MCS VoIP GSM gateway
Tested with: Gigaset T300/T500 PRO: Software version 4.6.5.0 MCS VoIP GSM Gateway AS551/2V: Software version 3.04100215 MCS Software version 3.10 is not working, use 3.11 instead.
In this example we started with a default MCS Gateway where we added a SIM card and the PIN code needed to activate the SIM card. Settings in the MCS VoIP GSM Gateway Goto: Configuration - LAN settings - LAN interface mode
The Device should have a fixed IP address. Settings are dependent of the customers network.
|
|
Goto: Configuration - SIP access - General
Change the SIP operation mode to SIP peer |
|
Goto: Configuration - SIP access - Names and passwords
Change the Peer IP address to IP address of the Gigaset T300/T500
|
|
Goto: Configuration - SIP access - DTMF processing
Enable the option: Convert telephone-event from LAN (RFC2833/4733) to DTMF tones to GSM
This will enable you to use DTMF tones when you called a Interactive Voice Response system. |
|
Goto: Configuration - SIP access - Codecs
Check if G711 A-law/PCMA is selected as the first protocol. |
|
Goto: Configuration - Wired Access - Country specific settings Check if the country settings are correct. |
|
Goto: Configuration - GSM settings - GSM channels Change the settings Fix subscriber number, this number is dialled when a GSM call is coming in. In the Gigaset T300/T500, this is the external number that is configured for the MCS Gateway and given to a user or a group. Settings in the Gigaset T300/T500 Goto: Configuration - Lines and Add a new line.
Authentication: No Provider: Create a new provider. Use the above settings.
host: IP address of the MCS VoIP GSM gateway |