Protalk door intercom

Tested with:

Gigaset T300/T500 PRO: Software version

Protalk Slim IPDP 01C: VoIP version: 1.58 UDV version: 6.0

Create SIP account in Gigaset T300/T500

Go to: Configuration - Phones - Add additional Telephones

Protalk Phone.jpg

Use the settings like in the example above. Always use the Password generator to create a secure Password.

Configure the Protalk door intercom

 Protalk SIP.jpg

SIP proxy server and SIP registrar server = IP address of the Gigaset T300/T500.

Account module Name and Auth. ID = Telephone name in Gigaset T300/T500.

Password = Password in Gigaset T300/T500.

Protalk Number.jpg

Here you can define which number is dialled when the key is pressed, in this example number: 206.

Protalk audio.jpg

Please check if the correct codecs are enabled.

Gigaset User account.

Without a Gigaset user account, the door intercom can be used to dial an internal number. Incoming and Outgoing external calls are not possible.

Incoming calls to the door intercom are only possible when the door intercom is assigned to a user.

In the Gigaset T300/T500 Go to: Configuration - Users and create a new user, only to be used for the door intercom (user license)

Protalk User.jpg

Door intercom video integration with Gigaset T300/T500

This door intercom supports video, the config below is an example how to configure the T300/T500 that will show the door intercom video when receiving a call from the device. The T300/T500 will act as a Proxy for the DE700 and DE900 devices and will provide the Devices with the Video from the door intercom. No special programming in the DE700 and 900 Devices is needed.

Door intercom video integration with the Gigaset DE700 and DE900.

It is also possible to show the door intercom picture on the DE700 and DE900 devices release 02.00.04 and higher. You can use the following features:

  • Doorintercom with Video




ProTalk IP door entry phone with one button and a camera