Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 18 Current »


On this page we would like to explain you what you can do in case you find issues within your Gigaset N870 multicell solution.

Our experience is that most issues are related to the Installation of the system, therefore the list below first focus on the installation part and then how to collect the information.


All N870 multicell devices should be on the same software version.


Check if the Base Stations are mounted correct, like not installed direct against metal walls.


DECT synchronisation: The DECT measurement is done using the Gigaset Site Planning Kit. Please check if the customer situation has not been changed and these changes have influence on the DECT coverage.

With the visualisation tool, you can get an indication of the DECT synchronisation chains and the connection quality. (Red lines are not allowed)

4LAN synchronisation: If LAN synchronisation is used, the LAN network should support the documented requirements. It does not mean that DECT measurement is not needed, the base stations must be able to see each other via DECT.
5Check the Base station events, download the information and store it on your laptop.
6Check the Incidents page, download the information and store it on your laptop.
7Do the handsets have the latest firmware, connect them to a PC and update them with quicksync.
8Can you reproduce the error? -> Reproducibility ratio “Always” (9/10,10/10) “Often” (>2/10 <9/10) “Sometimes” (1/10,2/10)
9If there error is related to the network / VoIP protocol, wireshark traces are needed.
10Collect syslog output.
11Read on the handset the code for the last 4 reboots in case there is an reboot issue.
12Save configuration
13Collect all the info about the problem, and if possible how to reproduce it.

Contact the Gigaset Support team and provide all the above information.

  • Software version of the system.
  • Pictures of Base stations how they are mounted.
  • DECT Measurement report.
  • Picture of the visualisation tool.
  • Export of Base stations events.
  • Incidents download.
  • Handsets used and software version.
  • Wireshark traces if required.
  • Syslog output if required.
  • Handset reboot codes if required.
  • Saved configuration
  • Detailed problem description.
15Based on the found error, our support desk could advise you to update the system to a newer software version, . On this page you can find an overview about the released software versions.

Please add the above information to the Ticket. The more information we have, the quicker we can help you.

  • No labels