You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

You can select one of the three operating modes Basic Mode, Alarm Mode or PNG Mode in this menu:

  • Basic Mode (Call based): All sensory alarms are available: Three alarm destinations for sensory alarms can be configured in the same way as for the emergency call. Operation is possible with or without an alarm server.
  • Alarm Mode: All sensory alarms forwarded to an alarm server (via the  AML API) are available.
  • PNG Mode: All sensory alarms forwarded to an alarm server (via the  AML API) in compliance with BGR 139 are available.

This selection may only be performed by appropriately trained service personnel.

The service PIN must be entered in order to change the operating mode.

It is not possible to change the operating mode while one of the operating modes is active, see Section 3.1.1, "[Mode] Activation".

For more information on operating modes please refer to Chapter 2, "Operating modes".

  • No labels