You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Network - IP



Device name



IPv4 / IPv6



Dynamic / Static



IP address



Subnet mask



Standard gateway



Preferred DNS



Alternate DNS
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Network - LAN



VLAN tagging



VLAN identifier



VLAN priority
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Base stations - Administration
ConfirmedBaseStations.<mac>.name

Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT network
ConfirmedBaseStations.<mac>.ucTxPower

0

1

0 = Normal power output (Default)
1= Reduce TX power by 8dB for external antenna operation

ConfirmedBaseStations.<mac>.bActivateCell010 = Base station deactivated
1 = Activated base station (Default)
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Base stations - Synchronization

ConfirmedBaseStations.<mac>.ucCluster

110Select the cluster to which the base should be assigned to from the option menu.
ConfirmedBaseStations.<mac>.ucSyncLevel110Select the synchronization level for the base station.
ConfirmedBaseStations.<mac>.bSyncLanMaster01

0 = Off (Default)
1 = LAN Master

Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Provider or PBX profiles
SipProvider.<0-9>.Name IP<1-10>
Name for the provider or PBX profile. This name is shown in the Provider/PBX list
SipProvider.<0-9>.Domain

Domain part of the user address 
SipProvider.<0-9>.ProxyServerAddress

Proxy server address
SipProvider.<0-9>.ProxyServerPort165535Proxy server port (Default 5060)
SipProvider.<0-9>.RegServerAddress

Registration server
SipProvider.<0-9>.RegServerPort165535Registration server port (Default 5060)
SipProvider.<0-9>.RegServerRefreshTimer

Registration refresh time (Default 180)
SipProvider.<0-9>.TransportProtocol131 = UDP
2 = TCP
3 = TLS
SipProvider.<0-9>.UseSIPS01

0 = SIPS disabled (Default)
1 = SIPS enabled

SipProvider.<0-9>.SRTP_Enabled010 = SRTP disabled (Default)
1 = SRTP enabled
SipProvider.<0-9>.AcceptNonSRTPCalls01

0 = Do not accept non-SRTP calls
1 = Accepts non-SRTP calls

SipProvider.<0-9>.DnsQuery010 = A
1 = SRV + A 
SipProvider.<0-9>.FailoverServerEnabled00: off
1: on
Failover Server > Enable registration
SipProvider.<0-9>.FailoverServerAddress

Registration server
SipProvider.<0-9>.FailoverServerPort165535Registration port (Default 5060)
SipProvider.<0-9>.OutboundProxyMode2

0 = Always
2 = Never

SipProvider.<0-9>.OutboundProxyAddress

Outbound server address
SipProvider.<0-9>.OutboundProxyPort165535Outbound proxy port  (Default 5060)
SipProvider.<0-9>.MWISubscription01

0 = Do not send SIP Subscribe for MWI
1 = Send SIP Subscribe for MWI




DTMF over VoIP Connections
SipProvider.<0-9>.AvailableCodecs18,9,8,0


0 = g711u
8 = g711a
9 = g722
18 = g729
SipProvider.<0-9>.ActiveCodecs18,9,8,00: g711u
8: g711a
9: g722
18: g729
0 = g711u
8 = g711a
9 = g722
18 = g729
SipProvider.<0-9>.RTPPtime1020, 30Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet.
SipProvider.<0-9>.HoldType010 = Inactive
1 = Sendonly (Default)
SipProvider.<0-9>.CT_HoldTT_Attended010 = Attended Transfer
1 = Unattended Transfer
SipProvider.<0-9>.CT_HoldTT_Unattended01Settings for Codecs > Hold towards Transfer-Target > Unattended Transfer
SipProvider.<0-9>.CLIPSource020 = FROM
1 = PPI+FROM
2 = PAI+PPI+FROM (Default)
Call Completion on


Call Completion off


Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Mobile devices - Administration
hs.<ipui>.RegStatus


hs.<ipui>.DECT_AC



Authentication Code (PIN)
SipAccount.<ipui>.AuthName

SIP Authentication name
SipAccount.<ipui>.AuthPassword

SIP Authentication password
SipAccount.<ipui>.UserName

SIP Username
SipAccount.<ipui>.DisplayName

SIP Display name
SipAccount.<ipui>.ProviderId

VoIP provider
hs.<ipui>.DirectAccessDir

Directory for direct access
hs.<ipui>.IntKeyDir

Corporate directory for INT key
hs.<ipui>.AutoLookupDir

Automatic look-up



LDAP phonebook
hs.<ipui>.LDAPUseSIPCredentials

LDAP Use personal provider data (SIP)
hs.<ipui>.LDAPUsername

LDAP Username
hs.<ipui>.LDAPPassword

LDAP Password
SipAccount.<ipui>.VoiceMailMailbox

Voicemail box number / name
SipAccount.<ipui>.VoiceMailActive

Activate Voicemail box
hs.<ipui>.CallManagerCallsVia

Accept calls directly via Call Manager

hs.<ipui>.SaveMissedCalls

hs.<ipui>.SaveAcceptedCalls



Missed/accepted calls count

hs.<ipui>.ShowMissedCalls



Flashing LED (MWI) for missed calls

hs.<ipui>.ShowMissedAlarms



Flashing LED (MWI) for missed alarms

hs.<ipui>.ShowMissedNetAM



Flashing LED (MWI) for network mailbox
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Mobile devices - Registration Center




Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - VoIP
DmGlobal.0.Port165535SIP port (Default 5060)
Secure

Secure SIP port (Default 5061)
DmGlobal.0.Timers_T1

SIP timer T1 (Default 500)
DmGlobal.0.Timers_Session

SIP session timer (Default 1800)
DmGlobal.0.Timers_FailedRegistration

Failed registration retry timer (Default 300)
DmGlobal.0.Timers_Subscription

Subscription timer (Default 1800)
DmGlobal.0.PRACK010 = PRACK disabled
1 = PRACK enabled



SIP Security Password

DmGlobal.0.QoS_SIP_DSCP



SIP ToS / DiffServ (Default 34)

DmGlobal.0.QoS_RTP_DSCP



RTP ToS / DiffServ (Default 46)
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - Audio
DmGlobal.0.WidebandEnabled010 = Wideband with codec G.722 disabled
1 = Wideband with codec G.722 disabled
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - Call settings

Telephony.0.CT_ViaRKey

010: off
1: on

Telephony.0.CT_ByOnHook

010: off
1: on

Telephony.0.CT_AutoDetermineAddress

010: off
1: on

Telephony.0.AccessCode



Access Code

Telephony.0.AccessCodeFor



0 = Outgoing calls list
1 = Incoming calls list
2 = LDAP
3 = Local directory
4 = Public net directory
5 = Dial editor 

AreaCodes.0.Country

Germany


Country

AreaCodes.0.Int_Prefix

0
International Prefix

AreaCodes.0.Int_Code

49
International Area code

AreaCodes.0.Local_Prefix

0
Local Prefix

AreaCodes.0.Local_Code



Local Area code

Telephony.0.ToneScheme

Germany


Tone scheme
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Online directories - Public

XMLDir.0.ProviderName

Public


Directory name

XMLDir.0.ServerURL



Server address

XMLDir.0.Username



Username

XMLDir.0.Password



Password
Netdir.4.Activated

Enable Public White Pages



Maximum number of entries

XMLDir.0.WhitePagesDirName



Directory name

XMLDir.0.StartWithListWP

010: off
1: on
Netdir.5.Activated

Enable Public Yellow Pages

XMLDir.0.YellowPagesDirName



Directory name

XMLDir.0.StartWithListYP

010: off
1: on
Netdir.6.Activated

Enable Public Private Pages

XMLDir.0.PrivatePagesDirName



Directory name

XMLDir.0.StartWithListPP

0
0: off
1: on
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Online directories - Corporate

LDAPDir.0.DirName



LDAP Directory name
Netdir.0.Activated

LDAP Enable directory

LDAPDir.0.ServerURL



LDAP Server address

LDAPDir.0.ServerPort

165535LDAP Server port (Default 389)

LDAPDir.0.BaseDN



LDAP Search base (BaseDN)

LDAPDir.0.UseIndividualCredentials

010: off
1: on

LDAPDir.0.Username



LDAP Username

LDAPDir.0.Password



LDAP data server Password

LDAPDir.0.StartWithList

010: off
1: on

LDAPDir.0.NameFilter

(|(cn=%)(sn=%))


LDAP Name filter

LDAPDir.0.NumberFilter

(|(telephoneNumber=%)(mobile=%))


LDAP Number filter

LDAPDir.0.AdditionalFilter1Name

City


LDAP Additional filter #1 name

LDAPDir.0.AdditionalFilter1

(|(l=%))


LDAP Additional filter #1 value

LDAPDir.0.AdditionalFilter2Name

Street


LDAP Additional filter #2 name
LDAPDir.0.AdditionalFilter2

(|(street=%))


LDAP Additional filter #2 value

LDAPDir.0.DisplayName

%sn, %givenName


LDAP Display format

LDAPDir.0.MaxNrOfSearchEntries

50
LDAP Max. number of search results

LDAPDir.0.ItemFN



Configuration of directory items > First name

LDAPDir.0.ItemLN



Configuration of directory items > Surname

LDAPDir.0.ItemPH



Configuration of directory items > Phone (home)
LDAPDir.0.ItemPO

Configuration of directory items > Phone (office)
LDAPDir.0.ItemPM

Configuration of directory items > Phone (mobile)

LDAPDir.0.ItemEM



Configuration of directory items > E-mail

LDAPDir.0.ItemFX



Configuration of directory items > Fax

LDAPDir.0.ItemCP



Configuration of directory items > Company

LDAPDir.0.ItemST



Configuration of directory items > Street

LDAPDir.0.ItemCT



Configuration of directory items > City

LDAPDir.0.ItemZP



Configuration of directory items > Zip

LDAPDir.0.ItemCO



Configuration of directory items > Country

LDAPDir.0.ItemAA



Configuration of directory items > Additional attribute

LDAPDir.0.IsAdditionalAttributeDialable

010: off
1: on
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Online directories - XML

Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - System - Web configurator
WebUIAccounts.1.Password

Change Password > New password (Admin)



CLI Password
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - System - Provisioning and configuration
Provisioning.global.ProvisioningServer

http://profile.gigaset.net/device/%DVID/


Provisioning and configuration > Provisioning server
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - System - Security



Accept all certificates
Security.global.HTTPAuthUsername

HTTP Authentication > HTTP digest username

Security.global.HTTPAuthPassword



HTTP Authentication > HTTP digest password
Web-interface: Settings - System - System log
DmGlobal.0.SysLogEnable010: off
1: on
DmGlobal.0.SysLogServer

Server address
DmGlobal.0.SysLogServerPort

Server port (Default 514)

StateInfo.global.DebugLevelMask

DWE
D = debug
W = warning
E = error
I = info
T = test



SNMP manager address



SNMP manager port
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - System - Date and time
DmGlobal.0.NtpServer



0.europe.pool.ntp.org,1.europe.pool.ntp.org,

2.europe.pool.ntp.org,3.europe.pool.ntp.org

DmGlobal.0.TimeZone

timezones.txt



Act as Local Time Server
Web-interface: Settings - System - Date and time



URL to firmware file



Planned schedule
Hidden Parameters
DmGlobal.0.DECTCipherDisable

> disable ciphering
0: off
1: on

DmGlobal.0.DECTEcoMode

> eco mode
0: off
1: on

DmGlobal.0.DECTEnhancedEncryption

> enhanced encryption
0: off
1: on

DmGlobal.0.DECTBlindslots

> blind slot configuration (12 slots)
bit 0x0800 = slot 0
bit 0x0001 = slot 11

DmGlobal.0.DECTAvailFrequencies

> available frequencies configuration (10 f.)
> this can be used to disable frequencies
> frequencies blocked by reg-domain will not be enabled by this setting
bit 0x0200 = channel 0
bit 0x0001 = channel 9

DmGlobal.0.DECTCfSettings

> cf mode
> bit 0..3 = number of fragments used for cf
bit 7=0: off
bit 7=1: on

DmGlobal.0.DECTTBR6Mode

> DECT TBR6 test mode
0: off
1: on

DmGlobal.0.DectEchoConfig

> DECT echo configuration mask:
bit 0x01: BS DECT echo cancellor allowed
bit 0x02: BS DECT echo suppressor allowed
bit 0x04: HS suppessor allowed
bit 0x80: force BS echo suppressor/cancellor

DmGlobal.0.NetworkEchoConfig

> BS network echo configuration:
bit 0x01: BS network suppressor on





  • No labels