This page describes the firmware update via auto-provisioning. 

  • Using <firmware> tag
  • Using <firmware_status> tag

Automatic provisioning allows many phones to be set up and updated automatically.

Firmware Update via auto-provisioning

There are several different methods to update firmware through auto-provisioning.

Using <firmware> tag

  • In the setting file,
    • Add / Change <firmware> tag under <phone-settings> tag.

    • This <firmware> tag should be the URL of the firmware executable file. For example,

<?xml version="1.0" encoding="utf-8"?>
 
<settings>
    <phone-settings>
        <update_policy perm="">auto_update</update_policy>
        <firmware perm="">https://profile.gigaset.net/device/P82x/GigasetP82x-10.1.198.162-SIP-r.swu</firmware>
    </phone-settings>
</settings>
  • No need to add or configure the firmware setting configuration file.
  • Reboot the phone or start provisioning manually
  • The phone fetches the phone settings configuration file first. Then the phone fetches the firmware setting configuration file. Finally, the phone fetches the firmware executable file.
  • The phone starts the software update process.

Note:

Do not test the functionality using setup - advanced - update - Upload Setting File Manually. This does not work for firmware update !!!

To test, enter the URL of the provisioning file: setup - advanced - update - Setting URL

Reboot the device, the update starts after the reboot.

After firmware update provisioning, the URL of the firmware is stored in the device:

setup - Software update - Manual Software Update

To start a new software update, the Firmware URL must be changed, only when the Firmware URL is changed the device will download the firmware file.


Using <firmware_status> tag

  • In the setting file,

    • Add / Change <firmware_status> tag under <phone-settings> tag.

    • This <firmware_status> file should be the URL to a different xml file, including firmware information. For example,<?xml version="1.0" encoding="utf-8"?>

<?xml version="1.0" encoding="utf-8" ?>
<settings>
    <phone-settings>
        <update_policy perm="">auto_update</update_policy>
		<!-- URL to the provisioning file below -->
        <firmware_status perm="">http://example.com/firmware.xml</firmware_status>
    </phone-settings>
</settings>


  • In the firmware configuration file,

    • Add/change <firmware> tag under <firmware_settings> tag

    • This <firmware> tag should be the URL of the firmware executable file. For example,

<?xml version="1.0" encoding="utf-8"?>
 
<firmware-settings>
	<!-- URL to the firmware file
	The following placeholders are supported: {mac} / {phone_type} -->
    <firmware perm="">https://profile.gigaset.net/device/P82x/GigasetP82x-10.1.198.162-SIP-r.swu</firmware>
</firmware-settings>


  • Reboot the phone or start provisioning manually.
  • The phone fetches the phone settings configuration file first. Then the phone fetches the firmware setting configuration file. Finally, the phone fetches the firmware executable file.
  • The phone starts the software update process.

Note: If there are both <firmware> and <firmware_status> tags under <phone-settings> tag of the setting file, firmware update follows the URL of <firmware> tag. The URL of <firmware_status> is ignored.