You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 30 Next »

Valid for N610 / N670 / N870 / N870E. Software 2.52 or higher is needed.

With this newly added feature, you can setup a conference using the N-way feature of Broadworks.

It offers the possibility to initiate large conferences on the Broadworks platform, straight from a Gigaset professional handset.


For conferencing using the N610/N670/N870/N870E IP PRO , there are 3 options:

1.Local, Nx70 is conference host.As this feature is available since the introduction, please refer to the manual for more details on usage.
When using the local conference feature, N-way cannot be started. If you need to start a conference with more than 3 participants, please use option 2 or 3.
2.Start a conference, Broadworks is the conference host.Starting a N-Way conference from an idle handset.
You can find the "how to use" instructions below.
3.Initiate a conference while on call, Broadworks is the conference host.Starting a N-way conference while there is an active call.
You can find the "how to use" instructions below.


Enable N-way.

You can find the "how to enable" instructions below.


2. Start a conference, Broadworks is the conference host

Step 1

Step 2

Step 3

Step 4

Start - Idle screen

Go to XSI phonebook list
and select "Conference"
Press "OK"

A call is setup towards the
N-way conference box		Connected to the N-way
conference box.
To add a participant press
"Ext. Call" key

Step 5Step 6Step 7Step 8
Enter the number of the
participant or use the
phone book to select a
participant.		To add the participant to
the conference, press the
"N-Conf" key		When the participant is
successfully added, this 
display is shown.		N-way conference started.
To add more participants
repeat the procedure
starting at Step 4


End Conference
When the initiator ends
the call to the N-Way
Conference box, the
conference is ended. All
participants will be
disconnected.
Press red disconnect key

3. Initiate a conference while on call, Broadworks is the conference host

Step 1

Step 2Step 3Step 4
Handset is on call and you
want to start a conference
using N-way
Press the Ext. Call key		To start connecting to
N-Way conference box
Press the Phone book key		Select:
Online Directory
Press OK key		Select:
Conference
Press OK key

Step 5Step 6Step 7Step 8
Dialling to N-Way
Conference box		Connection to
N-Way box success
Press N-Conf key
to start the conference		N-Way conference
setup success		N-way conference started.
To add more participants
repeat the procedure
starting at Step 4 of option
2.

End Conference
When the initiator ends
the call to the N-Way
Conference box, the
conference is ended. All
participants will be
disconnected.
Press red disconnect key

4. Auto-provisioning

The N-way function can only be enabled via auto provisioning.
These two parameters can be added to the provisioning template/file on Broadworks or can be uploaded as a file via the WebGui.
For more information about uploading a provisioning file via the WebGui, click here.


Parameter
SipProvider.0.ServerConferenceMode
  • 0: off (default)
  • 1: Broadsoft
SipProvider.0.ServerConferenceURIconference@<yourDomain>

Example:

<?xml version="1.0" encoding="UTF-8"?>
<provisioning version="1.1" productID="e2">

<nvm>

    <param name="SipProvider.0.ServerConferenceMode" value="1"/>

    <param name="SipProvider.0.ServerConferenceURI" value=" "/>

</nvm>
</provisioning>



Download the XML file via button below.
Note: you have to enter your Conference URI in the XML file before uploading it into the system.

  • No labels