Page History

Here we describe how to provisioning an Gigaset Maxwell device behind an 3CX PBX.

We have a running 3CX system with configured users .and you have added the provisioning template like described here: FAQ 3CX - Auto-provisioning templates

• Start with factory reset Maxwell device
• Maxwell will boot and after boot send a SIP Multicast

In the 3CX web-interface you can see under Phones the Maxwell:

• Select the Maxwell device
• Click on Assign Ext

Select the extension.

• Press OK
• Phone Provisioning page is opened
• Change the settings
• Press OK
• The Maxwell is configured via auto-provisioning

We have a running 3CX cloud system with configured users.

• Start with factory reset Maxwell device
• In the 3CX web-interface go to: Phones - Add Phone
• Assign the Phone to extension
• Select the extension
  

• Press OK
• Add phone page is opened
• Select the Gigaset device and enter the MAC Address
  
  
• Press OK
• Change the settings
• Select if you are using SBC or STUN
• Copy the Provisioning Link
• Press OK
• Open the web-interface of the Maxwell
• Go to: SETTINGS - System - Provisioning and Configuration
• Copy the provisioning URL into the field Provisioning Server
  
  
• Click on Start Auto Configuration
• The Maxwell is configured via auto-provisioning