Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Robin Compact SIP Door intercom

Tested with: Gigaset T300/T500 PRO: Software version 4.6.5.0

Robin Compact SIP: Software version 2.0.1, Software build 1307, Build type Release

Create SIP account in Gigaset T300/T500

Goto: Configuration - Phones - Add additional Telephones

Robinsipaccount.jpg

Use the settings like in the example above.

Open the Robin Compact SIP door intercom web-interface

 Robinbasicteleph.jpg

Enter the SIP username and password as defined in the Gigaset T300/T500.

The SIP domain and proxy is the IP address op the Gigaset T300/T500.

RobinSIPacc.jpg

Robindatetime.jpg

 

Time server: Enter the IP address of the Gigaset T300/T500

Robindatejpg.jpg

RobinPhonebook.jpg

 

Here you can enter the number to be dialled when the door intercom key is pressed. In this example the number 130 is called.

Robinnumber.jpg

Robinbasicteleph.jpg

 

Here you can define which Phone book entry is used when the key is pressed.

Robinphboentry.jpg

Robinadvteleph.jpg

 

Please check if the correct codecs are enabled.

Robincodec.jpg

Door opener activation.

 

To open the door, the following default codes are tested with the Gigaset T300/T500

Robindooropener.jpg

Gigaset User account.

Without a Gigaset user account, the door intercom can be used to dial an internal number. Incoming and Outgoing calls are not possible.

Incoming calls to the door intercom are only possible when the door intercom is assigned to a user.

In the Gigaset T300/T500 Goto: Configuration - Users and create a new user, only to be used for the door intercom (user license)

Robinuser.jpg

 

Homepage-robin.png

 

 

  • No labels