Open the web configuration interface by pointing a browser to the IP Address of the Beronet gateway and login .(The default credentials for the Beronet web interface are Username: admin, Password: admin
Setup the following parameters:
Name = PRI E1
Server Address ( IP T440 or T640 / default 192.168.0.50) = 192.168.0.50
Due to new IPBX firmware uses PJSIP, target port has to be defined after server address : 192.168.0.50:5070 |
User (Username to register T440 or T640 to Beronetgatway) = beronetpri
Secret (Pwassword to register T440 or T640 to Beronetgatway) =beronetsecret
Inbound DIDs
For incoming calls, we will route the complete number to the Inbound routes (e.g.08912345621).
Inbound caller ID
For incoming calls, we will add an additional 0 in front of the external number of the caller, in order to use the callback-feature of the phone (e.g. 008912345678). During the call-setup the additional 0 will be automatically removed.
Gateways
This field will be empty when you create this Gateway group. It will show later the assigned SIP gateways
Create a new Sip gateway
The SIP gateway contains all necessary data for the registration and dial command and how the number is delivered to/from the provider.
Registra
IP Address of Beronet gateway
User
User (Step 4 Beronet gateway) = beronetpri
Password
Password (Step 4 Beronet gateway = beronetsecret
Dial command
The dial command is the command which is used in the asterisk software. The term {number:1} means, that at the dialled number (e.g. 0089987654321) the first digit is removed. If you don't use a line access code (in most cases '0' is used), you have to remove the ':1' ! ! !
Group
Select here the previously created gateway group.
Update remote party ID (CLIP)
To display the correct extension at external parties, you have to use the P-Asserted-Identity (PAI) setting. If this is not selected, only the head-number (e.g.0891234567-0) will be presented, no matter which extension is used to dial.
Inbound routes
In addition it is advised to activate the advanced options by clicking it to 'ON' and then pressing Show.
Rule
Enter here a name for the according rule.
Date / Weekdays / Time
With these settings you can configure a time-controlled routing to different targets.
Pattern / Target
In the pattern you define which part of the incoming number is used to forward the call to the according extension. In our example we cut off the first part 08912345 and forward all additional numbers (e.g.678) to the target. When the PBX finds an according extension it will route the call to it. The shown example is the easiest way for blocks of numbers, but also other configurations or assignments are possible.
Rule
Enter here a name for the according rule.
Date / Weekdays / Time
With these settings you can configure a time-controlled routing.
Pattern
In the pattern you define how the outside line is seized. In our example all dialled numbers starting with '0' will use the Gateway group External PRI.