Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Next »

Introduction

This feature works different for the new Maxwell 3 and Basic range, compared with the other Gigaset pro products.

Maxwell 3/B, here you can define the provisioning URL or using the Redirect server to link direct to the xml file.

Other Gigaset pro products, via special provisioning parameter:

When this parameter is configured, the device will direct download the (xml) configuration file from the http server. If not configured, the Gigaset File structure is needed. This parameter can be configured using:

  • Auto provisioning

  • Web-Interface (Desktop devices and N510)

Maxwell 3/B

On the server, the xml file contains info about:

  • Firmware
  • Settings (nvm), all parameters can be found here.
  • Certificates

In the web-interface you can see the Provisioning URL in the field Provisioning server. You can configure this URL via:
  1. Web-interface
  2. DHCP option 114
  3. SIP Multicast

Format:

Redirect server, here you can also link the device to the XML file using the same format as described above.


Maxwell 3/B example

<?xml version="1.0" encoding="UTF-8"?>

<provisioning version="1.1" productID="mx3b">

  <firmware>

    <file version="1.14.4" url="http://192.168.178.101/device/maxwell/GC_MAX_1.14.4-pre-release.bin" />

  </firmware>

  <nvm>

    <param name="PhoneUI.Settings.Confirmations" value="12121"/>

    <param name="PhoneUI.Settings.KeyClick" value="221122"/>

  </nvm>

  <custom>

    <step type="certificate" url="/custom/certificate.cert" flags="FORCE_ACCEPT"/>

  </custom>

</provisioning>

 

N510 IP PRO

XML parameters:

<S_CONFIGFILE_URL class="string" value='"provider URL/xml/<MAC address>.xml"'/>

Please take care that extra ' ' are used.

 

 

Tag Name

 

 

Value

 

 

Location in web-interface

 

S_CONFIGFILE_URL

 

or

 

BS_IP_Data.aucS_CONFIGFILE_URL[0]

max. 74 characters from (0-9,a-z,A-Z,-,.); default is empty
it must be complete/proper URL such as http://domain/path/filename.xml .

From software 210 and higher, the placeholder %MACD is allowed, the device will replace this with it's own MAC address.

Example: http://domain/path/%MACD.xml

Important, the xml file name must contain capital letters

<S_CONFIGFILE_URL class="string" value='"provider URL/xml/<MAC address>.xml"'/>

or

<BS_IP_Data.aucS_CONFIGFILE_URL[0] class="symb_item" value='"provider URL/xml/<MAC address>.xml"'/>

Settings -> Management -> Firmware Update -> Configuration file URL

 

 

<?xml version="1.0" encoding="ISO-8859-1"?>
<ProviderFrame xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="N510.xsd">
<Provider>
<!-- Please enter the correct MAC Address example: 3E2F800E1234
Please enter correct Version value: DDMMYYHHMM example: 2811120928
Please enter a Profile name
If not correct, no setting will be done
-->
<MAC_ADDRESS value="7C2F80170386"/>
<PROFILE_NAME class="string" value="IPDEC"/>

<I_PHONE_SYSTEM class="integer" value="5"/>

<S_CONFIGFILE_URL class="string" value='"<provider URL>/device/xml/%MACD.xml"'/>

</Provider>

</ProviderFrame>

 

Web-interface:

 

Settings - Management - Firmware Update - Configuration file URL:

 

N720 IP PRO

 

SYMB_ITEM ID="BS_IP_Data.aucS_CONFIGFILE_URL" class="string" value='"http://....path to xml file...."'/>

With this values IWU will download profile from aucS_CONFIGFILE_URL after every check-sync /reboot.

 

 

Tag Name

 

 

Value

 

 

Location in web-interface

 

BS_IP_Data.aucS_CONFIGFILE_URL

max. 255 characters from (0-9,a-z,A-Z,-,.); default is empty
it must be complete/proper URL such as http://domain/path/filename.xml .

Not available.

 

x. 255 characters from (0-9,a-z,A-Z,-,.); default is empty
it must be complete/proper URL such as http://domain/path/filename.xml .

System -> Firmware Update -> Configuration file URL

 

 

<?xml version="1.0" encoding="ISO-8859-1"?>
<ProviderFrame xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="N510.xsd">
<Provider>

<MAC_ADDRESS value="FFFFFFFFFFFF"/>
<PROFILE_NAME class="string" value="Test"/>

<SYMB_ITEM ID="BS_IP_Data.aucS_CONFIGFILE_URL" class="symb_item" value='"http://192.168.178.101/device/xml/test.xml"'/>

</Provider>

</ProviderFrame>

 

Web-interface:

Settings - Management - Firmware Update - Configuration file (URL):



Maxwell 10 IP PRO

XML parameters:

<S_CONFIGFILE_URL class="string" value="provider URL/xml/<MAC address>.xml"/>

 

 

Tag Name

 

 

Value

 

 

Location in web-interface

 

S_CONFIGFILE_URL

max. 74 characters from (0-9,a-z,A-Z,-,.); default is empty
it must be complete/proper URL such as http://domain/path/filename.xml .

Important, the xml file name must contain capital letters.

The usage of placeholders like %MACD will be supported soon.

Settings -> System -> Auto Provisioning -> Configuration file URL

 

 

<?xml version="1.0" encoding="ISO-8859-1"?>
<ProviderFrame>
.<Provider>
<MAC_ADDRESS value="FF:FF:FF:FF:FF:FF"/>
..<PROFILE_NAME class="string" value="PBX"/>

..<S_CONFIGFILE_URL class="string" value="http://192.168.178.101/device/xml/FFFFFFFFFFFF.xml"/>

.</Provider>
</ProviderFrame>

 

Web-interface:

 

Settings - System - Auto Provisioning:

 

 


DeviceTested with
N510Software 210
N720Software 93
Maxwell 10

Software 1.2.7

Maxwell 3/BSoftware 1.14.3
  • No labels