You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 14 Next »

Parameter name

Description
Web-interface: Settings - Network - IP

Device nameValue



Device name in the network: Label for the device. It is used to identify the device in network communication.

Address AssignmentValue



Network type: IPv4 / IPv6 (planned)



IP address type: Dynamic / Static



IP address:



Subnet mask:



Standard gateway:



Preferred DNS:



Alternate DNS:
Web-interface: Settings - Network - LAN

VLANValue



VLAN tagging:


0 - 4094VLAN identifier:


0 - 7VLAN priority:
Web-interface: Settings - Base stations - Administration
ConfirmedBaseStations.<mac>.name

Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT network
ConfirmedBaseStations.<mac>.ucTxPower

0

1

0 = Normal power output (Default)
1= Reduce TX power by 8dB for external antenna operation

ConfirmedBaseStations.<mac>.bActivateCell010 = Base station deactivated
1 = Activated base station (Default)
Web-interface: Settings - Base stations - Synchronization

ConfirmedBaseStations.<mac>.ucCluster

110Select the cluster to which the base should be assigned to from the option menu.
ConfirmedBaseStations.<mac>.ucSyncLevel110Select the synchronization level for the base station.
ConfirmedBaseStations.<mac>.bSyncLanMaster01

0 = Off (Default)
1 = LAN Master

Web-interface: Settings - Provider or PBX profiles

VoIP ProviderValue
SipProvider.<0-9>.Name 
Connection name or number: Name for the provider or PBX profile. This name is shown in the Provider/PBX list

Phone systemValue
SipProvider.<0-9>.PhoneSystem

System:

  • Automatic (0)
  • Standard
  • Broadsoft
  • Openscape
  • Nfon
  • Swyx
  • 3CX

General data of your service providerValue
SipProvider.<0-9>.Domain
Domain: Domain part of the user address (SIP URI)
SipProvider.<0-9>.ProxyServerAddressIP address/ DNS nameProxy server address: The SIP proxy is your VoIP provider's gateway server and the first SIP server, where the device should send SIP requests and expects to receive requests
SipProvider.<0-9>.ProxyServerPort1 - 65535Proxy server port (Default 5060): Enter the port number of the first SIP server, where the device should send SIP requests and expects to receive requests.
SipProvider.<0-9>.RegServerAddressIP address/ DNS nameRegistration server: The registration server assigns the public IP address/port number that was used by the phone on registration to your SIP address (username@domain)
SipProvider.<0-9>.RegServerPort1 - 65535Registration server port (Default 5060): Enter the communication port used on the registrar.
SipProvider.<0-9>.RegServerRefreshTimer

1 - 5 digits

Registration refresh time (Default 180): Enter the time intervals (in seconds) at which the phone should repeat the registration with the VoIP server (SIP proxy)
SipProvider.<0-9>.TransportProtocol1 - 3

Transport protocol:
1 = UDP
2 = TCP
3 = TLS

SipProvider.<0-9>.UseSIPS0 - 1

Use SIP Security (SIPS):
0 = SIPS disabled (Default)
1 = SIPS enabled

SipProvider.<0-9>.SRTP_Enabled0 - 1Secure Real Time Protocol: Security (RTP) is activated for voice connections.
0 = SRTP disabled (Default)
1 = SRTP enabled
SipProvider.<0-9>.AcceptNonSRTPCalls0 - 1

Accept non-SRTP calls: Insecure calls are accepted even when SRTP is activated.
0 = Do not accept non-SRTP calls
1 = Accepts non-SRTP calls


RedundancyValue
SipProvider.<0-9>.DnsQuery0 - 1

Redundancy - DNS query: VoIP providers provide SIP server redundancy for load balancing and service reliability. SIP servers can be identified by DNS using different queries:.
0 = A
1 = SRV + A 


Failover ServerValue
SipProvider.<0-9>.FailoverServerEnabled0 -1Failover Server:
0 = Off
1 = On
SipProvider.<0-9>.FailoverServerAddressIP address/ DNS nameRegistration server: Enter the IP address or the (fully qualified) DNS name of the failover registration server.
SipProvider.<0-9>.FailoverServerPort1- 65535Registration port (Default 5060): The communication port used on the failover registrar.

Network data of your service providerValue
SipProvider.<0-9>.OutboundProxyMode0 - 2

Outbound proxy mode:
0 = Always
2 = Never

SipProvider.<0-9>.OutboundProxyAddressIP address/ DNS nameOutbound server address:
SipProvider.<0-9>.OutboundProxyPort1 - 65535Outbound proxy port  (Default 5060)
SipProvider.<0-9>.MWISubscription0 -1

SIP SUBSCRIBE for Net-AM MWI: When activated a subscription is established for the purpose of receiving notifications about new messages on the network mailbox
0 = Do not send SIP Subscribe for MWI
1 = Send SIP Subscribe for MWI


DTMF over VoIP ConnectionsValue
SipProvider.<0-9>.AutoNegOfDTMFTransmission

Automatic negotiation of DTMF transmission:

2 = Yes


Settings for CodecsValue
SipProvider.<0-9>.ActiveCodecs18,9,8,0

Active codecs:

0 = g711u
8 = g711a
9 = g722
18 = g729

SipProvider.<0-9>.RTPPtime20, 30RTP Packetisation Time (ptime): Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet.
SipProvider.<0-9>.HoldType0 - 1

Signalling options for 'Hold' in Session Description Protocol (SDP): Call hold means that a user request to put an active call on hold. The holding part sends a re‑INVITE request to the held client with an SDP offer (Session Description Protocol). This SDP offer contains the attribute line a=inactive or a=sendonly.

0 = Inactive
1 = Sendonly (Default)

SipProvider.<0-9>.CT_HoldTT_Attended0 - 10 = Attended Transfer
1 = Unattended Transfer
SipProvider.<0-9>.CT_HoldTT_Unattended0 - 1Settings for Codecs > Hold towards Transfer-Target > Unattended Transfer

Display of Caller InformationValue
SipProvider.<0-9>.CLIPSource0 - 20 = FROM
1 = PPI+FROM
2 = PAI+PPI+FROM (Default)

Service CodesValue
SipProvider.<0-9>.ServiceCode_CC_On
Call Completion on (CCBS, CCNR):
SipProvider.<0-9>.ServiceCode_CC_Off
Call Completion off (CCBS, CCNR):

CSTAValue
SipProvider.<0-9>.CSTA_IsActive

Active:

Yes
No

SipProvider.<0-9>.CSTA_IsExternal

External:

Yes
No

SipProvider.<0-9>.CSTA_Address
Address:
SipProvider.<0-9>.CSTA_Port
Port:
SipProvider.<0-9>.CSTA_UseSips

Use SIP Security (SIPS):

Yes
No

SipProvider.<0-9>.CSTA_RegServerRefreshTimer
Registration refresh time:
SipProvider.<0-9>.CSTA_TransportProtocol

Transport protocol:

UDP
TCP
TLS

SipProvider.<0-9>.CSTA_DnsQuery

DNS query:

A
SRV + A





SipProvider.<0-9>.AllowRouteHeaders

SipProvider.<0-9>.DnDServiceCodeOff

SipProvider.<0-9>.DnDServiceCodeOn

SipProvider.<0-9>.DnDType

SipProvider.<0-9>.RequestCheckOpt

SipProvider.<0-9>.STUNAddress

SipProvider.<0-9>.STUNEnabled

SipProvider.<0-9>.STUNPort

SipProvider.<0-9>.STUNRefreshTimer

Web-interface: Settings - Mobile devices - Administration

Mobile device
hs.<ipui>.Ipui


hs.<ipui>.RegStatus


hs.<ipui>.DECT_AC



Authentication Code (PIN)

Personal provider data
SipAccount.<ipui>.Active


SipAccount.<ipui>.AuthName

SIP Authentication name
SipAccount.<ipui>.AuthPassword

SIP Authentication password
SipAccount.<ipui>.UserName

SIP Username
SipAccount.<ipui>.DisplayName

SIP Display name
SipAccount.<ipui>.ProviderId

VoIP provider
SipAccount.<ipui>.AuthenticateAutoAnswerCall


SipAccount.<ipui>.CLIR


SipAccount.<ipui>.CallDivert_Active


SipAccount.<ipui>.CallDivert_Delay


SipAccount.<ipui>.CallDivert_Mode


SipAccount.<ipui>.CallDivert_Target


SipAccount.<ipui>.CallWaiting


SipAccount.<ipui>.DnDActive



Online directories

hs.<ipui>.DirectAccessDir

Directory for direct access
hs.<ipui>.IntKeyDir

Corporate directory for INT key
hs.<ipui>.AutoLookupDir

Automatic look-up

LDAP authentication
hs.<ipui>.LDAPId

Selected LDAP book
hs.<ipui>.LDAPShowProviders

Show other LDAP servers
hs.<ipui>.LDAPAuthType

LDAP authorization type
hs.<ipui>.LDAPUseSIPCredentials

LDAP Use personal provider data (SIP)
hs.<ipui>.LDAPUsername

LDAP Username
hs.<ipui>.LDAPPassword

LDAP Password

Network mailbox configuration
SipAccount.<ipui>.VoiceMailMailbox

Voicemail box number / name
SipAccount.<ipui>.VoiceMailActive

Activate Voicemail box

Group pick-up

SipAccount.<ipui>.OpenScapeGroupPickupAddress

Call number or SIP name (URI)
SipAccount.<ipui>.OpenScapeGroupPickupActive

Activate group pick-up

Call manager

hs.<ipui>.CallManagerCallsVia

Accept calls directly via Call Manager

Missed calls and alarms

hs.<ipui>.SaveMissedCalls

hs.<ipui>.SaveAcceptedCalls



Missed/accepted calls count

hs.<ipui>.ShowMissedCalls



Flashing LED (MWI) for missed calls

hs.<ipui>.ShowMissedAlarms



Flashing LED (MWI) for missed alarms

hs.<ipui>.ShowMissedNetAM



Flashing LED (MWI) for network mailbox

CSTA

SipAccount.<ipui>.CSTA_Username

Username
SipAccount.<ipui>.CSTA_AuthName

Authentication name
SipAccount.<ipui>.CSTA_AuthPassword

Authentication password
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Mobile devices - Registration Center




Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - VoIP
DmGlobal.0.Port165535SIP port (Default 5060)
Secure

Secure SIP port (Default 5061)
DmGlobal.0.Timers_T1

SIP timer T1 (Default 500)
DmGlobal.0.Timers_Session

SIP session timer (Default 1800)
DmGlobal.0.Timers_FailedRegistration

Failed registration retry timer (Default 300)
DmGlobal.0.Timers_Subscription

Subscription timer (Default 1800)
DmGlobal.0.PRACK010 = PRACK disabled
1 = PRACK enabled



SIP Security Password

DmGlobal.0.QoS_SIP_DSCP



SIP ToS / DiffServ (Default 34)

DmGlobal.0.QoS_RTP_DSCP



RTP ToS / DiffServ (Default 46)
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - Audio
DmGlobal.0.WidebandEnabled010 = Wideband with codec G.722 disabled
1 = Wideband with codec G.722 disabled
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - Call settings

Telephony.0.CT_ViaRKey

010: off
1: on

Telephony.0.CT_ByOnHook

010: off
1: on

Telephony.0.CT_AutoDetermineAddress

010: off
1: on

Telephony.0.AccessCode



Access Code

Telephony.0.AccessCodeFor



0 = Outgoing calls list
1 = Incoming calls list
2 = LDAP
3 = Local directory
4 = Public net directory
5 = Dial editor 

AreaCodes.0.Country

Germany


Country

AreaCodes.0.Int_Prefix

0
International Prefix

AreaCodes.0.Int_Code

49
International Area code

AreaCodes.0.Local_Prefix

0
Local Prefix

AreaCodes.0.Local_Code



Local Area code

Telephony.0.ToneScheme

Germany


Tone scheme
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Online directories - Public

XMLDir.0.ProviderName

Public


Directory name

XMLDir.0.ServerURL



Server address

XMLDir.0.Username



Username

XMLDir.0.Password



Password
Netdir.4.Activated

Enable Public White Pages



Maximum number of entries

XMLDir.0.WhitePagesDirName



Directory name

XMLDir.0.StartWithListWP

010: off
1: on
Netdir.5.Activated

Enable Public Yellow Pages

XMLDir.0.YellowPagesDirName



Directory name

XMLDir.0.StartWithListYP

010: off
1: on
Netdir.6.Activated

Enable Public Private Pages

XMLDir.0.PrivatePagesDirName



Directory name

XMLDir.0.StartWithListPP

0
0: off
1: on
Web-interface: Settings - Online directories - Corporate

Access to LDAP server

LDAPDir.0.DirName

max. 20 charactersDirectory name:
???????
Enable directory

LDAPDir.0.ServerURL

IP address/ DNS nameServer address: Enter the URL of the LDAP server

LDAPDir.0.ServerPort

1 - 65535Server port: Enter the port the LDAP server expects database requests (Default: 389)

LDAPDir.0.BaseDN


Search base (BaseDN): The LDAP database is hierarchical in design. With the LDAP Search base (BaseDN) parameter, stipulate in which area the search should begin.

LDAPDir.0.Username

max. 254 charactersUsername: Enter a global username for the user access to the LDAP director.

LDAPDir.0.Password

max. 254 charactersPassword: Enter a global password for the user access to the LDAP directory.

Search in LDAP databaseValue

LDAPDir.0.StartWithList

0 - 1

Enable List mode: Define what should be initially shown, when the user opens the LDAP directory

0: off
1: on

LDAPDir.0.NameFilter

(|(cn=%)(sn=%))Name filter: The name filter decides which attribute is used for the search.

LDAPDir.0.NumberFilter


(|(telephoneNumber=%)(mobile=%))Number filter: The number filter stipulates the criteria for the automatic completion of telephone numbers.

LDAPDir.0.AdditionalFilter1Name



Additional filter #1 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed.

LDAPDir.0.AdditionalFilter1


Additional filter #1 value: Enter the value for the attribute entered in the corresponding name field.

LDAPDir.0.AdditionalFilter2Name


Additional filter #2 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed.
LDAPDir.0.AdditionalFilter2
Additional filter #2 value: Enter the value for the attribute entered in the corresponding name field.

LDAPDir.0.DisplayName


Display format: In this field you can stipulate how the search result is to be displayed on the handset.

LDAPDir.0.MaxNrOfSearchEntries

50Max. number of search results:

Configuration of directory itemsValue

LDAPDir.0.ItemFN


First name

LDAPDir.0.ItemLN


Surname

LDAPDir.0.ItemPH


Phone (home)
LDAPDir.0.ItemPO
Phone (office)
LDAPDir.0.ItemPM
Phone (mobile)

LDAPDir.0.ItemEM


E-mail

LDAPDir.0.ItemFX


Fax

LDAPDir.0.ItemCP


Company

LDAPDir.0.ItemST


Street

LDAPDir.0.ItemCT


City

LDAPDir.0.ItemZP


Zip

LDAPDir.0.ItemCO


Country

LDAPDir.0.ItemAA


Additional attribute

LDAPDir.0.IsAdditionalAttributeDialable

0 - 1

0: off
1: on

LDAPDir.0.BookNo

LDAPDir.0.MaxNrOfSessions100
LDAPDir.0.TlsMode0 - 1

LDAPDir.0.UseIndividualCredentials

0 - 10: off
1: on
Web-interface: Settings - Online directories - XML

Web-interface: Settings - System - Web configurator
WebUIAccounts.1.Password

Change Password > New password (Admin)



CLI Password
Web-interface: Settings - System - Provisioning and configuration
Provisioning.global.ProvisioningServer

http://profile.gigaset.net/device/%DVID/


Provisioning and configuration > Provisioning server
Web-interface: Settings - System - Security



Accept all certificates
Security.global.HTTPAuthUsername

HTTP Authentication > HTTP digest username

Security.global.HTTPAuthPassword



HTTP Authentication > HTTP digest password
Web-interface: Settings - System - System log
DmGlobal.0.SysLogEnable010: off
1: on
DmGlobal.0.SysLogServer

Server address
DmGlobal.0.SysLogServerPort

Server port (Default 514)

StateInfo.global.DebugLevelMask

DWE
D = debug
W = warning
E = error
I = info
T = test



SNMP manager address



SNMP manager port
Web-interface: Settings - System - Date and time
DmGlobal.0.NtpServer



0.europe.pool.ntp.org,1.europe.pool.ntp.org,

2.europe.pool.ntp.org,3.europe.pool.ntp.org

DmGlobal.0.TimeZone

timezones.txt



Act as Local Time Server
Web-interface: Settings - System - Date and time



URL to firmware file



Planned schedule
Hidden Parameters
DmGlobal.0.DECTCipherDisable

> disable ciphering
0: off
1: on

DmGlobal.0.DECTEcoMode

> eco mode
0: off
1: on

DmGlobal.0.DECTEnhancedEncryption

> enhanced encryption
0: off
1: on

DmGlobal.0.DECTBlindslots

> blind slot configuration (12 slots)
bit 0x0800 = slot 0
bit 0x0001 = slot 11

DmGlobal.0.DECTAvailFrequencies

> available frequencies configuration (10 f.)
> this can be used to disable frequencies
> frequencies blocked by reg-domain will not be enabled by this setting
bit 0x0200 = channel 0
bit 0x0001 = channel 9

DmGlobal.0.DECTCfSettings

> cf mode
> bit 0..3 = number of fragments used for cf
bit 7=0: off
bit 7=1: on

DmGlobal.0.DECTTBR6Mode

> DECT TBR6 test mode
0: off
1: on

DmGlobal.0.DectEchoConfig

> DECT echo configuration mask:
bit 0x01: BS DECT echo cancellor allowed
bit 0x02: BS DECT echo suppressor allowed
bit 0x04: HS suppessor allowed
bit 0x80: force BS echo suppressor/cancellor

DmGlobal.0.NetworkEchoConfig

> BS network echo configuration:
bit 0x01: BS network suppressor on





  • No labels