You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Specify here how the selected operating mode (see Section 3.1.3, "Operating mode") is to be activated (applies for all device types).

If only Automatic is activated, the selected operating mode is activated automatically when the handset is removed from the charger and deactivated when the handset is replaced in the charger.

If Manual is deactivated, the selected operating mode cannot be activated or deactivated manually. Both options can be activated.

Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Alarm Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select one of the three operating modes.
  5. Select [Mode] Activation.


ParameterBasic modeAlarm modePNG modeDescription
AutomaticOffOffOff

If enabled:

Handset out of charger:

Basic mode: Monitoring is started, sensor test is no required.

Alarm/PNG mode: Logon procedure to the server is send.

Handset in charger:

Basic mode: Monitoring is disabled

Alarm/PNG mode: Logoff procedure to the server is send.

ManualOnOnOn

If enabled: User can manually logon/logoff

If disabled: Manual logon/logoff is not possible

Pause in chargerOffOffOff

If enabled:

Handset in charger: 

Basic mode: Monitoring is paused.

Alarm/PNG mode: Server is informed that handset is in charger. Monitoring is disabled.

Handset out of charger:

Basic mode: Monitoring is started.

Alarm/PNG mode: Server is informed that handset is out of charger. Monitoring is started.

If disabled:

Handset in/out of charger has no influence on the monitoring mode.


Alarm and PNG mode: Pause in charger enabled

  • No labels