Base stations

The Integrator/DECT manager automatically recognizes the base stations within the network. Base stations need to be confirmed, activated and synchronized.

Base station administration

Use the following web configurator page to assign base stations to the DECT manager.

→ Settings → Base stations → Administration

There are two tables:

Connected base stations lists all base stations which are already connected to the DECT manager.
Pending base stations list all base stations which are not yet connected to a DECT manager.

Connected base stations
The page shows the connected base stations with the following information:
MAC address	Hardware address of the base station. With this address the device is uniquely identified within the LAN.
Base station	Name of the base station. When added to the list the MAC address is used as name. The base station located at the same device as the DECT manager is shown as Local. The name can be edited
RPN	(Radio Fixed Part Number) This number separates the cells in which the base station could reside from each other (maximum 7 cells). It indicates for a mobile device how many intercell hand overs the base station is able to manage.
DECT manager	Name of DECT manager the base station belongs to. Currently always: local
FW	Firmware version currently installed.
Status	Synchronization status of the base station:
	0	Offline	Not available
	1	Deactivated	Available but not activated
	2	No Sync	Activated but not synchronized
	3	Sync	Activated and synchronized
	4	Sync Overload	Synchronized but DECT overload

Page tree

FAQ N870 - Basestations

Base stations

Base station administration