Auto dial

When the setting is enabled, the phone will dial the number on the display when the specified number of seconds has elapsed since the last digit was typed.

Note: The default setting is off. In admin mode, the setting can be enabled on the Advanced Settings page, Behavior tab, Phone Behavior section,

Redialing

1. Press to show the last numbers dialed, with the very last number at the top.
2. Press  to dial that number or use /  to select a different number and then press

Calling number from call history (missed, received, dialed calls)

1. Press (dialed calls), (received calls), or (missed calls) to open the respective call list.
   
   
2. Use / to select a call.
   
   
3. Press  to dial the number.

Calling number from external directory

1. Open the dial screen to get access to the external directory, if available:
   
   
   1. Lift the handset off the cradle or press the speakerphone key to open the dialing screen (Fig. 1).
      
      
   2. Press the function key underneath to show the list of available directories and call lists (Fig. 2).

c. Select the external directory.

2. Use /  to select a name or enter the first letter(s) of the name on the alphanumeric keypad.

3. Press to dial the number.

Speed dialing

Setting speed dial numbers: See "Speed dial". Mapping a speed dial number onto one of the freely programmable function keys: See chapter "Configuring the function keys", "Example 2, speed dialing".

• Speed dial number on speed dial list
  
  
  • Enter the speed dial number (0-30) or character (#, *) assigned to the phone number you wish to dial.
    
    
  • Press to dial.
    
    
• Speed dial number mapped onto freely programmable function key 1-32: Select the page, if necessary, and press the key.