Introduction

In order to be able to make calls with your telephone over the Internet, you must configure at least one VoIP connection on your telephone. You can configure VoIP connections using the following methods:

Using your telephone's installation wizard on a connected Gigaset handset

You will see the following display:

Before you can use VoIP to phone any other numbers over the Internet, you need the services of a VoIP provider which supports the VoIP SIP standard.

Prerequisite:

You have registered with a VoIP provider (e.g., via your PC) and set up at least one VoIP account (IP account). 

To use VoIP, you now need to enter the access data for your VoIP account. You will receive all the necessary data from your VoIP provider.

  • Press the blinking MWI button to start the Wizard


  • Press the display key Yes if you wish to change the setting for the send and receive connections of the handset with the internal number.
  • Press the display key No if you do not wish to change the setting for this handset. 


The list of receive connections currently assigned is displayed.

  • Press down on the control key to scroll through the list if necessary.
  • Press the display key Select if you wish to change the receive connection setting.
  • Press the display key Save if you wish to save the setting. 

The send connection currently set for the handset is displayed.

  • Press down on the control key to scroll through the list if necessary.
  • Press the display key Select if you wish to change the send connection setting.
  • Press the display key Save if you wish to save the setting.