Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
N870
Panel
titleColor#F85404
titleBGColor#F0F0F0
titleIntroduction

With releasing the Integrator for Large and Enterprise solutions, we also released the Licenses described below. The license page is only available in the web-interface of the Virtual Integrator and when the N870 has the role Integrator only.

The following Licenses are available.


LicenseOrder number
Virtual Integrator 1

Integrator
Virtual Integrator software License
S30852-H2716-X1

Multicell, up to 100


Single cell, up to 300

Manager
N870N670
N670
Multicell DECT manager License
  • N870 DECT Manager
  • N670 with multi-cell

    S30852-H2716-X2
    Multicell DECT manager License
    S30852-H2716-X2

    N670 DECT
    Manager license
    manager License
    S30852-H2714-X2

    N670 upgrade

    to multi cell license

    This license has no grace period

    S30852-H2714-X1

    License
    S30852-H2714-X1


    N870 base onlyN870 base onlyN670 base only
    N670 base onlyBase
    Up to 60 per N870, no licenseUp to 60 per N670, no licenseNot supported
    Not supported

    1 Gigaset delivers the virtual integrator software, the hardware and VM-ware is not delivered by Gigaset.


    The Integrator is available in 2 versions.

    1. N870 in Integrator only mode
    2. N870 Virtual Integrator software

    The License is based on the N870 hardware MAC address.

    How to

    add

    order a

    License

    license.

    1. Define the Master DECT Manager (Only when using the N870 Virtual Integrator software)
    2. Download the “License Request File” from the N870 License page

    3. For our Resellers: Send the “LRF”, the “License Order-Number” and the “Quantity” of required licenses to your distributor
    4. For our Distributors: Send the “LRF”, the “License Order-Number” and the “Quantity” of required licenses to GC Order Management ORDERS-PRO@gigaset.com
    5. The “License Activation File”, received back from GC-OM must be uploaded on the N870 License page to activate the requested licenses.

      Note: Only when using the N870 Virtual Integrator software a Master DECT Manager must be defined first!
      Image RemovedInstall the Virtual Integrator with at least one DECT manager and set this as Master DM
      When using the N870 as integrator only, an integrator license is not needed. Go to step 2.
    6. Download the license request file from the Integrator web-interface
    7. Create your order that contains:
      License request file + Virtual Integrator software License + Number of Multicell DECT managers + Number of Single cell DECT managers ( + number of N670 upgrade licenses)

    How to order additional licenses.

    1. Download the license request file from the Integrator web-interface
    2. Create your order that contains:
      License request file + Number of extra Multicell DECT managers + Number of extra Single cell DECT managers ( + number of extra N670 upgrade licenses)


    Grace period meaning and consequences

    The N870 has a grace period build in.

    • An installation can be tested for 35 days without any limitation and any purchased license

    a. After first startup

    b. After each full factory reset

    • After 35 days the message "Check License status“ will be shown on all installed DECT handset, for additional 35 days (day 36 – 70 after first startup/factory reset)
    • Also a license error message will be shown in the N870 web-interface.
    • But, the system will stay fully functional.
    • After a total number of 70 days after first startup/factory reset the number of parallel calls will be reduced to 1 call per connected DECT manager, unless a valid license file will be uploaded into the N870


    Service

    .

    If the license is not valid anymore due to:

    • Master DECT manager is broken and is replaced, therefore the license is not valid anymore.

    You will have 1 Month to request a new License file, see the grace period.


    Info

    Today, the license file procedure is a manual procedure. The online process is under development.

    Panel
    titleColor#F85404
    titleBGColor#F0F0F0
    titleMaster DECT manager
    Section
    Image Removed

    Only needed when the Virtual Integrator is used.

    As the license is based on the N870 MAC address and the Virtual Integrator is not an N870 device, you need to define the Master DECT manager.

    In the Integrator web-interface go to SETTINGS - DECT manager - Administration - Global settings

    Select the Master DECT Manager.

    Info

    The Master DECT manager need to be installed, connected and working as the real MAC address of this device is retrieved.

    Panel
    titleColor#F85404
    titleBGColor#F0F0F0
    titleDownload the License file

    To request a new License, you first need to download the request file from the device. Image Removed

    The request file contains basic information about the system like:

    • Hardware information (MAC address of Master DECT manager)
    • Software version
    • Number of connected DECT managers / Base stations / handsets
    • Enabled licenses
    • Country selection
    • Data and time
    • Provider / profile name

    The file content is encrypted.

    In the Integrator web-interface go to SETTINGS - System - Licensing - Create Request File

    The License request file is downloaded.

    (Screenshot is from an N870 switched to Integrator only mode)

    Panel
    titleColor#F85404
    titleBGColor#F0F0F0
    titleBuy a License using the license file

    To request a new license you need to add this file to your purchase order.

    You will receive from Gigaset a License file.

    Panel
    titleColor#F85404
    titleBGColor#F0F0F0
    titleUpload the new License

    In the Integrator web-interface go to SETTINGS - System - Licensing - Licence - Browse Image Removed

    Select the License file you received from Gigaset.

    Click Upload

    Your license is now enabled.

    Image Removed