You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 27 Next »

Introduction

Application servers can communicate with the Nx70 via the MQTT protocol.

This interface can be configured via the:

  • Web-interface
  • Auto-provisioning


Web-interface

In the Nx70 web-interface go to: SETTINGS - Online services - Application servers

If this page is not visible, use the provisioning file below to enable this page.

You need to create the provisioning file below and start provisioning (Can be done via the web-interface)

Enable MQTT web-page via provisioning

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">

<nvm>

<oper name="set_webui_visibility">

<param name="menu.settings/online-services/application-servers" value="visible" />

</oper>

</nvm>
</provisioning>


After the provisioning, the Application Servers page is now visible.

FAQ Nx70 - Application servers


Create an Account for an Application server

You now can create an application server access.

  • Id: id for external clients are: "as1", "as2" ...
  • Application server name (username) (At least one character is needed)
  • Password (has to be at least 32 characters using hexadecimal digits only: 0 1 2 3 4 5 6 7 8 9 a b c d e f A B C D E F)

FAQ Nx70 - Application servers


Create an account via auto-provisioning

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">

<nvm>

<oper name="set_external_client">

<param name="Username" value="as1" />
<param name="Password" value="123456789012345678901234567890ab" />

</oper>

</nvm>
</provisioning>

  • No labels