Page tree
Skip to end of metadata
Go to start of metadata

Introduction

Broadsoft supports the following phone books:

  1. Personal
  2. Group
  3. Group Common
  4. Enterprise
  5. Enterprise Common

Info: Phone book lookup for incoming/outgoing calls is available from software 2.20.5 or higher.




Maxwell 2 and 3Maxwell Basic





Configuration

You can enable / disable the Broadsoft phone books and give them an different name to match your customer requirements.

The Broadsoft phone books can only be used if the XSI service is configured and working.








Auto provisioning

This functionality is mostly enabled via Broadsoft auto provisioning, see below for the provisioning parameters.

ParameterDescription
Telephony.PhoneSystem.XSI.PersonalDirectory.Enabled0 = Disabled 1 = Enabled
Telephony.PhoneSystem.XSI.PersonalDirectory.NameName of the personal Directory
Telephony.PhoneSystem.XSI.GroupDirectory.Enabled0 = Disabled 1 = Enabled
Telephony.PhoneSystem.XSI.GroupDirectory.NameName of the Group Directory
Telephony.PhoneSystem.XSI.GroupCommonDirectory.Enabled0 = Disabled 1 = Enabled
Telephony.PhoneSystem.XSI.GroupCommonDirectory.NameName of the Group Common Directory
Telephony.PhoneSystem.XSI.EnterpriseDirectory.Enabled0 = Disabled 1 = Enabled
Telephony.PhoneSystem.XSI.EnterpriseDirectory.NameName of the Enterprise Directory
Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.Enabled0 = Disabled 1 = Enabled
Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.NameName of the Enterprise Common Directory
Telephony.PhoneSystem.Broadsoft.Lookup.Incoming0 = Disabled 1 = Enabled
Telephony.PhoneSystem.Broadsoft.Lookup.Outgoing0 = Disabled 1 = Enabled

Example:

<param name="Telephony.PhoneSystem.XSI.PersonalDirectory.Enabled" value="1"/>
<param name="Telephony.PhoneSystem.XSI.PersonalDirectory.Name" value="Personal book"/>
<param name="Telephony.PhoneSystem.XSI.GroupDirectory.Enabled" value="1"/>
<param name="Telephony.PhoneSystem.XSI.GroupDirectory.Name" value="Group book"/>
<param name="Telephony.PhoneSystem.XSI.GroupCommonDirectory.Enabled" value="1"/>
<param name="Telephony.PhoneSystem.XSI.GroupCommonDirectory.Name" value="Group Common book"/>
<param name="Telephony.PhoneSystem.XSI.EnterpriseDirectory.Enabled" value="1"/>
<param name="Telephony.PhoneSystem.XSI.EnterpriseDirectory.Name" value="Enterprise book"/>
<param name="Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.Enabled" value="1"/>
<param name="Telephony.PhoneSystem.XSI.EnterpriseCommonDirectory.Name" value="Enterprise Common Book"/>

<param name="Telephony.PhoneSystem.Broadsoft.Lookup.Incoming" value="1"/>
<param name="Telephony.PhoneSystem.Broadsoft.Lookup.Outgoing" value="1"/>



User Interface

The user can via short-press phonebook key ↓, be directed to one phonebook, configured by the administrator or via long-press get the complete list of available phonebooks.

Which phone-books are listed, is dependent on the settings.

  • No labels