Page tree
Skip to end of metadata
Go to start of metadata

Release Date:

  • September 2020

What is new?

Improvements

  • Auto-provisioning
  • Update PJSIP library to version 2.10
  • CLI-config: system applications / services should consume DHCP options only if requested
  • XML number filter visible in web-interface by default
  • uaCSTA normalClearing not send when other side disconnects call
  • Enable hiding passwords for SIP all Accounts
  • Feature key synchronization can also be used by non Broadsoft platforms
  • No name displayed when number is anonymous
  • Turn LED signalling on/off via the web-interface
  • Add popup to reboot system after importing DECT handsets
  • Make syslog easily configurable
  • Web UI - Licensing - Activation period status message
  • Dm ID can be set via provisioning

Bugfixes

  • PJSIP stops sending REGISTER by TCP after reboot of PBX
  • sip-control terminated.
  • Switch from UDP to TCP and back then no SIP registration anymore
  • Network name replacement does not work in Jumbo mode
  • Lack of syslog info about mobile device import fail
  • LDAP stops working
  • Reset of VI with keep IP option resets to dynamic IP instead
  • No information about anonymous call is displayed in jumbo mode
  • SIP re-register stops when platform is unavailable "Not enough memory" message is seen
  • Graphical tool does not show signal info to base station with equal or higher sync level
  • Capacity of DM's is not summarized correctly by web-ui
  • No LAN synchronization possible for medium deployment if DM is LAN Master
  • [Online directories][XML] Escaped characters and numeric character entities are not recognized

Known Issues

  • Broadsoft, open missed call list, click on view, name is not correct/missing

  • If the base-stations are not updated, a restart of the DECT manager could be needed
  • Virtual integrator, change password for all DECT managers could show error message but passwords are updated


For testing upgrade, a fake software image can be downloaded here.

N870/N670 software (V2.36.0 build 732061a)

Firmware update fails

If the firmware update fails, it can be caused by that you are using a very old firmware. Just start the firmware update a second time.



  • No labels