Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Align
alignright

Valid for:

N610

N670

N870

N870E

Embedded Integrator

Virtual Integrator

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIP address of the device

If the IP address is assigned dynamically via your local network's DHCP server, you can find the current IP address on the DHCP server in the list of registered DHCP clients. The MAC address can be found on the rear of the device. If necessary, contact the network administrator for your local network.

Your DECT manager's IP address may change occasionally depending on the DHCP server settings.

SIP multicast: After every boot, the device will send a SIP multicast which can be seen in wireshark if you are connected to the same network and are in the same vlan.

Panel
titleColor#F85404
titleBGColor#F0F0F0
titleCheck IP Address of DM via connected handset

You can easily check the IP address of a DECT manager, via a Handset that is connected to that DECT manager:

  1. Long-Press green Send-Key to start simulation of line seizure
    ( to get Options Menue for active call ). 
    You do get this Options menue with any active call.
  2. => Options
  3. => Service Info
  4. Sroll for Item 7: which shows the IP Address of the active DECT Manager.

Image Added

In "All-in-one Deployments" deployments, this IP Address of DECT Manager is identical to IP Address of Integrator function and to reach Web-UI.