/updates settings are not used.-->


<param name="hs.02b6ec8aa5.DECT_AC" value="0000"/>
<param name="SipAccount.02b6ec8aa5.AuthName" value="1014"/>
<param name="SipAccount.02b6ec8aa5.AuthPassword" value="123456"/>
<param name="SipAccount.02b6ec8aa5.ProviderId" value="0"/>
<param name="SipAccount.02b6ec8aa5.UserName" value="1014"/>

</nvm>
</provisioning>

Or

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">

<nvm>

<oper name="add_hs" value="02b6ec8aa5">

<param name="hs.RegStatus" value="ToReg"/>
<param name="hs.DECT_AC" value="0000"/>
<param name="SipAccount.AuthName" value="1014"/>
<param name="SipAccount.AuthPassword" value="123456"/>
<param name="SipAccount.ProviderId" value="0"/>
<param name="SipAccount.UserName" value="1014"/>

</oper>

</nvm>
</provisioning>

Info
iconfalse
titleProvisioning example add handset with wildcards

<?xml version="1.0" encoding="UTF-8"?>

<provisioning version="1.1" productID="e2">

<nvm>

<!-- using wildcard handset identifier ( starting with "0_ " , without IPUI ), handset cannot be identified to be assigned to a specific account:
      so all handsets are considered to be equivalent, all handsets need to have the same DECT_AC and DECT registrations must be completed in order.

-->

<oper name="add_hs" value="0_00000">

<param name="hs.RegStatus" value="ToReg"/>
<param name="hs.DECT_AC" value="1111"/>
<param name="SipAccount.Active" value="1"/>
<param name="SipAccount.AuthName" value="1014"/>
<param name="SipAccount.AuthPassword" value="123456"/>
<param name="SipAccount.ProviderId" value="0"/>
<param name="SipAccount.UserName" value="1014"/>

<!-- From software 2.53 N610/N670 when internal telephony functionality is enabled and add handset via provisioning is needed you need to add the internal number

Example:

<param name="hs.InternalNumber" value="12"/>

-->

</oper>


<oper name="add_hs" value="0_00001">

<param name="hs.RegStatus" value="ToReg"/>
<param name="hs.DECT_AC" value="1111"/>
<param name="SipAccount.Active" value="1"/>
<param name="SipAccount.AuthName" value="1015"/>
<param name="SipAccount.AuthPassword" value="123456"/>
<param name="SipAccount.ProviderId" value="0"/>
<param name="SipAccount.UserName" value="1015"/>

</oper>

</nvm>
</provisioning>

Info
iconfalse
titleProvisioning example add handset with fixed numbering

<?xml version="1.0" encoding="UTF-8"?>

<provisioning version="1.1" productID="e2">

<nvm>

<!-- number must be 5 digits 00000 - 00249 -->

<!-- Handset 1 -->

<oper name="add_hs" value="00000">

<param name="hs.RegStatus" value="NotReg"/>

<!-- From software 2.53 N610/N670 when internal telephony functionality is enabled and add handset via provisioning is needed you need to add the internal number

Example:

<param name="hs.InternalNumber" value="12"/>

-->

</oper>

<param name="hs.00000.DECT_AC" value="1111"/>
<param name="SipAccount.00000.Active" value="1"/>
<param name="SipAccount.00000.AuthName" value="1014"/>
<param name="SipAccount.00000.AuthPassword" value="123456"/>
<param name="SipAccount.00000.ProviderId" value="0"/>
<param name="SipAccount.00000.UserName" value="1014"/>

<!-- Handset 2 -->

<oper name="add_hs" value="00001">

<param name="hs.RegStatus" value="NotReg"/>

</oper>

<param name="hs.00001.DECT_AC" value="1111"/>
<param name="SipAccount.00001.Active" value="1"/>
<param name="SipAccount.00001.AuthName" value="1015"/>
<param name="SipAccount.00001.AuthPassword" value="123456"/>
<param name="SipAccount.00001.ProviderId" value="0"/>
<param name="SipAccount.00001.UserName" value="1015"/>

<!-- Handset 3 -->

<oper name="add_hs" value="00002">

<param name="hs.RegStatus" value="NotReg"/>

</oper>

<param name="hs.00002.DECT_AC" value="0000"/>

<param name="SipAccount.00002.Active" value="1"/>
<param name="SipAccount.00002.AuthName" value="1016"/>
<param name="SipAccount.00002.AuthPassword" value="123456"/>
<param name="SipAccount.00002.ProviderId" value="0"/>
<param name="SipAccount.00002.UserName" value="1016"/>

</nvm>
</provisioning>