Tested with: Gigaset T300/T500 PRO: Software version 22.214.171.124
Fasttel Wizard Elite
Create SIP account in Gigaset T300/T500
Go to: Configuration - Phones - Add additional Telephones
Use the settings like in the example above. Use the Password generator to create a secure Password
Open the Fasttel Wizard Elite door intercom web-interface
Go to Advanced Settings
SIP Server: IP address of the Gigaset T300/T500
Outbound Server: IP address of the Gigaset T300/T500
SIP User ID: Telephone name defined in Gigaset T300/T500
Authenticate ID: Telephone name defined in Gigaset T300/T500
Authenticate Password: Password defined in Gigaset T300/T500
Send DTMF Only activate the option via RTP(RFC2833)
NTP Server IP address of the Gigaset T300/T500
Gigaset User account.
Without a Gigaset user account, the door intercom can be used to dial an internal number. Incoming and Outgoing calls are not possible.
Incoming calls to the door intercom are only possible when the door intercom is assigned to a user.
In the Gigaset T300/T500 Go to: Configuration - Users and create a new user, only to be used for the door intercom (user license)
Programming the Fasttel using DTMF.
Call the extension number of the Doorintercom.
The Fasttel will answer the call and will play DTMF tones.
Then you enter the programming access code: *1996*
But, the Gigaset T300/T500 already uses the code *1 for Call recording. This means when you press *1996*, directly after the *1, the PBX will start recording the call and you will not be able to enter the programming mode. You need to change the *1 code in the Gigaset T300/T500 to an other code.
How to change the *1 code.
- Login the PBX using SSH.
- Go to the directory /home/asterisk
- Open the file features.conf and change the automon => *1 to *4
- Restart the PBX services to activate your chang
blindxfer => NONEXISTINGEXTENSION1 ; Blind transfer, default is #
;disconnect => *0 ; Disconnect
automon => *4 ; One Touch Record
;atxfer => *2 ; Attended transfer