Page tree
Skip to end of metadata
Go to start of metadata

Software upgrade until version 5.3

Updating the Software of the T300/T500 can only be done online.

Go to: Configuration -> Server - > State

 

Newer versions to update your software will be listed with:

 

Prior to the actual update process a backup of the system will be performed. In case of a failure during the update the current state of the system will be recovered without loss of data.

Update notification:
If this setting is enabled, the system will perform a weekly check for a new software version. In case an update is available, the administrator will receive an automated e-mail containing the details of the new version.

More information can be found here:

 

Software upgrade from version 5.3 to 5.7 or higher. (Paid upgrade)

The new T300/T500 software 5.7 or higher is based on a new 64 bit kernel. Due to this, the normal online upgrade is not possible, the upgrade has to be done using an USB stick that can be ordered at Gigaset.

The complete installation procedure is described here.

 

Software upgrade from 5.7 to higher version.

Updating the Software of the T300/T500 can only be done online.

Go to: Configuration -> Server - > State

 

Newer versions to update your software will be listed with:

 

Prior to the actual update process a backup of the system will be performed. In case of a failure during the update the current state of the system will be recovered without loss of data.

Update notification:
If this setting is enabled, the system will perform a weekly check for a new software version. In case an update is available, the administrator will receive an automated e-mail containing the details of the new version.

  • No labels