Versions Compared

Old Version 1

changes.mady.by.user Baremans, Eric

Saved on

compared with

New Version 2

changes.mady.by.user Baremans, Eric

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIntroduction

If you want to know if the network of the customer can be used for LAN synchronization, you can use the N870 to check the network.

The first you need to do is to configure the customer network.

  1. Add VLAN's
  2. Activation of Quality of Service mechanism, LAN synchronization should have higher priority.
  3. Check if the customer switches are not overloaded. Or overloaded at certain time during the day.
  4. The less switches that are used, the better.
  5. Deactivate Enhanced packet processing logics.

Install in the customer network at some strategic points the N870 with some base-stations.

Like in the example below. We installed some N870 base-stations in the customer network, Every base station is connected to one of the customers switches.

Image Added