Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

PortaDial doorintercom


Tested with: Gigaset T300/T500 PRO: Software version 4.6.5.0
PortaDial type 1 with 1 pushbutton
PortaDial Interface 3 SIP


 User-added imageUser-added image


1. Create SIP account in Gigaset T300/T500

Go to: Configuration - Phones - Add additional Telephones

User-added image

Use the settings like in the example above. Use the Password generator to create a secure Password


2. Open the Fasttel Wizard Elite door intercom web-interface

Go to Advanced Settings 1

SIP Server:  IP address of the Gigaset T300/T500  
Outbound Server:  IP address of the Gigaset T300/T500  
SIP User ID:  Telephone name defined in Gigaset T300/T500  
Authenticate ID:  Telephone name defined in Gigaset T300/T500  
Authenticate Password:  Password defined in Gigaset T300/T500  
Send DTMF:  Only activate the option via RTP(RFC2833)  
User-added image
User-added image


Go to Advanced Settings 2

NTP Server:  IP address of the Gigaset T300/T500 

User-added image
User-added image
 

Basic Settings

User-added image
 

Status

User-added image

 
3. Gigaset User account.

Without a Gigaset user account, the door intercom can be used to dial an internal number. Incoming and Outgoing calls are not possible.

Incoming calls to the door intercom are only possible when the door intercom is assigned to a user.

In the Gigaset T300/T500 Go to: Configuration - Users and create a new user, only to be used for the door intercom (user license).

User-added image
  • No labels