A number of settings control the appearance of the SmartLabels on the display; they can be set on the phone and on the phone's web interface. There are separate settings for the idle screen, call screens, and other screens. Settings options:

• Default display mode and Alternative display mode. The display will revert to the default mode after the number of seconds set in Back to default display mode have elapsed. The factory defaults are Short label for the Default display mode, and Full label for the Alternative display mode. You can also turn either one or both of them off.

• Alternative display trigger. This setting defines how the appearance of the SmartLabels is switched from the default to the alternative appearance. The default setting is off.
  
  

• Return/Reset to default mode timer after (sec.). This setting defines after how many seconds the appearance of the SmartLabels will automatically return to the default. Valid values are 0 to 360 seconds, the default is 3 seconds. Selecting 0 turns automatic reversion off.
  
  

• Manually returning the display mode to the default: Press . The display mode will also return to the default setting when another key is pressed, e.g., a number key to open the dial screen, the directory key to access the phonebook, etc.
  
  

• Return to label page 1 after (sec)/Return to first page. This setting defines after how many seconds the key page shown on the display, if other than 1, will automatically return to the first page. Valid values are 0 to 1209600 seconds; the default is 0