You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

This article will describe the configuration of the HT-702/704 behind the Gigaset T300/500 PBX system.

To guarantee a proper operation, please update the device first to the latest sw-version.

The automatic (one-touch) setup is supported with this device (PBX version 5.3.x.x or higher).

 

 

 

 

 

This is the description for the manual setup. For the automatic setup please scroll down.

In order to use a Grandstream VoIP ATA to connect a fax machine or analogue telephone to the T300/T500 PBX you have to take the following steps:


  1. Connect the ATA Adapter to your network and connect the powercable. To get the IP address of the HT701 connect an analog phone to the line connector of the box and dial ***. The voice menu asks you to choose the wanted menu. Dial 02. The voice system will tell you the current IP address of the box.

  2. Open your webbrowser and type in the address, e. g. 192.168.2.24. The default password of the box is admin.

  3. The basic and advanced settings can be kept by default.

  4. The FXS Port Menu has to be configured as shown.

 

In our example the T500 PBX uses 192.168.2.50 as IP address. The SIP name configured in the PBX is GrandHT701, we use a random password.

In our example the T500 PBX uses 192.168.2.50 as IP address. The SIP name configured in the PBX is GrandHT701, we use a random password.

Release Notes 3.0

 

 

 

 

 

 

  • No labels