You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Current »

The service PIN is required for accessing the Alarm Configuration and Operating Mode menus.


Make sure to change the default value "00000" to an individual PIN before handing over handsets.


Procedure:

  1. Select the Additional Features icon in the main menu.
  2. Select Alarm Configuration.
  3. Enter the five-position service PIN and confirm with OK.
  4. Select Service PIN.
  5. Enter an individual five-position PIN, repeat the input and confirm with OK.


Make sure to note down the newly set PIN. If you forget the PIN, it can only be reset by your service partner for a fee by resetting the handset.


Special procedure to reset an Alarm

When the Handset is in an Alarm state and due to any reason the Alarm is/can not be cancelled, via entering the Service PIN on the handset, it will switch to IDLE mode and will not be monitored anymore.

Just enter the PIN, there is no information on the display !!!

  • No labels