You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Fonzer

About Fonzer

FONZER IS DE EERSTE TELEFOONCENTRALE DIE ECHT GEBOREN IS IN DE CLOUD

Fonzer maakt bellen beschikbaar op elk toestel, altijd en overal.

Fonzer is perfect voor organisaties die een innovatieve telefonie-oplossing zoeken of die eenvoudigweg komaf willen maken met de kosten en verantwoordelijkheden die verbonden zijn aan de klassieke telefooncentrales.
Fonzer biedt véél meer flexibiliteit dan de traditionele telefooncentrales en is snel, simpel en betaalbaar voor elke organisatie.

Met Fonzer behoort een vaste, dure en complexe telefooncentrale tot de geschiedenis.

See below for a list with supported features when using the Gigaset PRO IP Devices on the providers network.

 

 

Feature                                       Maxwell 10Maxwell 3Maxwell basicN720 IP PRON510 IP PRO
Software release:  2.5.33.12.16.62.16.689243
Basic CallYesYesYesYesYes
Calling line (CLIP)YesYesYesYesYes
Connected line (COLP)-1-1-1-1-1
Anonymous call*-2-2-2-2-2
Do Not DisturbYesYesYes--
Message waitingYesYesYesYesYes
Call list/historyYesYesYesYesYes
Voice mail deposit/retrieval-1-1-1-1-1
Call waitingYesYesYesYesYes
Call Hold / ToggleYesYesYesYesYes
Call forward (CFU)*-2-2-2-2-2
Call forward (CFNR)*-2-2-2-2-2
Call forward (CFB)*-2-2-2-2-2
Call Transfer attendedYesYesYesYesYes
Call Transfer early attendedYesYesYesYesYes
Call Transfer unattendedYesYesYes--
Call completed elsewhereYesYesYesYesYes
DTMF (RFC2833)YesYesYesYesYes
Conference 3ptyYesYesYes-Yes
BLF Busy / Idle indicationYesYesYes--
Call pick-up direct*YesYesYesYesYes
Call pick-up group*YesYesYesYesYes
Call pick-up BLFYesYesYes--
Auto provisioningYesYesYesYesYes
SIP Security     
SIPS YesYes--
SIP via TLS YesYes--
SRTP YesYes--
- Not supported by device
-1Not supported by the platform
-2Platform feature via FAC
3Via key extention module

Feature codes

 The following feature codes are supported by the platform.

code
feature
*31* numberAnonymous call to this number
*32* numberToggle Code: Enables/Disabled anonymous call for the next call On or Off (Announcement)
*32Toggle Code: Enables/Disable anonymous call for all calls On/Off (Announcement)
#32Toggle Code: Enables/Disable anonymous call for all calls On/Off (Announcement)
  
*35Toggle Code: Hotdesking to login/out on a device
*35*[int]Toggle Code: Hotdesking to login/out on a device
*35*[int]*[pin]Toggle Code: Hotdesking to login/out on a device
  
*100 / #100Toggle Code: Login/off in waiting queue, dependent on your previous state.
*101 / #101Login/off in all waiting queues.
*102 / #102Change Waiting queue status for all queues to "break"
*103 / #103Logoff from all waiting queues.
  
1233Voicemail box of user
  
*8Pick up first ringing
*8[extension number]Directed pickup of [Extension]
*8[group number]Group pickup
*96 / #96Voicemail box of user
  
*[xx]Toggle Code: To activate/deactivate the dial plan with number xx
  
1233 [vmbox-nr]Listen to voicemail messages of voicemail box number [vmbox-nr]
*96 [vmbox-nr]Listen to voicemail messages of voicemail box number [vmbox-nr]
#96 [vmbox-nr]Listen to voicemail messages of voicemail box number [vmbox-nr]

Auto provisioning

The Gigaset N510, N720 and Maxwell 10, Maxwell 3 and Maxwell basic are released behind the Fonzer platform including auto provisioning.

Go to Devices and click +Add and choose Gigaset pro:

Select the desired certified Gigaset pro product:

Enable auto-provisioning by clicking on No switch to change to Yes:

Enter the device MAC address and ID:

To finalize, click on next at the top.

When all steps are taken, like adding users and so on, the device will now automatically be added to the Gigaset pro redirect server.
Connect or restart the device and the device will auto-provisioned. 

Documentation and Information

Find here the Fonzer FAQ.

  • No labels