Here we explain how you change a small size system to a medium size system.
| Small sized system | Medium sized system |
|
---|
DECT Integrator & DECT Manager | DECT Base is activated | DECT Base is deactivated | By deactivating the DECT base on the Integrator/manager you switch from small to medium. | DECT Bases | Maximum: 10 DECT base Integrator/Manager + 9 extra DECT Base only | Maximum: 60 |
| DECT handsets | Maximum: 50 | Maximum: 250 |
| Parallel calls | Maximum: 10 | Maximum: 60 |
|
Like mentioned above you need to disable the DECT base on the Integrator/Manager to switch from Small to Medium. This can be done in 2 ways. - Edit the DECT manager and change the Capacity from Small to Medium.
- Deactivate the Base station.
If you try to connect the 11e basestation to a Small system, you will get the message: "System limit has been exceeded"
If you switch from small to medium then: - You can not use the DECT base from the manager anymore, an extra DECT base is then needed to cover this.
- If you change the device role from Small to Medium and the local base station was synchronization level 1, it will be deactivated. Base stations synchronization needs to be adjusted in order to re-synchronize the system. So first change the levels and then disable the base.
|
|