|
|
When configuring a SIP trunk into the Hybird you must complete the following settings:
|
1 - Create a New trunk
2 - Connection Type = SIP Provider (DDI)
3 - Sip Provider Settings
Name = Info only
Authentication ID = SIP-ID given to you from VoIP Unlimited
Password = Password given to you from VoIP Unlimited
Registrar = sip.voip-unlimited.net
4 - Trunk Numbers
Insert the range mius the last x digits.
For example if your rage is 555500 to 555599,
Extensions = 10 to 20
Make the base number as 5555
555510 to 555520 will route direct to extensions, all other numbers would need to be added to P-P DDI Exception (see below)
5 - Class of Service - Select a COS
Advanced Settings
6 - Registrar Port
7 - Transport Prpotocol
8 - STUN server
If required : stun.voip-unlimited.net
Port = 10000
9 - P-P DDI Exceptions
Add the any DDI's not going to extensions with the same number.
Just the last digits from the range, in the example above any DDI 00 to 99.