This page describes how the Gigaset Nx70 devices are provisioned behind the Yeastar S-series. 

For this wiki article, we used:

  • Yeastar S20 software 30.12.0.9
  • Yeastar auto-provisioning app version 1.8.24 (Contains Nx70 HTTPS provisioning)
  • Nx70 software 2.29.0

Yeastar will send a SIP NOTIFY with Event: check-sync;reboot=true to start provisioning, this means that the device is rebooted to trigger the provisioning. The reboot is a Yeastar requirement as Gigaset devices do not need a reboot.

  1. Start with an factory default Nx70 with software 2.29.0 or higher. 
  2. During boot the Nx70 will send a SIP multicast and the device will be visible in the Yeastar Auto Provisioning App.

3. Via the Edit button configure your device

4. Save the configuration

5. Reboot the Nx70

6. The device is configured after reboot


After this, it is not needed to reboot the device anymore, even if it is mentioned in the Yeastar web-interface.

Changes made in Yeastar are triggered via sip-notify and auto-provisioning is started without a reboot.

The following features are supported by the Yeastar Auto Provisioning App.

  • N670 up to 20 handsets
  • N870 up to 50 handsets (N870 can handle 250 but for now limited by Yeastar to 50)
  • LDAP phone-book
  • Call Waiting
  • Voicemail
  • Language
  • Admin Password
  • Tone scheme
  • Time zone
  • NTP server
  • Codecs
  • Firmware update

Add handsets/Accounts

You can configure your handsets by selecting the Extension and define the (internal) LDAP service.

To register the DECT handsets you need to open the Nx70 web-interface and start registration.

Features

  • Call Waiting: Disable / Enable Call Waiting on all DECT handsets
  • Voicemail: Disable / Enable the voicemail service on all DECT handsets
  • Central phonebook: The URL to a central phonebook, this is not the Yeastar (LDAP) phonebook.

Preferences

  • Language: The web-interface language of the system.
  • Admin Password: In the field, configure your admin password. If this is empty, your password entered during Nx70 installation will not be overwritten.
  • Tone Scheme: The tone scheme of the country where you use the system.
  • Primary NTP Server: The NTP server URL you want to use.


Codec

If you disable the G.729 codec you will have more channels on the DECT base. (10 instead of 8)


LDAP

  • Directory name: The name of the phone-book, visible in the DECT handsets,
  • Server Address: The IP address of the Yeastar PBX
  • Server Port: The LDAP server port (389)
  • LDAP Search base (Base DN): dc=pbx,dc=com
  • Username: cn=admin,dc=pbx,dc=com
  • Password: password


Firmware update

Via the firmware update page you can add the latest Nx70 software. (Yeastar require to change the name of the firmware file as no special characters are allowed) You need to start provisioning by entering the Nx70 config in Yeastar and just press save.

Yeastar will send a SIP notify and provisioning/firmware update is then started.

Yeastar offers the possibility to upload your own provisioning template.

Just create an XML provisioning file with all settings and upload via the Yeastar Provisioning App - Upload Files.

Make sure the name of the file is the <MAC address>.xml, see example below.