Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Section
Column
width70%80%

Release Date:

Beta Release

  • December 2019


Info
titleDistinctive ring

When you upgrade your system to this software, the new feature distinctive ring will be enabled. Your existing DECT handsets will have the old menu structure where only Internal and external ringtones can be selected. To get the new DECT handset menu structure you need Re-Register the DECT handsets, there is no need to DE-register the handset first. How this must be done you can read on the distinctive ring page.

Or you can disable the distinctive ring functionality.

What is new?

Improvements

  • Caller-Id not updated after call transfer at OpenScape Business
  • EIN2-7149 giga-ip-bs freeze fix during uaCSTA incoming call
  • [EIN2-6953] Create feature switch for Distinctive ringing
  • [OS-1102] Fix for CNIP with cyrillic characters not displayed on DECT phone
  • [EIN2-7132] HTTPS for Rap - fixes for nested absolute links
  • EIN2-7222 uaCSTA behind Mondago, SnapshotDeviceResponse answer is wrong
  • EIN2-7149 [3CX] device reboots when using uaCSTA and 2e incoming call RESOLVED
    EIN2-7142 uaCSTA when switch protocol then reboot is needed. RESOLVED
    EIN2-7139 CSTA session already active CLOSED
    EIN2-7132 XHTML add support for absolute HTTPS links RESOLVED
    EIN2-6863 N870 get handset information via HTTP(s) get RESOLVED
    EIN2-6843 [webui] CSTA transport protocol dropbox
  • EIN2-6614 Service dash board RESOLVED
    EIN2-6134 N870/N670 Add capacity information to http (GET) user-agent header RESOLVED
    EIN2-6125 Virtual Integrator license RESOLVED
    EIN2-5710 Web UI: Configure SIP registration behaviour

    Supported Languages: German / English / Spanish / French / Italian / Russian / Turkish / Netherlands / Portuguese

  • Save of Central phone-book is now possible

  • Distinctive ringing for internal, external, door station, group, emergency or user defined call types
  • Add capacity information to http (GET) user-agent header
  • Large and XXL systems are now released
  • N870 in Integrator mode only:
    • Up to 4 DECT Managers (With license)
    • Up to 800 DECT handsets
  • N870 Virtual Integrator is released
    • Up to 100 DECT Managers (With license)
    • Up to 20000 DECT handsets
  • DECT GAP handsets protection can be disabled
  • Improved DECT handset registration, up to 10 registrations in parallel can be done.
  • NAPTR

Improvements

  • CSTA
    • CSTA session already active
    • CSTA transport protocol can be changed via the web-interface
    • SnapshotDeviceResponse answer is wrong
    • Switch the transport protocol without an reboot
    • Device reboots when using uaCSTA and receiving 2e incoming call
  • CNIP not updated on Transferee after transfer
  • Central phone-book
    • Can be downloaded via the web-interface
    • INT key can be assigned to Central phone-book
    • After provisioning phone-book is automatically downloaded
  • Web-interface:
    • Show Licensing page when used as Integrator only
    • Configure SIP registration behavior if mobile device is not connected/reachable
  • EIN2-7315 [BT][N870][V2.23.0.rc4] - device doesn't perform failover to secondary SBC (sip proxy)
  • EIN2-7214 [ACC] Cannot set Central Phonebook as Directory for INT key
  • EIN2-7138 [3CX] After first provisioning, the central phonebook is not downloaded.
  • EIN2-752 Distinctive ringing for internal, external, doorstation, group or user defined call types ... and emergency (from alarm server))
  • EIN2-7274 Add Spanish Language to Webui
  • EIN2-7140 [N670/N870] CNIP not updated on Transferee after transfer
  • EIN2-6788 N870 provisioning failed message but can't find why
  • EIN2-6752 Caller-Id not updated after call transfer at OpenScape Business
  • Fix for CNIP with Cyrillic characters not displayed on DECT phone
  • HTTPS for Rap - fixes for nested absolute links
  • Get handset information via HTTP(s) get
  • Fail-over to secondary SBC (sip proxy)
  • Register request with Authorization Digest: QOP = "auth-int" or "auth-init"
  • EIN2-6617 [NL - TS - Businesscom] N870 Central Phonebook: Please add download button
  • EIN2-5572 [2.10 rc4 Starface] When XHTML is used, incoming
  • Display handset during call transfer is very slow 
  • xHTML:
    • Incoming invite with auto-answer is not possible
    EIN2-5901 Syslog add
    • Service doesn't work when credentials are empty
    • "&" Sign gives error message
  • Syslog
    • Add information if setting is changed
    • Add LDAP information
  • No CLIP update
  • LDAP detail view doesn't work on some entries
  • Auto-provisioning
    • Parameter "Provisioning.global.Period" should work without restart
    • Default ringtone can be changed via provisioning
    • Provisioning started via web-interface showed failed message but worked fine
  • Maximum length of REFER-TO header increased
  • Access code From incoming calls and from network together with Area code is not working
  • DTMF: No CRLF after the "Duration" line

Known Issues

  • Adding area code for network directories dialed numbers is not working. A patch N870-V2.26.1 is available.

For testing upgrade, a fake software image can be downloaded here.

Image Removed

Image Removed
Column
width30%
20%
Info
iconfalse
titleN870/N670 software (V2.26.0 build fafc63f)

Image Added

Image Added

Info
titleFirmware update fails

If the firmware update fails, it can be caused by that you are using a very old firmware. Just start the firmware update a second time.

Info
iconfalse
titleVirtual Integrator V2.26.0

Download zip file

Download ova file

Download update