Rescue / Recovery procedure
In case the phone crashed and can't boot up successfully. Flash memory data destroyed. Then you can use the following procedure to install the latest firmware in the device.
To download the latest firmware, please go to our Product pages.
Using the reset button at the bottom of the device
At the bottom of the device, there is a reset button.
Press and hold Reset button and then plug in the power cord, after the booting screen, it will get into a "Rescue Mode".
You will see the following text on the display:
Enter Rescue Mode Are you sure?
No Yes
Press "Yes" to enter the Rescue mode. You will see the following text on the display:
Waiting for upgrade
192.168.15.1
Now you can install new software using TFTP . Your Computer should be in the same Network like the phone (192.168.15.x)
On Windows
tftp -i <PHONE-IP-address> PUT filename.img
On MAC
tftp
connect 192.168.15.1
binary
rexmt 1
timeout 60
put <filename.img>
For downloading the image-files, please visit our product-pages: www.gigaset.pro |