Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »


This page describes how to start the DECT registration window via auto-provisioning. 


update_dmProcedure updating existing Dect Manager entry. Attribute of XML Oper, value is required as a parameter of updateDectManager operation.
Where value is treated as Identifier of the Dect Manager. (Name)
RegStartRegistration start time: must be typed as UNIX timestamp.
RegDurationTime period in seconds.
DMPpasswdDECT Manager Password


Start time 31-May-2018 14:59

Duration 300 seconds.

Password DECT manager: Gigaset

<oper name="update_dm" value="local" >

<param name="RegStart" value="1527771540" />
<param name="RegDuration" value="300" />


If the start-time time is in the past and the end-time (Start time + Duration) is not passed then the registration window is still open.


Please add this code to the end of the Provisioning template, else you will get error message that provisioning failed.

<oper name="update_dm" value="local" >

<!-- If RegStart value = 1 then Registration starts now. You do not need to calculate the UNIX time stamp -->

<param name="RegStart" value="1" />
<param name="RegDuration" value="300" />


<oper name="update_dm" value="local" >

<!-- Below an example how to configure the firmware update URL -->

<param name="FwUpdateUrl" value="" />

<param name="FwUpdateStart" value="Epoch time" />

<!-- Value for this parameter is Epoch time so i.e. 2019-01-18 15:27:00 is 1547821560. It's for local time not GMT. -->


  • No labels