You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

This article will describe the configuration of the HandyTone 702/704 behind the Gigaset T300/500 PBX system.

To guarantee a proper operation, please update the device first to the latest sw-version (V1.0.4.8, 05.02.2013).

The automatic (one-touch) setup is supported with the HT702 and HT704(PBX version 5.3.x.x or higher). The HT701 must be configured manually. The manual steps show the HT701.

 

 

 

 

 

This is the description for the manual setup. For the automatic setup please scroll down.

In order to use a Grandstream VoIP ATA to connect a fax machine or analogue telephone to the T300/T500 PBX you have to take the following steps:


  1. Connect the ATA Adapter to your network and connect the powercable. To get the IP address of the HT701 connect an analog phone to the line connector of the box and dial ***. The voice menu asks you to choose the wanted menu. Dial 02. The voice system will tell you the current IP address of the box.

  2. Open your webbrowser and type in the address, e. g. 192.168.2.24. The default password of the box is admin.

  3. The basic and advanced settings can be kept by default.

  4. The FXS Port Menu has to be configured as shown.

In our example the T500 PBX uses 192.168.2.50 as IP address. The SIP name configured in the PBX is GrandHT701, we use a random password.

We advice to check the codec settings at the bottom of the FXS port menu.
We strongly advice only to use the G.711 alaw/ulaw codec for use with connected fax machines.

 

  Additional Information:

  External Link

  ATTENTION:  No further support for this device from Gigaset!!!

 

 

 

 

 

  • No labels