FAQ Nx70 - N-Way conference (Hidden)

Introduction (supported from firmware 2.52.0 and higher)

With this newly added feature, the Nx70 can setup a conference using the N-way feature of Broadworks.

It offers the possibility to initiate large conferences on the Broadworks platform, straight from a Gigaset professional handset.

For conferencing using the Nx70 , there are 3 options:

1. Local, Nx70 is conference host.

As this feature is available since the introduction of the Nx70, please refer to the manual for more details on usage.
When using the local conference feature, N-way cannot be started. If you need to start a conference with more than 3 participants, please use option 2 or 3.

2. Start a conference, Broadworks is the conference host.

You can find the "how to use" instructions below

3. Initiate a conference while on call, Broadworks is the conference host.

You can find the "how to use" instructions below

2. Start a conference, Broadworks is the conference host

Step 1	Step 2	Step 3	Step 4
Start - Idle screen	Go to XSI phonebook list and select "Conference" Press "OK"	A call is setup towards the N-way conference box	Connected to the N-way conference box. To add a participant press "Ext. Call" key

Step 5	Step 6	Step 7	Step 8
Enter the number of the participant or use the phone book to select a participant.	To add the participant to the conference, press the "N-Conf" key	When the participant is successfully added, this display is shown.	To add more participants repeat the procedure starting at Step 4