You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 23 Next »

Parameter name

Description
Web-interface: Settings - Network - IP

Device nameValue



Device name in the network: Label for the device. It is used to identify the device in network communication.

Address AssignmentValue



Network type: IPv4 / IPv6 (planned)



IP address type: Dynamic / Static



IP address:



Subnet mask:



Standard gateway:



Preferred DNS:



Alternate DNS:
Web-interface: Settings - Network - LAN

VLANValue



VLAN tagging:


0 - 4094VLAN identifier:


0 - 7VLAN priority:
Web-interface: Settings - Base stations - Administration
ConfirmedBaseStations.<mac>.name

Name / Location This name should make it easier to assign the base station within the logical and spatial structure of the DECT network
ConfirmedBaseStations.<mac>.ucTxPower

0

1

0 = Normal power output (Default)
1= Reduce TX power by 8dB for external antenna operation

ConfirmedBaseStations.<mac>.bActivateCell010 = Base station deactivated
1 = Activated base station (Default)
Web-interface: Settings - Base stations - Synchronization

ConfirmedBaseStations.<mac>.ucCluster

110Select the cluster to which the base should be assigned to from the option menu.
ConfirmedBaseStations.<mac>.ucSyncLevel110Select the synchronization level for the base station.
ConfirmedBaseStations.<mac>.bSyncLanMaster01

0 = Off (Default)
1 = LAN Master

Web-interface: Settings - Provider or PBX profiles

VoIP ProviderValue
SipProvider.<0-9>.Name 
Connection name or number: Name for the provider or PBX profile. This name is shown in the Provider/PBX list

Phone systemValue
SipProvider.<0-9>.PhoneSystem

System:

  • Automatic (0)
  • Standard
  • Broadsoft
  • Openscape
  • Nfon
  • Swyx
  • 3CX

General data of your service providerValue
SipProvider.<0-9>.Domain
Domain: Domain part of the user address (SIP URI)
SipProvider.<0-9>.ProxyServerAddressIP address/ DNS nameProxy server address: The SIP proxy is your VoIP provider's gateway server and the first SIP server, where the device should send SIP requests and expects to receive requests
SipProvider.<0-9>.ProxyServerPort1 - 65535Proxy server port (Default 5060): Enter the port number of the first SIP server, where the device should send SIP requests and expects to receive requests.
SipProvider.<0-9>.RegServerAddressIP address/ DNS nameRegistration server: The registration server assigns the public IP address/port number that was used by the phone on registration to your SIP address (username@domain)
SipProvider.<0-9>.RegServerPort1 - 65535Registration server port (Default 5060): Enter the communication port used on the registrar.
SipProvider.<0-9>.RegServerRefreshTimer

1 - 5 digits

Registration refresh time (Default 180): Enter the time intervals (in seconds) at which the phone should repeat the registration with the VoIP server (SIP proxy)
SipProvider.<0-9>.TransportProtocol1 - 3

Transport protocol:
1 = UDP
2 = TCP
3 = TLS

SipProvider.<0-9>.UseSIPS0 - 1

Use SIP Security (SIPS):
0 = SIPS disabled (Default)
1 = SIPS enabled

SipProvider.<0-9>.SRTP_Enabled0 - 1Secure Real Time Protocol: Security (RTP) is activated for voice connections.
0 = SRTP disabled (Default)

1 = SRTP enabled
SipProvider.<0-9>.AcceptNonSRTPCalls0 - 1

Accept non-SRTP calls: Insecure calls are accepted even when SRTP is activated.
0 = Do not accept non-SRTP calls
1 = Accepts non-SRTP calls


RedundancyValue
SipProvider.<0-9>.DnsQuery0 - 1

Redundancy - DNS query: VoIP providers provide SIP server redundancy for load balancing and service reliability. SIP servers can be identified by DNS using different queries:.
0 = A
1 = SRV + A 


Failover ServerValue
SipProvider.<0-9>.FailoverServerEnabled0 -1Failover Server:
0 = Off
1 = On
SipProvider.<0-9>.FailoverServerAddressIP address/ DNS nameRegistration server: Enter the IP address or the (fully qualified) DNS name of the failover registration server.
SipProvider.<0-9>.FailoverServerPort1- 65535Registration port (Default 5060): The communication port used on the failover registrar.

Network data of your service providerValue
SipProvider.<0-9>.OutboundProxyMode0 - 2

Outbound proxy mode:
0
= Always
2 = Never

SipProvider.<0-9>.OutboundProxyAddressIP address/ DNS nameOutbound server address:
SipProvider.<0-9>.OutboundProxyPort1 - 65535Outbound proxy port  (Default 5060)
SipProvider.<0-9>.MWISubscription0 -1

SIP SUBSCRIBE for Net-AM MWI: When activated a subscription is established for the purpose of receiving notifications about new messages on the network mailbox
0 = Do not send SIP Subscribe for MWI
1 = Send SIP Subscribe for MWI


DTMF over VoIP ConnectionsValue
SipProvider.<0-9>.DTMFTransmission
1 = Audio
2 = RFC 2833
3 = Audio + RFC 2833
4 = SIP INFO
5 = Audio + SIP INFO
6 = RFC 2833 + SIP INFO
7 = Audio + RFC 2833 + SIP INFO
129 = Automatic DTMF Negotiation

Settings for CodecsValue
SipProvider.<0-9>.ActiveCodecs18,9,8,0

Active codecs:

0 = g711u
8 = g711a
9 = g722
18 = g729

SipProvider.<0-9>.RTPPtime20, 30RTP Packetisation Time (ptime): Length of time in milliseconds (10, 20 (Default), 30) represented by the audio data in one packet.
SipProvider.<0-9>.HoldType0 - 1

Signalling options for 'Hold' in Session Description Protocol (SDP): Call hold means that a user request to put an active call on hold. The holding part sends a re‑INVITE request to the held client with an SDP offer (Session Description Protocol). This SDP offer contains the attribute line a=inactive or a=sendonly.

0 = Inactive
1 = Sendonly (Default)

SipProvider.<0-9>.CT_HoldTT_Attended0 - 10 = Attended Transfer
1 = Unattended Transfer
SipProvider.<0-9>.CT_HoldTT_Unattended0 - 1Settings for Codecs > Hold towards Transfer-Target > Unattended Transfer

Display of Caller InformationValue
SipProvider.<0-9>.CLIPSource0 - 20 = FROM
1 = PPI+FROM
2 = PAI+PPI+FROM (Default)

Service CodesValue
SipProvider.<0-9>.ServiceCode_CC_On
Call Completion on (CCBS, CCNR):
SipProvider.<0-9>.ServiceCode_CC_Off
Call Completion off (CCBS, CCNR):

CSTAValue
SipProvider.<0-9>.CSTA_IsActive

Active:

Yes
No

SipProvider.<0-9>.CSTA_IsExternal

External:

Yes
No

SipProvider.<0-9>.CSTA_Address
Address:
SipProvider.<0-9>.CSTA_Port
Port:
SipProvider.<0-9>.CSTA_UseSips

Use SIP Security (SIPS):

Yes
No

SipProvider.<0-9>.CSTA_RegServerRefreshTimer
Registration refresh time:
SipProvider.<0-9>.CSTA_TransportProtocol

Transport protocol:

UDP
TCP
TLS

SipProvider.<0-9>.CSTA_DnsQuery

DNS query:

A
SRV + A





SipProvider.<0-9>.AllowRouteHeaders

SipProvider.<0-9>.DnDServiceCodeOff

SipProvider.<0-9>.DnDServiceCodeOn

SipProvider.<0-9>.DnDType

SipProvider.<0-9>.RequestCheckOpt

SipProvider.<0-9>.STUNAddress

SipProvider.<0-9>.STUNEnabled

SipProvider.<0-9>.STUNPort

SipProvider.<0-9>.STUNRefreshTimer

Web-interface: Settings - Mobile devices
DmGlobal.0.HSIdleDisplay
0 - 1

Displayed name in idle display

0 = Username
1 = Display name

Web-interface: Settings - Mobile devices - Administration

Mobile device
hs.<ipui>.Ipui


hs.<ipui>.RegStatus

ToReg = "To Register", add new Handset
ToDeReg = "To DeRegister", delete existing HS
NotReg = "Not Registered", default value

hs.<ipui>.DECT_AC



Authentication Code (PIN)

Personal provider data
SipAccount.<ipui>.Active


SipAccount.<ipui>.AuthName

SIP Authentication name
SipAccount.<ipui>.AuthPassword

SIP Authentication password
SipAccount.<ipui>.UserName

SIP Username
SipAccount.<ipui>.DisplayName

SIP Display name
SipAccount.<ipui>.ProviderId

VoIP provider
SipAccount.<ipui>.AuthenticateAutoAnswerCall


SipAccount.<ipui>.CLIR


SipAccount.<ipui>.CallDivert_Active


SipAccount.<ipui>.CallDivert_Delay


SipAccount.<ipui>.CallDivert_Mode


SipAccount.<ipui>.CallDivert_Target


SipAccount.<ipui>.CallWaiting


SipAccount.<ipui>.DnDActive



Online directories

hs.<ipui>.DirectAccessDir

Directory for direct access
hs.<ipui>.IntKeyDir

Corporate directory for INT key
hs.<ipui>.AutoLookupDir

Automatic look-up

LDAP authentication
hs.<ipui>.LDAPId

Selected LDAP book
hs.<ipui>.LDAPShowProviders

Show other LDAP servers
hs.<ipui>.LDAPAuthType

LDAP authorization type
hs.<ipui>.LDAPUseSIPCredentials

LDAP Use personal provider data (SIP)
hs.<ipui>.LDAPUsername

LDAP Username
hs.<ipui>.LDAPPassword

LDAP Password

Network mailbox configuration
SipAccount.<ipui>.VoiceMailMailbox

Voicemail box number / name
SipAccount.<ipui>.VoiceMailActive

Activate Voicemail box

0 = Disabled
1 = Enabled


Group pick-up

SipAccount.<ipui>.OpenScapeGroupPickupAddress

Call number or SIP name (URI)
SipAccount.<ipui>.OpenScapeGroupPickupActive

Activate group pick-up

Call manager

hs.<ipui>.CallManagerCallsVia

Accept calls directly via Call Manager

Missed calls and alarms

hs.<ipui>.SaveMissedCalls

hs.<ipui>.SaveAcceptedCalls



Missed/accepted calls count

hs.<ipui>.ShowMissedCalls



Flashing LED (MWI) for missed calls

hs.<ipui>.ShowMissedAlarms



Flashing LED (MWI) for missed alarms

hs.<ipui>.ShowMissedNetAM



Flashing LED (MWI) for network mailbox

CSTA

SipAccount.<ipui>.CSTA_Username

Username
SipAccount.<ipui>.CSTA_AuthName

Authentication name
SipAccount.<ipui>.CSTA_AuthPassword

Authentication password
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Mobile devices - Registration Center




Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - VoIP
DmGlobal.0.Port165535SIP port (Default 5060)
Secure

Secure SIP port (Default 5061)
DmGlobal.0.Timers_T1

SIP timer T1 (Default 500)
DmGlobal.0.Timers_Session

SIP session timer (Default 1800)
DmGlobal.0.Timers_FailedRegistration

Failed registration retry timer (Default 300)
DmGlobal.0.Timers_Subscription

Subscription timer (Default 1800)
DmGlobal.0.PRACK010 = PRACK disabled
1 = PRACK enabled



SIP Security Password

DmGlobal.0.QoS_SIP_DSCP



SIP ToS / DiffServ (Default 34)

DmGlobal.0.QoS_RTP_DSCP



RTP ToS / DiffServ (Default 46)
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - Audio
DmGlobal.0.WidebandEnabled010 = Wideband with codec G.722 disabled
1 = Wideband with codec G.722 disabled
Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Telephony - Call settings

Call Transfer

Telephony.0.CT_ViaRKey

0 - 1

Call transfer via R key: Activated: Users can connect two external callers with each other by pressing the R key. The connections with both parties are terminated.
0 = No
1 = Yes

Telephony.0.CT_ByOnHook

0 - 1

Transfer call by on-hook: Activated: The two participants are connected with one another when the user presses the end call key. The intermediary's connections with the participants are terminated.
0 = No
1 = Yes

Telephony.0.CT_AutoDetermineAddress

0 - 1

Determine transfer target address: Select how the transfer target address (Refer-To URI) is to be derived: From transfer target's AOR (Address of Record). From transfer target's transport address (Contact URI)
0: off
1: on


Access Code

Telephony.0.AccessCode

max. 3 digits (0 - 9, *, R, #, P)Access Code:

Telephony.0.AccessCodeFor


Is added to numbers: Select when the phone numbers should be automatically prefixed with the digits, e.g. when dialling from a call list or a directory.

0 = Outgoing calls list
1 = Incoming calls list
2 = LDAP
3 = Local directory
4 = Public net directory
5 = Dial editor 


Area Codes

AreaCodes.0.Country

Germany

Country: From the option menu select the country or region where your telephone system is to be used . . . the international and national prefix is then entered in the Prefix and Area code fields.


International

AreaCodes.0.Int_Prefix

max. 4 digits, 0-9Prefix:

AreaCodes.0.Int_Code

max. 4 digits, 0-9Area code:

Local

AreaCodes.0.Local_Prefix

max. 4 digits, 0 - 9Prefix:

AreaCodes.0.Local_Code

max. 8 digits, 0 - 9Area code:

Tone Selection

Telephony.0.ToneScheme



Tone scheme: Select the country or region whose ring tones are to be used for your phone from the option menu.

Austria
Belgium
Czech
Denmark
Finland
France
Germany
Retail
Italy
Netherlands
Norway
Poland
Portugal
Slovakia
Spain
Sweden
Switzerland
Turkey
UAE
UK

Parameter nameValue:minValue:maxValue:Allowed
Web-interface: Settings - Online directories - Public

XMLDir.0.ProviderName

Public


Directory name

XMLDir.0.ServerURL



Server address

XMLDir.0.Username



Username

XMLDir.0.Password



Password
Netdir.4.Activated

Enable Public White Pages



Maximum number of entries

XMLDir.0.WhitePagesDirName



Directory name

XMLDir.0.StartWithListWP

010: off
1: on
Netdir.5.Activated

Enable Public Yellow Pages

XMLDir.0.YellowPagesDirName



Directory name

XMLDir.0.StartWithListYP

010: off
1: on
Netdir.6.Activated

Enable Public Private Pages

XMLDir.0.PrivatePagesDirName



Directory name

XMLDir.0.StartWithListPP

0
0: off
1: on
Web-interface: Settings - Online directories - Corporate

Access to LDAP server

LDAPDir.0.DirName

max. 20 charactersDirectory name:
???????
Enable directory

LDAPDir.0.ServerURL

IP address/ DNS nameServer address: Enter the URL of the LDAP server

LDAPDir.0.ServerPort

1 - 65535Server port: Enter the port the LDAP server expects database requests (Default: 389)

LDAPDir.0.BaseDN


Search base (BaseDN): The LDAP database is hierarchical in design. With the LDAP Search base (BaseDN) parameter, stipulate in which area the search should begin.

LDAPDir.0.Username

max. 254 charactersUsername: Enter a global username for the user access to the LDAP director.

LDAPDir.0.Password

max. 254 charactersPassword: Enter a global password for the user access to the LDAP directory.

Search in LDAP databaseValue

LDAPDir.0.StartWithList

0 - 1

Enable List mode: Define what should be initially shown, when the user opens the LDAP directory

0: off
1: on

LDAPDir.0.NameFilter

(|(cn=%)(sn=%))Name filter: The name filter decides which attribute is used for the search.

LDAPDir.0.NumberFilter


(|(telephoneNumber=%)(mobile=%))Number filter: The number filter stipulates the criteria for the automatic completion of telephone numbers.

LDAPDir.0.AdditionalFilter1Name



Additional filter #1 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed.

LDAPDir.0.AdditionalFilter1


Additional filter #1 value: Enter the value for the attribute entered in the corresponding name field.

LDAPDir.0.AdditionalFilter2Name


Additional filter #2 name: Enter the name of an additional attribute that will be offered to the user in order to specify the search more detailed.
LDAPDir.0.AdditionalFilter2
Additional filter #2 value: Enter the value for the attribute entered in the corresponding name field.

LDAPDir.0.DisplayName


Display format: In this field you can stipulate how the search result is to be displayed on the handset.

LDAPDir.0.MaxNrOfSearchEntries

50Max. number of search results:

Configuration of directory itemsValue

LDAPDir.0.ItemFN


First name

LDAPDir.0.ItemLN


Surname

LDAPDir.0.ItemPH


Phone (home)
LDAPDir.0.ItemPO
Phone (office)
LDAPDir.0.ItemPM
Phone (mobile)

LDAPDir.0.ItemEM


E-mail

LDAPDir.0.ItemFX


Fax

LDAPDir.0.ItemCP


Company

LDAPDir.0.ItemST


Street

LDAPDir.0.ItemCT


City

LDAPDir.0.ItemZP


Zip

LDAPDir.0.ItemCO


Country

LDAPDir.0.ItemAA


Additional attribute

LDAPDir.0.IsAdditionalAttributeDialable

0 - 1

0: off
1: on

LDAPDir.0.BookNo

LDAPDir.0.MaxNrOfSessions100
LDAPDir.0.TlsMode0 - 1

LDAPDir.0.UseIndividualCredentials

0 - 10: off
1: on
Web-interface: Settings - Online directories - XML

Web-interface: Settings - System - Web configurator
WebUIAccounts.1.Password

Change Password > New password (Admin)



CLI Password
Web-interface: Settings - System - Provisioning and configuration

Provisioning and configuration

Provisioning.global.ProvisioningServermax. 255 characters

Provisioning server: Enter the URL of your provisioning server in the text field.

Web-interface: Settings - System - Security



Accept all certificates
Security.global.HTTPAuthUsername

HTTP Authentication > HTTP digest username

Security.global.HTTPAuthPassword



HTTP Authentication > HTTP digest password
Web-interface: Settings - System - System log
DmGlobal.0.SysLogEnable010: off
1: on
DmGlobal.0.SysLogServer

Server address
DmGlobal.0.SysLogServerPort

Server port (Default 514)

StateInfo.global.DebugLevelMask

DWE
D = debug
W = warning
E = error
I = info
T = test



SNMP manager address



SNMP manager port
Web-interface: Settings - System - Date and time
DmGlobal.0.NtpServer



0.europe.pool.ntp.org,1.europe.pool.ntp.org,

2.europe.pool.ntp.org,3.europe.pool.ntp.org

DmGlobal.0.TimeZone

timezones.txt



Act as Local Time Server
Web-interface: Settings - System - Date and time



URL to firmware file



Planned schedule
Hidden Parameters
DmGlobal.0.DECTCipherDisable

> disable ciphering
0: off
1: on

DmGlobal.0.DECTEcoMode

> eco mode
0: off
1: on

DmGlobal.0.DECTEnhancedEncryption

> enhanced encryption
0: off
1: on

DmGlobal.0.DECTBlindslots

> blind slot configuration (12 slots)
bit 0x0800 = slot 0
bit 0x0001 = slot 11

DmGlobal.0.DECTAvailFrequencies

> available frequencies configuration (10 f.)
> this can be used to disable frequencies
> frequencies blocked by reg-domain will not be enabled by this setting
bit 0x0200 = channel 0
bit 0x0001 = channel 9

DmGlobal.0.DECTCfSettings

> cf mode
> bit 0..3 = number of fragments used for cf
bit 7=0: off
bit 7=1: on

DmGlobal.0.DECTTBR6Mode

> DECT TBR6 test mode
0: off
1: on

DmGlobal.0.DectEchoConfig

> DECT echo configuration mask:
bit 0x01: BS DECT echo cancellor allowed
bit 0x02: BS DECT echo suppressor allowed
bit 0x04: HS suppessor allowed
bit 0x80: force BS echo suppressor/cancellor

DmGlobal.0.NetworkEchoConfig

> BS network echo configuration:
bit 0x01: BS network suppressor on





  • No labels