Release 02.00.08

Parameter NamePossible ValuesTypeWebUI availabilityDescription
Network and Connections - LAN Settings
I_VLAN_ACTIVATE0: No 1: YesIntegerYesLAN settings -> Activate VLAN
I_VLAN_ID1~4094IntegerYes

LAN settings -> VLAN ID (1..4094)

NOTE: Available when Activate VLAN (LAN) is TRUE

I_VLAN_PRIORITY_VOICE0~7IntegerYes

LAN settings -> Voice VLAN Priority

NOTE: Available when Activate VLAN (LAN) is TRUE

I_VLAN_PRIORITY_DATA0~7IntegerYes

LAN settings -> Data VLAN Priority

NOTE: Available when Activate VLAN (LAN) is TRUE

I_VLAN_PC_ACTIVATE0: No 1: YesIntegerYes

LAN settings -> Activate VLAN IMPORTANT

NOTE: To enable VLAN on PC port, the VLAN functionality on LAN port must be enabled simultaneously. If VLAN on PC port is enabled but disabled on LAN port in profile, phone will ignore it and keep it disabled on PC port.

I_VLAN_PC_PRIORITY0~7IntegerYes

LAN settings -> Voice VLAN Priority

NOTE: Available when Activate VLAN (PC) is TRUE

I_VLAN_PC_ID1~4094IntegerYes

LAN settings -> VLAN ID (1..4094)

NOTE: Available when Activate VLAN (PC) is TRUE

Network and Connections - Server and Phone Systems
B_HTTP_PROXY_ACTIVATE0: No 1: YesBooleanYesHTTP Proxy -> Enable Proxy
S_HTTP_PROXY_ADDRmax. 64 characters from (0-9,a-z,A-Z,-,.)StringYesHTTP Proxy -> Proxy Server Address
I_HTTP_PROXY_PORT1~65535; default:80IntegerYesHTTP Proxy -> Proxy Server Port
I_HTTP_PORT1~65535; default:80IntegerYesOwn HTTP Server Settings -> HTTP Port
I_HTTPS_PORT1~65535; default:443IntegerYesOwn HTTP Server Settings -> HTTPS Port
I_HTTP_TYPE

1: HTTP

2: HTTPS

3: HTTP + HTTPS

IntegerYesOwn HTTP Server Settings -> HTTP Connection Type
I_HTTP_LOGOUT1~30; default = 10 (minutes)IntegerYesOwn HTTP Server Settings -> Automatic Logout (min)
I_PHONE_SYSTEM

0: None

1: Gigaset T500/T300

2: Standard

3: HiPath

4: Avaya

5: Broadsoft

6: Asterisk

7: Starface

8: Cisco

9: Nexcentrex

10: Sylantro

11: Shortel

12: SARK

13: Intraswitch

14: elmeg hybird

15: sipgate

16: sipgate team

17: ZTE

IntegerYesPhone Systems -> Connected with Phone System
I_CM_AUTO_ANSWER

0: No

1: via Hands-free (default)

2: via Headset

IntegerYesCall manager -> Accept calls via Call Manager directly
I_CM_EXEC_OUT_CALL

0: via Hands-free (default)

1: via Headset

IntegerYesCall manager -> Execute Outgoing Calls
I_CM_ACCEPT_IN_CALL

0: No (default)

1: via Hands-free

2: via Headset

IntegerYesCall manager -> Accept Incoming Calls
S_PBX_BLFLISTmaximum 64 charactersIntegerYesServer and Phone System -> BLF list IP address (URL) - In case of Phone system set to Broadsoft
Network and Connections - QoS Settings
I_SIP_DSC0~63 (default: 34)IntegerYesVoIP Quality of Service (QoS) -> SIP ToS/Diffserv (0..63)
I_RTP_DSC0~63 (default: 46)IntegerYesVoIP Quality of Service (QoS) -> RTP ToS/Diffserv (0..63)
Network and Connections - VoIP Settings
B_UNATTENDED_XFER

0: Early attended (default)

1: Semi-attended

BooleanYesNetwork and Connections -> VoIP Settings -> Call Transfer -> Unattended call transfer
I_HOLD_ON_XFER

0: None

1: for attended call transfer

2: for unattended call transfer (invaid if B_UNATTENDED_XFER = 0)

3: both (invaid if B_UNATTENDED_XFER = 0)

IntegerYesNetwork and Connections -> VoIP Settings -> Call Transfer -> Hold on transfer target
B_RANDOM_PORT

0: No

1: Yes

BooleanYesListen ports for VoIP connections -> Use random ports
S_SIP_PORT1025~65535 StringYes

Telephony -> Connections -> Edit -> Outbound server address

Example: Use Random Ports is FALSE: one single value like "5060" Use Random Ports is TRUE: two values like "5060-5080" to be a valid range; separate by "-" & no SPACE

S_RTP_PORT1025~65535 StringYes

Telephony -> Connections -> Edit -> Domain

Example: Use Random Ports is FALSE: one single value like "5004" Use Random Ports is TRUE: two values like "5004-5027" to be a valid range; separate by "-" & no SPACE; 20 ports at least

B_ICE

0: No

1: Yes

BooleanYesListen ports for VoIP connections -> ICE Enabled
Network and Connections - Security Settings
B_REMOTE_MANAGEMENT0: No 1: Yes (default)BooleanYesRemote Management -> Allow access from other networks to the WEB configurator
I_SIP_TRANSPORT

0: UDP (default)

1: TCP

2: TLS

IntegerYesRemote Management -> Choose Network protocol
B_SRTP

0: No (default)

1: Yes

BooleanYesSecurity Settings -> Secure RTP
B_ACCEPT_NON_SRTP

0: No

1: Yes (default)

BooleanYesSecurity Settings -> Secure RTP
Telephony - Connections
B_ACCEPT_CALL_BY_REG

0: No (default)

1: Yes

BooleanNoB_ACCEPT_CALL_BY_REG is only configurable by auto provision but not visible via phone's UI. When it is 'Yes', phone only accepts calls coming from the SIP server where it is registered. Otherwise, when it is 'No', it accepts calls even not coming from the registered SIP server incl. IP call.
I_OUTGOING_CALL_TIMEOUT40~999 (default: 180 seconds)IntegerNoThe timer in seconds to terminate an outgoing call. By default, it is 180 seconds. It is configurable by auto-provision but not visible in phone's UI.
B_SIP_ACCOUNT_LOCKED_(N)

0: No (default)

1: Yes

BooleanNo

B_SIP_ACCOUNT_LOCKED_(N). This parameter is only configurable by auto provisioning but not visible via phone's UI.

NOTE: Not available on the Web UI

S_VOIP_PROVIDER_(N)max. 35characters from (0-9, a0z, A-Z, -,.)StringYes

Telephony -> Connections -> Edit -> Outbound server address

Example: Use Random Ports is FALSE: one single value like "5060" Use Random Ports is TRUE: two values like "5060-5080" to be a valid range; separate by "-" & no SPACE

B_SIP_ACCOUNT_IS_ACTIVE_(N)

N=1~2 (DE310)

N=1~6 (DE410)

0: Inactive (default)

1: Active

BooleanYesActive
I_DEFAULT_ACCOUNT

0: Connection 1

1: Connection 2

2: Connection 3

11: Connection 12

IntegerYesDefault Send Account (it should not allow the Auto-P system to select the Mobile Connection as the default connection)

S_SIP_ACCOUNT_NAME_(N)

N=1~2 (DE310)

N=1~6 (DE410)

max. 16 charactersStringYes

Telephony -> Connections -> Edit -> Connection Name or Number

S_SH_USER_NAME_LABEL_(N)

N=1~2 (DE310)

N=1~6 (DE410)

max. 32 charactersStringYes

Telephony -> Connections -> Label of Edit -> Authentication Name

S_SH_AUTH_PASS_LABEL_(N)

N=1~2 (DE310)

N=1~6 (DE410)

max. 32 charactersStringYes

Telephony -> Connections -> Label of Edit -> Authentication Password

S_SIP_LOGIN_ID_(N)

N=1~12

max. 32 charactersStringYes

Telephony -> Connections -> Edit -> Authentication Name

S_SIP_PASSWORD_(N)

N=1~2 (DE310)

N=1~6 (DE410)

max. 32 charactersStringYes

Telephony -> Connections -> Edit -> Authentication Password

S_SIP_USER_ID_(N)

N=1~2 (DE310)

N=1~6 (DE410)

max. 32 charactersStringYes

Telephony -> Connections -> Edit -> Username

S_SIP_DISPLAYNAME_(N)

N=1~2 (DE310)

N=1~6 (DE410)

max. 64 charactersStringYes

Telephony -> Connections -> Edit -> Display Name

S_SIP _DOMAIN_(N)

N=1~2 (DE310)

N=1~6 (DE410)

max. 64 characters from (0-9,a-z,A-Z,-,.)StringYes

Telephony -> Connections -> Edit -> Domain

S_SIP_SERVER_(N)

N=1~2 (DE310)

N=1~6 (DE410)

max. 64 characters from (0-9,a-z,A-Z,-,.)StringYes

Telephony -> Connections -> Edit -> Proxy server address

I_SIP_SERVER_PORT_(N)

N=1~2 (DE310)

N=1~6 (DE410)

1025~65535 (default:5060)IntegerYesTelephony -> Connections -> Edit -> Proxy server port

S_SIP_REGISTRAR_(N)

N=1~2 (DE310)

N=1~6 (DE410)

max. 64 characters from (0-9,a-z,A-Z,-,.)StringYes

Telephony -> Connections -> Edit -> Registration server

I_SIP_REGISTRAR_PORT_(N)

N=1~2 (DE310)

N=1~6 (DE410)

1025~65535 (default:5060)IntegerYesTelephony -> Connections -> Edit -> Registration server port

I_RE_REGISTRATION_TIMER_(N)

N=1~2 (DE310)

N=1~6 (DE410)

0~9999 (default: 120)IntegerYesTelephony -> Connections -> Edit -> Registration refresh time sec

B_SIP_USE_STUN_(N)

N=1~2 (DE310)

N=1~6 (DE410)

0: No (default)

1: Yes

BooleanYesTelephony -> Connections -> Edit -> STUN enabled

S_STUN_SERVER_(N)

N=1~2 (DE310)

N=1~6 (DE410)

max. 64 characters from (0-9,a-z,A-Z,-,.)StringYesTelephony -> Connections -> Edit -> STUN server address

I_STUN_SERVER_PORT_(N)

N=1~2 (DE310)

N=1~6 (DE410)

1025~65535 (default:3478)StringYesTelephony -> Connections -> Edit -> STUN server port

I_RE_STUN_TIMER_(N)

N=1~2 (DE310)

N=1~6 (DE410)

0~9999 (default: 120)IntegerYesTelephony -> Connections -> Edit -> STUN refresh time sec

I_NAT_REFRESH_TIME_(N)

N=1~2 (DE310)

N=1~6 (DE410)

0~9999 (default: 120)IntegerYesTelephony -> Connections -> Edit -> NAT refresh time sec

I_OUTBOUND_PROXY_MODE_(N)

N=1~2 (DE310)

N=1~6 (DE410)

0: Never (default)

1: Always

2: Automatic

IntegerYesTelephony -> Connections -> Edit -> Outbound proxy mode

S_OUTBOUND_PROXY_(N)

N=1~2 (DE310)

N=1~6 (DE410)

max. 64 characters from (0-9,a-z,A-Z,-,.)StringYes

Telephony -> Connections -> Edit -> Outbound server address

Example: Use Random Ports is FALSE: one single value like "5060" Use Random Ports is TRUE: two values like "5060-5080" to be a valid range; separate by "-" & no SPACE

I_OUTBOUND_PROXY_PORT_(N)

N=1~12

1025~65535 (default:5060)IntegerYesTelephony -> Connections -> dit -> Outbound proxy port

B_AUTOMATIC_DTMF_(N)

N=1~12

0: No 1: YesBooleanYesTelephony -> Connections -> Edit -> Automatic negotiation of DTMF transmission

I_DTMF_TX_MODE_BITS_(N)

N=1~2 (DE310)

N=1~6 (DE410)

1: Audio

2: RFC 2833

3: Audio + RFC2833

4: SIP Info

5: Audio + SIP Info

6: RFC2833 + SIP Info

7: Audio + RFC2833 + SIP Info

IntegerYesTelephony -> Connections -> Edit -> Send settings of DTMF transmission
I_DTMF_TX_RTP_PAYLOAD_TYPE_(N)

N=1~2 (DE310)

N=1~6 (DE410)

96~127 (default=101)IntegerNoPayload Type
B_MISSED_ACCEPTED_COUNT_(N)

N=1~2 (DE310)

N=1~6 (DE410)

0: No 1: Yes (default)BooleanYesTelephony -> Connections -> Edit -> Missed/accepted calls count

I_CALL_WAITING_(N)

N=1~2 (DE310)

N=1~6 (DE410)

0:No

1: only signalling at display

2: only one beep

3: Beep all 4 sec. (default)

4: Beep all 10 sec.

5: Beep all 20 sec.

IntegerYesTelephony -> Connections -> Edit -> Call Waiting

I_RINGER_MELODIES_(N)

N=0, N=2 (DE310)

N=0, N=2~6 (DE410)

0: Individual (only available when N is equal to "0")

1~15: 15 selectable types as present in MMI

1: 01_call1
2: 02_call2
3: 03_call3
4: 04_call4
5: 05_Gigaset
6: 06_Alert
7: 07_Down
8: 08_Memo
9: 09_Pick it
10: 10_Blink
11: 11_First_aid2
12: 12_First_aid3
13: 13_Keypad
14: 14_Tone one
15: 15_beep

IntegerYesTelephony -> Connections -> Edit -> Melodies

I_RINGER_MELODIES_EC_(N)

N=0, N=2 (DE310)

N=0, N=2~6 (DE410)

0: Individual (only available when N is equal to "0")

1~15: 15 selectable types as present in MMI

1: 01_call1
2: 02_call2
3: 03_call3
4: 04_call4
5: 05_Gigaset
6: 06_Alert
7: 07_Down
8: 08_Memo
9: 09_Pick it
10: 10_Blink
11: 11_First_aid2
12: 12_First_aid3
13: 13_Keypad
14: 14_Tone one
15: 15_beep

IntegerYesTelephony -> Connections -> Edit -> Melody - External Call

I_RINGER_MELODIES_IC_(N)

N=0, N=2 (DE310)

N=0, N=2~6 (DE410)

0: Individual (only available when N is equal to "0")

1~15: 15 selectable types as present in MMI

1: 01_call1
2: 02_call2
3: 03_call3
4: 04_call4
5: 05_Gigaset
6: 06_Alert
7: 07_Down
8: 08_Memo
9: 09_Pick it
10: 10_Blink
11: 11_First_aid2
12: 12_First_aid3
13: 13_Keypad
14: 14_Tone one
15: 15_beep

IntegerYesTelephony -> Connections -> Edit -> Melody - Internal Call

I_RINGER_MELODIES_GC_(N)

N=0, N=2 (DE310)

N=0, N=2~6 (DE410)

1~15: 15 selectable types as present in MMI

1: 01_call1
2: 02_call2
3: 03_call3
4: 04_call4
5: 05_Gigaset
6: 06_Alert
7: 07_Down
8: 08_Memo
9: 09_Pick it
10: 10_Blink
11: 11_First_aid2
12: 12_First_aid3
13: 13_Keypad
14: 14_Tone one
15: 15_beep

IntegerYesTelephony -> Connections -> Edit -> Melody - Group Call

B_SHARED_LINE_(N)

N=1~2 (DE310)

N=1~6 (DE410)

0: No (default)

1: Yes **for Broadsoft only**

BooleanYesTelephony -> Connections -> Edit -> Shared Line

I_SIP_ANONYMOUS_PRIVACY_(N)

N=1~2 (DE310)

N=1~6 (DE410)

0x00 => PRIVACY_NONE;

0x01 => PRIVACY_USER;

0x02 => PRIVACY_NET_HEADER;

0x04 => PRIVACY_NET_SESSION;

0x08 => PRIVACY_NET_USER;

0x10 => PRIVACY_NET_NONE;

0x20 => PRIVACY_NET_CRITICAL;

0x40 => PRIVACY_NET_ID; (default)

IntegerNoNOTE: Content of the Privacy Header can be constructed by 1~6 from the six valid items. For example, it can be 0x63. It indicates that the content of Privacy Header is "Privacy: id,critical,header" and the content of the From header must be modified as "anonymous".
Telephony - Audio
I_RTP_PACKET_SIZE

2: 20ms (default)

3: 30ms **One setting only for all connections** **

1 & 4~6 are reserved for other values that are not available in this hardware platform.

IntegerYesTelephony -> Audio -> Packed time for RTP packages [ms]
I_VOICE_QUALITY_(N)

0: Optimised for high bandwidth

1: Optimised for low bandwidth

2: Own Codec preference

IntegerYesTelephony -> Audio -> Voice Quality
S_SIP_PREFERRED_VOCODER_(N)

0: G711ulaw

1: G711alaw

2: G722

3: G726

4. iLBC

5: G729A

StringYes

see WEB-GUI >= V22 set "own CODEC preference" as default!

Example: 0,1,2,3,4,5 for all codecs (separate by COMMA sign; no SPACE between each character; priority: left > right) NOTE: This parameter is ignored if I_VOICE_QUALITY is 0 or 1; EMPTY means "don't change existing settings" if I_VOICE_QUALITY is 2.

B_SILENCE_SUPPRESSION

0: No (default)

1: Yes **One setting only for all connections**

BooleanYesTelephony -> Audio -> Silence Suppression
Telephony - Call Divert
I_NO_ANSWER_TIME1~600; default = 15 secIntegerYesTelephony -> Call Divert -> Waiting time for no answer
I_CF_TYPE_(N)

0: Off

1: All Calls

2: No Answer

3: When Busy

IntegerYesTelephony -> Call Divert -> When
S_CF_NUMBER_(N)max. 63 charactersStringYesTelephony -> Call Divert -> Phone Number
Telephony - Local Settings
I_AREA_COUNTRY

0: Albania

1: Argentina

81: Montenegro

82: Other Country

IntegerYesTelephony -> Local Settings -> Area Codes -> Country
S_AREA_INTERL_PREXmax. 4 phonedigits (0-9,*,#,R,P)StringYesTelephony -> Local Settings -> Area Codes -> International Prefix
S_AREA_INTERL_AREAmax. 4 phonedigits (0-9,*,#,R,P)StringYesTelephony -> Local Settings -> Area Codes -> International Area Code
S_AREA_LOCAL_PREXmax. 4 phonedigits (0-9,*,#,R,P)StringYesTelephony -> Local Settings -> Area Codes -> Local Prefix
S_AREA_LOCAL_AREAmax. 8 phonedigits (0-9,*,#,R,P)StringYesTelephony -> Local Settings -> Area Codes -> Local Area Code
I_TONE_SCHEME

2: Austria

3: Canada

4:Czech Republic

5:Denmark

6 Egypt

7 Finland

8 France

9 Germany

10 Greece

11 Netherlands

12 Poland

13 Portugal

14 Romania

15 RSA - South Africa

16 Russian Federation

17 Saudi Arabia

18 Slovakia

19 Spain

20 Sweden

21 Switzerland

22 United Arab Emirates

23 United Kingdom of Great Britain

24 USA

IntegerYesTelephony -> Local Settings -> Ring Tones -> Tone Scheme
Telephony - Dialling Plans
S_DIAL_NUMBER_(N)N=1~30StringYesTelephony -> Dialling Plans -> Phone Number
B_DIAL_AREA_(N)

0: No

1: Yes N=0~N; N is not defined yet

BooleanYesTelephony -> Dialling Plans -> Use Area Codes
I_DIAL_CONNECTION_(N)

0: Connection 1

1: Connection 2

2: Connection 3

11: Connection 12

IntegerYesTelephony -> Dialling Plans -> Connection
S_DIAL_COMMENT_(N) StringYesTelephony -> Dialling Plans -> Comment
B_DIAL_ACTIVE_(N)

0: Inactive

1: Active

BooleanYesTelephony -> Dialling Plans -> Active
S_ACCESS_CODEmax. 4 digits (0, 1~9; numeric only)StringYesTelephony -> Dialling Plan -> Access Code
I_USE_ACCESS_CODE

0: None (default)

1: Directory & Call Lists

2: All Allows 0~63; constructed by the 6 specified numbers of the 6 options. 32: outgoing calls list dialing 16: incoming calls list dialing 8: user defined net directory dialing 4: local directory dialing 2: public net directory dialing 1: manual dialing E.g. "outgoing calls list dialing + user defined net directory dialing + local directory dialing" = 32+8+4 = 44; 0 means no option is selected

IntegerYesTelephony -> Dialling Plan -> Access Code
Telephony - Do Not Disturb
B_DND_LIST_ACTIVATE

0: No (default)

1: Yes

BooleanYesTelephony -> Do Not Disturb -> Activate DND List
S_DND_NAME_(N)max. 32 characters; N=1~ 50StringYesTelephony -> Do Not Disturb -> Name
S_DND_NUMBER_(N)max. 32 characters; N=1~ 50StringYesTelephony -> Do Not Disturb -> Number
B_ANON_CALL

0: No (default)

1: Yes

BooleanYesTelephony -> Do Not Disturb -> Block anonymous caller
Telephony - Voice Mail Services
S_VOIP_NET_AM_NUMBER_(N) / (N)=1~12max. 32 phonedigits (0-9,*,#,R,P) StringYesMailbox Number
B_VOIP_NET_AM_ENABLED_(N)0: Inactive 1: ActiveBooleanYes

Active

NOTE: The Voice Mail account must not be empty if it is enabled (i.e. B_VOIP_NET_AM_ENABLED_(N) = 1: Active).

Messaging - MWI Light
B_MWI_MISSED

0: No (default)

1: Yes

BooleanYesSetting -> Messaging -> MWI Light -> Missed Call
B_MWI_EMAIL

0: No (default)

1: Yes

BooleanYesSetting -> Messaging -> MWI Light -> Email
B_MWI_VM

0: No (default)

1: Yes

BooleanYesSetting -> Messaging -> MWI Light -> Voice Mail
B_MWI_ALARM

0: No

1: Yes (default)

BooleanYesSetting -> Messaging -> MWI Light -> Missed Alarms
B_MWI_NOTIFICATION

0: Beep

1: Silent (default)

BooleanYesSetting -> Messaging -> MWI Light -> MWI Notification
Messaging - SIP Messages
B_SMS_SHOW

0: No
1: Yes (default)

BooleanYesSettings -> Messaging -> SIP Messages -> Show messages on phone
B_SMS_CLEAR_BY_BACK

0: No
1: Yes (default)
NOTE: Not available when B_SMS_SHOW is No.

BooleanYesSettings -> Messaging -> SIP Messages -> Clear message with End/Back key
Services - Door Interphone
S_DOOR_NAME_(N)max. 32 charactersStringYesServices -> Door Interphone -> Name
S_DOOR_ID_(N)max. 32 charactersStringYesServices -> Door Interphone -> SIP ID
S_DOOR_CODE_(N)max. 16 charactersStringYesServices -> Door Interphone -> DTMF Code
S_DOOR_URL_(N)max. No Limit characters;StringYes

Services -> Door Interphone -> Camera (URL)

NOTE: Must be started with "http://" and is valid URL

I_DOOR_RATE_(N)200~30000; default = 500 msIntegerYesServices -> Door Interphone -> Reload Rate
Services - Online Directory
B_SIPID_IN_REQ0: No (default) 1: YesBooleanNoNot configurable via Web UI or MMI
B_NETDIR_(N)

0: No (default)

1: Yes

N=1, 2, 5 &6; reference to the above list

## IMPORTANT NOTE ## When B_NETDIR_6 is set as "Yes", at least one of the sub-pages (i.e. White, Yellow and Private pages) must be configured and enabled. Otherwise, B_NETDIR_6 = Yes will be treated as invalid setting.

BooleanYesServices -> Online Directory -> Online Directory -> Select
I_NETDIR_AUTO_LOOKUP

1: TelSearch (Ch)

2: Klick-Tel (GER)

3: EDSA De Gule Sider (Dk)

4: Telefoongids (NDL)

5: Eniro (No)

6: User Defined

IntegerYes

Services -> Online Directory -> Online Directory -> Automatic Lookup

NOTE: Only availavle when the corresponding net directory (B_NETDIR_(N)) is selected; otherwise, phone will ignore the setting here.

S_NETDIR_NEW_LABELmax. 16 charactersStringYesServices -> Online Directory -> Setting for additional provider -> Provider Name
S_NETDIR_NEW_ADDRmax. 64 characters from (0-9,a-z,A-Z,-,.)StringYesServices -> Online Directory -> Setting for additional provider -> Server Address
S_NETDIR_NEW_NAMEmax. 64 charactersStringYesServices -> Online Directory -> Setting for additional provider -> Authentication Name
S_NETDIR_NEW_PASSWmax. 64 charactersStringYesServices -> Online Directory -> Setting for additional provider -> Authentication Password
B_NETDIR_NEW_VIEW

0: Public directory (default)

1: Local directory

BooleanYesServices -> Online Directory -> Setting for additional provider -> Search handling and view as
S_NETDIR_WHITE_NAMEmax. 16 charactersStringYesServices -> Online Directory -> White Pages -> Name of directory
B_NETDIR_WHITE_ACTIVATE

0: No (default)

1: Yes

BooleanYesServices -> Online Directory -> White Pages -> Enable "White Pages"
B_NETDIR_WHITE_LOOKUP

0: No (default)

1: Yes

BooleanNoWhite Pages -> Enable automatic look-up; Removed from Web UI
S_NETDIR_YELLOW_NAMEmax. 16 charactersStringYesServices -> Online Directory -> Yellow Pages -> Name of directory
B_NETDIR_YELLOW_ACTIVATE

0: No (default)

1: Yes

BooleanYesServices -> Online Directory -> Yellow Pages -> Enable "Yellow Pages"
B_NETDIR_YELLOW_LOOKUP

0: No (default)

1: Yes

BooleanNoYellow Pages -> Enable automatic look-up; Removed from Web UI
S_NETDIR_PRIV_NAMEmax. 16 charactersStringYesServices -> Online Directory -> Private Pages -> Name of directory
B_NETDIR_PRIV_ACTIVATE

0: No (default)

1: Yes

BooleanYesServices -> Online Directory -> Private Pages -> Enable "Private Pages"
B_NETDIR_PRIV_LOOKUP

0: No (default)

1: Yes

BooleanYesPrivate NetDirectory -> Enable automatic look-up; Removed from Web UI
Services - LDAP
S_LDAP_NAMEmax. 16 charactersStringYesServices -> LDAP -> Name of Directory
I_LDAP_MAX_HITS1~250; (default: 50)IntegerYesServices -> LDAP -> Max. Hits
B_LDAP_ENABLED

0: No (default)

1: Yes

BooleanYesServices -> LDAP-> Enable phone book
B_LDAP_CALL_LOOKUP

0: No (default)

1: Yes

BooleanYesServices -> LDAP -> LDAP lookup for incomingcalls
S_LDAP_IPmax. 64 characters; Must be valid URLStringYesServices -> LDAP -> Server Address
I_LDAP_PORT1~65535IntegerYesServices -> LDAP -> Server Port
S_LDAP_SEARCH_BASEmax. 64 charactersStringYesServices -> LDAP -> LDAP Search Base
S_LDAP_AUTH_NAMEmax. 64 charactersStringYesServices -> LDAP -> Username
S_LDAP_AUTH_PASSWORDmax. 64 charactersStringYesServices -> LDAP -> Password
S_LDAP_NAME_FILTERmax. 64 charactersStringYesServices -> LDAP -> LDAP Name Filter
S_LDAP_NAME_ATTRIBmax. 64 charactersStringYesServices -> LDAP -> LDAP Name Attributes
S_LDAP_NUM_FILTERmax. 64 charactersStringYesServices -> LDAP -> LDAP Number Filter
S_LDAP_NUM_ATTRIBmax. 64 charactersStringYesServices -> LDAP -> LDAP Number Attributes
S_LDAP_DISPLAY_NAME StringYesServices -> LDAP ->
S_LDAP_ATTRIB_FNmax. 64 characters; default = givenNameIntegerYesServices -> LDAP -> First Name
S_LDAP_ATTRIB_SNmax. 64 characters; default = snIntegerYesServices -> LDAP -> Surname
S_LDAP_ATTRIB_HOMEmax. 64 characters; default = homePhoneIntegerYesServices -> LDAP -> Phone (Home)
S_LDAP_ATTRIB_WORKmax. 64 characters; default = telephoneNumberIntegerYesServices -> LDAP -> Phone (Work)
S_LDAP_ATTRIB_MOBILEmax. 64 characters; default = mobileIntegerYesServices -> LDAP -> Phone (Mobile)
S_LDAP_ATTRIB_EMAILmax. 64 characters; default = mailIntegerYesServices -> LDAP -> Email
S_LDAP_ATTRIB_FAXmax. 64 characters; default = facsimileTelephoneNumberIntegerYesServices -> LDAP -> Fax
S_LDAP_ATTRIB_TITLEmax. 64 characters; default = titleIntegerYesServices -> LDAP -> Job Title
S_LDAP_ATTRIB_COMPANYmax. 64 characters; default = companyIntegerYesServices -> LDAP -> Company
S_LDAP_ATTRIB_STREETmax. 64 characters; default = streetIntegerYesServices -> LDAP -> Street
S_LDAP_ATTRIB_CITYmax. 64 characters; default = l (lower case of L)IntegerYesServices -> LDAP -> City
S_LDAP_ATTRIB_ZIPmax. 64 characters; default = postalCodeIntegerYesServices -> LDAP -> Zip
S_LDAP_ATTRIB_COUNTRYmax. 64 characters; default = friendlyCountryNameIntegerYesServices -> LDAP -> Country
S_LDAP_ATTRIB_NEWmax. 64 characters; default = <empty>IntegerYesServices -> LDAP -> Additional
Function Keys
I_KEY_LIGHT

0: Off

1: Always on

2: On in Use (default)

IntegerYesFuction Keys -> Key Light
I_DIR_KEY

0: Local Directoty (default)

 1: LDAP

2: USB Directory

3: CH-[tel.search.ch]

4: DE-KlickTel

5: DK-De Gule Sider

6: NL-Telefoongids

7: NO-Eniro

9: user-defined white page

10: user-defined yellow page

11: user-defined private page

IntegerYesFunction Keys -> Directory Key Note: The behavior of the user-defined directory is different from the five default ones. For the five deafult online-dirs, it just needs to show the top-level directory name. But, as Gigaset requested, it needs to show the sub-level directory name of the user-defined dir., "white page", "yellow page" of the user-defined dir.
S_SPEED_DIAL_NUM_(N)For Newton/Kelvin only max. 64 characters N=1~9 (i.e. the numeric key 1~9 on keypad)StringYesFunction Keys -> Speed Dial (for Newton/Kelvin only)
I_PROG_MWI

0: default function

1: DTMF code

IntegerYesFunction Keys -> Pre-programmed Keys -> MWI -> Function
S_PROG_MWI_CODEmax. 64 characters; allows 0, 1~9, * and #StringYesFunction Keys -> Pre-programmed Keys -> MWI -> DTMF Code
I_PROG_REC

0: default function

1: DTMF code

IntegerYesFunction Keys -> Pre-programmed Keys -> REC -> Function
S_PROG_REC_CODEmax. 64 characters; allows 0, 1~9, * and #StringYesFunction Keys -> Pre-programmed Keys -> REC -> DTMF Code
I_PROG_DND

0: default function

1: DTMF code

IntegerYesFunction Keys -> Pre-programmed Keys -> DND -> Function
S_PROG_DND_CODEmax. 64 characters; allows 0, 1~9, * and #StringYesFunction Keys -> Pre-programmed Keys -> DND -> DTMF Code
I_PROG_HOLD

0: default function

1: DTMF code

IntegerYesFunction Keys -> Pre-programmed Keys -> HOLD -> Function
S_PROG_HOLD_CODEmax. 64 characters; allows 0, 1~9, * and #StringYesFunction Keys -> Pre-programmed Keys -> HOLD -> DTMF Code
I_PROG_XFER

0: default function

1: DTMF code

IntegerYesFunction Keys -> Pre-programmed Keys -> XFER -> Function
S_PROG_XFER_CODEmax. 64 characters; allows 0, 1~9, * and #StringYesFunction Keys -> Pre-programmed Keys -> XFER -> DTMF Code
I_PROG_CONF

0: default function

1: DTMF code

IntegerYesFunction Keys -> Pre-programmed Keys -> CONF -> Function
S_PROG_CONF_CODEmax. 64 characters; allows 0, 1~9, * and #IntegerYesFunction Keys -> Pre-programmed Keys -> CONF -> DTMF Code
I_FUNCTION_KEY_TYPE_(X)

0: Line

1: Shared Line

2: Park + Orbit

3: SpeedDial

4: Presence

5: BLF

6: XML-Content

7: InfoService

8: Call Divert

9: DTMF

10: Menu - Next call anonymous

11: Menu - Call divert

12: Menu - Resource Directory

13: Menu - Internet Radio

14: Open Listening

255: None

StringYesFunction Keys -> Program Keys -> Edit -> Function Select
I_FUNCTION_KEY_CONNECTION_KEY_(X)

0: Connection 1

1: Connection 2

2: Connection 3

11: Connection 12

IntegerYesFunction Keys -> Program Keys -> Edit -> Connection Name
S_FUNCTION_KEY_NUM_(X)max. 64 charactersStringYesFunction Keys -> Program Keys -> Edit -> Phone Number
S_DIRECTED_PICKUP_CODE (X)max. 4 characters: 0, 1~9, * and # (default = **)StringYesFunction Keys -> Program Keys -> Edit -> Directed Call Pickup Code
System - Date and Time
B_AUTO_SYNC_TIME

0: No

1: Yes (default)

BooleanYesSystem -> Date and Time -> Time -> Automatic adjustment of System Time with Time Server
S_TIME_NTP_SERVERmax. 64 characters from (0-9,a-z,A-Z,-,.)StringYesSystem -> Date and Time -> Time Server NOTE: Availavle when Automatic adjustment of System Time with Time Server is TRUE
I_TIME_ZONE

0: (GMT-12:00) Enewetak, Kwajalein

1: (GMT-11:00) Midway Island, Samoa

2: (GMT-10:00) Hawaii

3: (GMT-09:00) Alaska

4: (GMT-08:00) Pacific Time

5: (GMT-07:00) Arizona, Mountain Time

6: (GMT-06:00) Central Time, Mexico City

7: (GMT-05:00) Eastern Time, Indiana

8: (GMT-04:00) Atlantic Time

9: (GMT-03:00) Brasilia, Buenos Aires

10: (GMT-02:00) Mid-Atlantic

11: (GMT-01:00) Azores, Cape Verde Is.

12: (GMT) GMT, Dublin, London

13: (GMT+01:00) Amsterdam, Berlin, Rome

14: (GMT+02:00) Athens, Cairo, Israel

15: (GMT+03:00) Baghdad, Kuwait, Moscow

16: (GMT+04:00) Abu Dhabi, Muscat

17: (GMT+05:00) Islamabad, Karachi

18: (GMT+06:00) Dhaka, Colombo

19: (GMT+07:00) Bangkok, Hanoi, Jakarta

20: (GMT+08:00) Beijing, Singapore, Taipei

21: (GMT+09:00) Osaka, Tokyo, Seoul

22: (GMT+10:00) Melbourne, Sydney, Guam

23: (GMT+11:00) Magadan, Soloman Is.

24: (GMT+12:00) Auckland, Wellington

25: (GMT+13:00) Nukualofa

IntegerYesSystem -> Date and Time -> Time Zone
B_DAYLIGHT_SAVING

0: No (default)

1: Yes

BooleanYesSettings -> System -> Time -> Automatically adjust clock to summer-time changes
System - Security
S_ADMIN_PASSWORDmax. 16 charactersStringYesSystem -> Security -> Web Configurator
S_USER_PASSWORDmax. 16 charactersStringYesSystem -> Security -> Web Configurator (Administrator)
S_PHONE_PINmax. 4 digitsStringYesSystem -> Security -> Phone PIN
System - Display
I_BRIGHTNESS

For DE900/DE700: 1~7; default = 7

For DE410/DE310: 1~3; default = 2

IntegerYesSystem -> Display -> Backlight -> Brightness
B_TIME_CONTROL_BACKLIGHT

0: Off (default)

1: On

BooleanYesSystem -> Display -> Backlight -> Time Control
I_CONTRASTFor DE410/DE310 only: 1~6; default is 4IntegerYesIn MMI only
I_DEVICE_LANGUAGE

2: Deutsch

3: English

4: Espanol

5: Portugues

7: Italiano

9: Francais

10: Nederlands

11: Norsk

12: Dansk

13: Svenska

14: Suomi

15: Cesky

16: Turkce

17: Polski

23: Russkij

24: Ellinika

25: Magyar

26: Hrvatski

27: Slovenscina

28: Romana

IntegerYesSystem -> Display -> Display Formats -> Device Language
I_WEB_LANGUAGE

2: Deutsch

3: English

4: Espanol

5: Portugues

7: Italiano

9: Francais

10: Nederlands

11: Norsk

12: Dansk

13: Svenska

14: Suomi

15: Cesky

16: Turkce

17: Polski

23: Russkij

24: Ellinika

25: Magyar

26: Hrvatski

27: Slovenscina

28: Romana

IntegerYesSystem -> Display -> Display Formats -> Web Interface Language
I_DATE_FORMAT

0: dd.mm.yyyy (default)

1: mm.dd.yyyy

IntegerYesSystem -> Display -> Display Formats-> Date Format
B_24_HOURS

0: off

1: on (default)

BooleanYesSystem -> Display -> Display Formats-> 24-hour clock
B_NAME_SORT

0: First Name

1: Surname

BooleanYesSystem -> Display -> Display Formats-> Sort Criteria Directory
System - Firmware Update
S_DATA_SERVER

max. 255 characters from (0-9,a-z,A-Z,-,.)

default = profile.gigaset.net/device

StringYesSystem -> Firmware Update -> Data Server
S_SPECIAL_DATA_SRVmax. 255 characters from (0-9,a-z,A-Z,-,.)StringYes

Only provisionable but not user configurable

By default is empty - it must be complete/proper URL such as http://domain/path/020004.img. The f/w file name must be XXXXXX.img, e.g. 020004.img, for 02.00.04. XXXXXX is equal to the data in S_SPECIAL_FW_VER.

S_SPECIAL_FW_VERmax. 6 characters from in decimal number (0~9)StringNo

Only provisionable but not user configurable

for example, 020004 for version 02.00.04;

By default is empty

B_AUTO_FIRMWARECHECK_ACTIVATE

0: No (default)

1: Yes

BooleanYesSystem -> Firmware Update -> Automatic check for software updates
B_AUTO_PROFILECHECK_ACTIVATE

0: No

1: Yes (default)

BooleanYesSystem -> Firmware Update -> Automatic check for profile updates
I_CHECK_UPDATE_METHOD

0: To check update once at a random time per day

1: To check update at a specified time (once per day)

2: To check update in the time interval (multiple times per day)

IntegerYesTo specify the timing to check update
I_CHECK_UPDATE_TIME1~1440; minutes after 00:00 in one single day; IntegerYes

To specify a time to check update

1440 means 00:00 (but not 00:00 of the next day)

NOTE: it is only available if I_CHECK_UPDATE_METHOD is equal to "1".

I_CHECK_UPDATE_INT15~720; time interval in minutes starting at 00:00 IntegerYes

To specify a time interval to check update periodically

NOTE: it is only available if I_CHECK_UPDATE_METHOD is equal to "2".

MMI in the phone - Audio settings
I_RINGER_VOLUME

0: Silence

1~10: 10 steps of volume for Hawking/Feynman

(1~5: 5 steps of volume for Newton/Kelvin)

Integer Settings -> Audio Settings -> Ringer Settings -> Volume
B_ANON_CALL_SILENCING0: Off (default) 1: OnBoolean Settings -> Audio Settings -> Ringer Settings -> Anon. Call Silencing
B_KEY_TONES0: Off 1: On (default)Boolean Settings -> Audio Settings -> Advisory Tones -> Key Tones
B_CONFIRMATIONS0: Off 1: On (default)Boolean Settings -> Audio Settings -> Advisory Tones -> Confirmations
MMI in the phone - Menu settings
B_SELECT_SERVICE_ENABLE0: Off 1: On (default)Boolean 

Possibility to disable the phone menu: Select Services.

Only possible via auto-provisioning.

Broadsoft Settings
S_XSP_HOSTURL to Broadsoft XSI server. Format: http://<providerURL>String 

Telephony-> Connections -> Edit ->

NOTE: Only available when Broadsoft is selected as PBX: I_PHONE_SYSTEM=5

S_XSP_USERBroadsoft XSI UsernameString 

Telephony -> Connections -> Edit ->

NOTE: Only available when Broadsoft is selected as PBX: I_PHONE_SYSTEM=5

S_XSP_PWBroadsoft XSI PasswordString 

Telephony -> Connections -> Edit ->

NOTE: Only available when Broadsoft is selected as PBX: I_PHONE_SYSTEM=5

     
T300/T500 Settings
S_PBX_ENTITY_CFU(no default, will be set by PBX)String Gigaset T500: Dialog Entity for PBX CFU
S_PBX_CFU_ACTIVATEdefault: *21*<NUMBER> # NOTE: The part <NUMBER> is unchangable in the whole string provided by provisioning server. When phone originates INVITE to activate this feature, the part <NUMBER> can be replaced by a real number (i.e. in Call Divert).String Gigaset T500: dial code for activating CFU (call forwarding unconditional)
S_PBX_CFU_DEACTIVATEdefault: #21#String Gigaset T500: dial code for deactivating CFU
S_PBX_ENTITY_CFNR(no default, will be set by PBX)String Gigaset T500: Dialog Entity for PBX CFNR
S_PBX_CFNR_ACTIVATEdefault: *61*<NUMBER># NOTE: see item 10String Gigaset T500: dial code for activating CFNR (call forwarding on no reply)
S_PBX_CFNR_DEACTIVATEdefault: #61#String Gigaset T500: dial code for deactivating CFNR
S_PBX_ENTITY_CFB(no default, will be set by PBX)String Gigaset T500: Dialog Entity for PBX CFB
S_PBX_CFB_ACTIVATEdefault: *67*<NUMBER># NOTE: see item 10String Gigaset T500: dial code for activating CFB (call forwarding on busy)
S_PBX_CFB_DEACTIVATEdefault: #67#String Gigaset T500: dial code for deactivating CFB
S_PBX_ENTITY_CCBS(no default, will be set by PBX)String Gigaset T500: Dialog Entity for PBX CCBS
S_PBX_CCBS_ACTIVATEdefault: *37#String Gigaset T500: dial code for activating CCBS (completion of calls to busy subscriber)
S_PBX_CCBS_DEACTIVATEdefault: #37#String Gigaset T500: dial code for deactivating CCBS
S_PBX_ENTITY_DND(no default, will be set by PBX)String Gigaset T500: Dialog Entity for PBX DND
S_PBX_DND_ACTIVATEdefault: *26#String Gigaset T500: dial code for activating DND (do not disturb)
S_PBX_DND_DEACTIVATEdefault: #26#String Gigaset T500: dial code for deactivating DND