Please NOTE that all the presented below parameters can be prepared in automatic way using In order to get the Authentication details to the Gigaset provisioning tool, please follow this link. For more detailed information of how it can be done, please read this short Short manual |
Parameter-Name | possible Values | Type | Default | Mapped with WebUi | Reboot Mandatory | Where to find / Description |
---|---|---|---|---|---|---|
B_... - boolean expressed as true/false. | value | |||||
I_... - integer value in range +/-(2^15 - 1) | ||||||
S_... - string value, e.g. “Ala ma kota” (entered without quotation signs). | Y = Yes N = No | |||||
Network & Connection | ||||||
LAN settings | ||||||
B_HTTP_PROXY_ACTIVATE | false = off true = on | Boolean | Yes | N | HTTP Proxy -> Enable Proxy | |
S_HTTP_PROXY_ADDR | max. 64 characters from (0-9,a-z,A-Z,-,.) | String | Yes | N | HTTP Proxy -> Proxy Server Address | |
I_HTTP_PROXY_PORT | 1~65535; default:80 | Integer | Yes | N | HTTP Proxy -> Proxy Server Port | |
I_HTTP_PORT | 1~65535 | Integer | 80 | Yes | N | Own HTTP Server Settings -> HTTP Port |
I_HTTPS_PORT | 1~65535 | Integer | 443 | Yes | N | Own HTTP Server Settings -> HTTPS Port |
I_HTTP_CONNECTION_TYPE | 0: HTTP 1: HTTPS 2: HTTP + HTTPS | Integer | 0 | Yes | N | Own HTTP Server Settings -> HTTP Connection Type |
I_HTTP_LOGOUT | 1~30; default = 10 (mins) | Integer | 10 | Yes | N | Own HTTP Server Settings -> Automatic Logout (min) |
VLAN settings | ||||||
I_VLAN_ACTIVATE | false = off true = on | Integer | 0 | Yes [Note: if 0 - "No", If 1 - "LAN Port Only" | N | LAN settings -> Activate VLAN |
I_VLAN_ID | 1~4094 | Integer | 7 | Yes | N | LAN settings -> VLAN ID (1..4094) NOTE: Availavle when Activate VLAN (LAN) is TRUE |
I_VLAN_LAN_PRIORITY | 0~7 | Integer | 1 | Yes | N | LAN settings -> VLAN Priority NOTE: Availavle when Activate VLAN (LAN) is TRUE |
I_VLAN_PC_ACTIVATE | false = off true = on | Integer | 0 | Yes | N | LAN settings -> Activate VLAN IMPORTANT NOTE: To enable VLAN on PC port, the VLAN functionality on LAN port must be enabled simultaneously. If VLAN on PC port is enabled but disabled on LAN port in profile, phone will ignore it and keep it disabled on PC port. |
I_VLAN_PC_ID | 1~4094 | Integer | 1 | Yes | N | LAN settings -> VLAN ID (1..4094) IMPORTANT NOTE: To enable VLAN on PC port, the VLAN functionality on LAN port must be enabled simultaneously. If VLAN on PC port is enabled but disabled on LAN port in profile, phone will ignore it and keep it disabled on PC port. |
I_VLAN_PC_PRIORITY | 0~7 | Integer | 0 | Yes | N | LAN settings -> Voice VLAN Priority NOTE: Availavle when Activate VLAN (PC) is TRUE |
Server and Phone Systems | ||||||
I_PHONE_SYSTEM | 1: Gigaset T500/300 2: Broadsoft 3: Starface 4: Asterisk 5: Standard 6: Sipgate Team 7: Unify OSBiz 8. Digitalisierungsbox 9. elmeg | Integer | 5 | Yes | Phone Systems -> Connected with Phone System (GC shall provide the possible options) | |
S_PBX_ENTITY_CFU | (no default, will be set by PBX) | String | Yes | Gigaset T500: Dialog Entity for PBX CFU | ||
S_PBX_CFU_ACTIVATE | NOTE: The part <NUMBER> is unchangable in the whole string provided by provisioning server. When phone originates INVITE to activate this feature, the part <NUMBER> can be replaced by a real number (i.e. in Call Divert). | String | *21* <NUMBER> # | Yes | Gigaset T500: dial code for activating CFU (call forwarding unconditional) | |
S_PBX_CFU_DEACTIVATE | String | #21# | Yes | Gigaset T500: dial code for deactivating CFU | ||
S_PBX_ENTITY_CFNR | (no default, will be set by PBX) | String | Yes | Gigaset T500: Dialog Entity for PBX CFNR | ||
S_PBX_CFNR_ACTIVATE | NOTE: see item "S_PBX_CFU_ACTIVATE" | String | *61* <NUMBER> # | Yes | Gigaset T500: dial code for activating CFNR (call forwarding on no reply) | |
S_PBX_CFNR_DEACTIVATE | String | #61# | Yes | Gigaset T500: dial code for deactivating CFNR | ||
S_PBX_ENTITY_CFB | (no default, will be set by PBX) | String | Yes | Gigaset T500: Dialog Entity for PBX CFB | ||
S_PBX_CFB_ACTIVATE | NOTE: see item "S_PBX_CFU_ACTIVATE" | String | *67* <NUMBER> # | Yes | Gigaset T500: dial code for activating CFB (call forwarding on busy) | |
S_PBX_CFB_DEACTIVATE | String | #67# | Yes | Gigaset T500: dial code for deactivating CFB | ||
S_PBX_ENTITY_CCBS | (no default, will be set by PBX) | String | Yes | Gigaset T500: Dialog Entity for PBX CCBS | ||
S_PBX_CCBS_ACTIVATE | String | *37# | Yes | Gigaset T500: dial code for activating CCBS (completion of calls to busy subscriber) | ||
S_PBX_CCBS_DEACTIVATE | String | #37# | Yes | Gigaset T500: dial code for deactivating CCBS | ||
S_PBX_ENTITY_DND | (no default, will be set by PBX) | String | Yes | Gigaset T500: Dialog Entity for PBX DND | ||
S_PBX_DND_ACTIVATE | String | *26# | Yes | Gigaset T500: dial code for activating DND (do not disturb) | ||
S_PBX_DND_DEACTIVATE | String | #26# | Yes | Gigaset T500: dial code for deactivating DND | ||
I_CM_AUTO_ANSWER | 0: No 1: via Hands-free 2: via Headset | Integer | 0 | Yes | Call manager -> Accept calls via Call Manager directly | |
I_CM_EXEC_OUT_CALL | 0: deactivated (default) | Integer | 0 | Yes | Call manager -> Execute Outgoing Calls | |
I_CM_ACCEPT_IN_CALL | 0: No (default) 1: via Hands-free 2: via Headset | Integer | 0 | Yes | Call manager -> Accept Incoming Calls | |
S_BLF_LIST | maximum 64 characters | String | Yes | Server and Phone System -> BLF list IP address (URL) | ||
S_UCI_SERVER | Server URL | String | Yes | (If phone systems selected as Celsius / Starface) Phone System -> Extended service platform -> Server addrss | ||
S_UCI_LOGIN_ID | User name | String | Yes | (If phone systems selected as Celsius / Starface) Phone System -> Extended service platform -> User name | ||
S_UCI_PASSWORD | Password | String | Yes | (If phone systems selected as Celsius / Starface) Phone System -> Extended service platform -> Passwords | ||
Broadsoft | ||||||
S_XSP_HOST | URL to Broadsoft XSI server. Format: http://<providerURL> | String | Only available when Broadsoft is selected as PBX Telephony | |||
S_XSP_USER | Broadsoft XSI Username | String | Only available when Broadsoft is selected as PBX Telephony | |||
S_XSP_PW | Broadsoft XSI Password | String | Only available when Broadsoft is selected as PBX Telephony | |||
S_CALLCENTER_LOGIN_ID | Call Center User name | String | (If phone systems selected as Broadsoft) Phone System ->Call Center User name | |||
S_ENHANCED_CALL_LOG | 0:basic Call Log 1:enhanced Call Logs | String | 0 | No | No | The Call Detail Server enables service providers to offer Enhanced Call Logs. With this feature, users can view call logs beyond the 20 records of dialed, received, and issed calls that are available with BroadWorks Web Call Logs feature. |
QoS Settings | ||||||
I_SIP_DSC | 0~63 | Integer | 34 | Yes | VoIP Quality of Service (QoS) -> SIP ToS/Diffserv (0..63) | |
I_RTP_DSC | 0~63 | Integer | 46 | Yes | VoIP Quality of Service (QoS) -> RTP ToS/Diffserv (0..63) | |
I_RTP_DSC_VIDEO | 0~63 | Integer | 46 | Yes | VoIP Quality of Service (QoS) -> RTP ToS/Diffserv (0..63) | |
VoIP Settings | (When getting the following settings, "Listen ports for VoIP connections -> Use random ports" will be set automatically to "NO") | |||||
B_RANDOM_PORT | false = off true = on | Boolean | 0 | Listen ports for VoIP connections -> Use random ports | ||
I_SIP_PORT | 1025~65535 (defaul 5060) Example: Use Random Ports is FALSE: one single value like "5060" | String | 5060 | Listen ports for VoIP connections -> SIP Port | ||
I_SIP_PORT_1 | 1025~65535 (default- 6000) Example: Use Random Ports is TRUE: values like "5080" to be a valid range; difference of 20 ports at least between I_RTP_PORT and I_RTP_PORT_1 | String | 5060 | |||
I_RTP_PORT | 1025~65535 (default- 5004) Example: Use Random Ports is FALSE: one single value like "5004" | String | 49152 | Listen ports for VoIP connections -> RTP Port | ||
I_RTP_PORT_1 | 1025~65535 (default- 5024) Example: Use Random Ports is TRUE: values like "5024" to be a valid range; difference of 20 ports at least between I_RTP_PORT and I_RTP_PORT_1 | String | 49152 | |||
B_ICE | false = off true = on | Boolean | 0 | Listen ports for VoIP connections -> ICE Enabled | ||
Security Settings | ||||||
B_REMOTE_MANAGEMENT | false = off true = on | Boolean | 0 | Yes | N | Remote Management -> Allow access from other networks to the WEB configurator |
B_SRTP | false = off true = on | Boolean | 0 | Yes | Security Settings -> Secure RTP | |
B_ACCEPT_NON_SRTP | false = off true = on | Boolean | 1 | Yes | Security Settings -> Secure RTP | |
I_SIP_TRANSPORT | 0: UDP 1: TCP 2: TLS | Integer | 0 | Yes | Security Settings -> Choose network protocol | |
B_CERTIFICATE_AUTO_ACCEPT | false = off (Default) true = on | Boolean | 0 | Yes | ||
Telephony | ||||||
Connections | ||||||
NOTE: "N" = 1 - 12 | ||||||
I_DEFAULT_ACCOUNT | 0: Connection 1 1: Connection 2 2: Connection 3 ~~~~~~~ 11: Connection 12 | Integer | 0 | Default Send Account (it should not allow the Auto-P system to select the Mobile Connection as the default connection) | ||
B_SIP_ACCOUNT_IS_ACTIVE_(N) / (N)=1~12 | 0: Inactive (default) 1: Active | Boolean | 0 | Active | ||
S_SIP_ACCOUNT_NAME_(N) | max. 16 characters | String | Telephony -> Connections -> Edit -> Connection Name or Number | |||
S_SIP_LOGIN_ID_(N) | max. 32 characters | String | Telephony -> Connections -> Edit -> Authentication Name | |||
S_SIP_PASSWORD_(N) | max. 32 characters | String | Telephony -> Connections -> Edit -> Authentication Password | |||
S_SIP_USER_ID_(N) | max. 32 characters | String | Telephony -> Connections -> Edit -> Username | |||
S_SIP_DISPLAYNAME_(N) | max. 32 characters | String | Telephony -> Connections -> Edit -> Display Name | |||
S_SIP_DOMAIN_(N) | max. 64 characters from (0-9,a-z,A-Z,-,.) | String | Telephony -> Connections -> Edit -> Domain | |||
S_SIP_SERVER_(N) | max. 64 characters from (0-9,a-z,A-Z,-,.) | String | Telephony -> Connections -> Edit -> Proxy server address | |||
I_SIP_SERVER_PORT_(N) | 1025~65535 (default:5060) | Integer | 5060 | Telephony -> Connections -> Edit -> Proxy server port | ||
S_SIP_REGISTRAR_(N) | max. 64 characters from (0-9,a-z,A-Z,-,.) | String | Telephony -> Connections -> Edit -> Registration server | |||
I_SIP_REGISTRAR_PORT_(N) | 1025~65535 (default:5060) | Integer | 5060 | Telephony -> Connections -> Edit -> Registration server port | ||
I_RE_REGISTRATION_TIMER_(N) | 0~9999 (default: 120) | Integer | 180 | Telephony -> Connections -> Edit -> Registration refresh time sec | ||
I_OUTBOUND_PROXY_MODE_(N) | 0: Never (default) 1: Always 2: Automatic | Integer | 0 | Telephony -> Connections -> Edit -> Outbound proxy mode | ||
S_OUTBOUND_PROXY_(N) | max. 64 characters from (0-9,a-z,A-Z,-,.) | String | Telephony -> Connections -> Edit -> Outbound server address | |||
I_OUTBOUND_PROXY_PORT_(N) | 1025~65535 (default:5060) | Integer | Telephony -> Connections -> dit -> Outbound proxy port | |||
B_SIP_USE_STUN_(N) | 0: No (default) 1: Yes | Boolean | 0 | Telephony -> Connections -> Edit -> STUN enabled | ||
S_STUN_SERVER_(N) | max. 64 characters from (0-9,a-z,A-Z,-,.) | String | Telephony -> Connections -> Edit -> STUN server address | |||
I_STUN_SERVER_PORT_(N) | 1025~65535 (default:3478) | Integer | 3478 | Telephony -> Connections -> Edit -> STUN server port | ||
I_RE_STUN_TIMER_(N) | 0~9999 (default: 120) | Integer | 240 | Telephony -> Connections -> Edit -> STUN refresh time sec | ||
I_NAT_REFRESH_TIME_(N) | 0~9999 (default: 120) | Integer | 20 | Telephony -> Connections -> Edit -> NAT refresh time sec | ||
B_AUTOMATIC_DTMF_(N) | false = off true = on | Boolean | 0 | Telephony -> Connections -> Edit -> Automatic negotiation of DTMF transmission | ||
I_DTMF_TX_MODE_BITS_(N) | 1: Audio 2: RFC 2833 3: Audio + RFC2833 4: SIP Info 5: Audio + SIP Info 6: RFC2833 + SIP Info 7: Audio + RFC2833 + SIP Info | Integer | 5 | Telephony -> Connections -> Edit -> Send settings of DTMF transmission | ||
B_MISSED_ACCEPTED_COUNT_(N) | false = off true = on (Default) | Boolean | 1 | Telephony -> Connections -> Edit -> Missed/accepted calls count | ||
B_CALL_WAITING_(N) | false = off true = on | Boolean | Telephony -> Connections -> Edit -> Call Waiting | |||
Connections - Edit (Audio Settings) | ||||||
NOTE: For the first account, "_(N)" is not necessary for each parameter. For example, the ringer melody for the first account should be "I_RINGER_MELODIES" but not "I_RINGER_MELODIES_(1)". | ||||||
S_RINGER_MELODIES_(N) / N= 0, 2~12 | 0: Individual (only available when N is equal to "0") 1~21: 21 selectable types as present in MMI default value: /system/jetty/webapps/webui/melodies/01.mp3 | String | "/system/jetty/webapps/webui/melodies/06_Gigaset.ogg" | |||
I_RINGER_VOLUME | 0: Silence 1~10: 10 steps of volume for Hawking/Feynman (1~5: 5 steps of volume for Newton/Kelvin) | Integer | 6 | Settings -> Audio Settings -> Ringer Settings -> Volume | ||
I_RINGER_MELODIES_EC_(N) / N= 2~12 | 1~21: 21 selectable types as present in Web GUI | Integer | 6 | Telephony -> Connections -> Edit -> Melody - External Call | ||
I_RINGER_MELODIES_IC_(N) / N= 2~12 | 1~21: 21 selectable types as present in Web GUI | Integer | 6 | Telephony -> Connections -> Edit -> Melody - Internal Call | ||
I_RINGER_MELODIES_GC_(N) / N= 2~12 | 1~21: 21 selectable types as present in Web GUI | Integer | 6 | Telephony -> Connections -> Edit -> Melody - Group Call | ||
Audio | ||||||
I_VOICE_QUALITY_(N) | 0: Optimised for high bandwidth 1: Optimised for low bandwidth 2: Own Codec preference | Integer | 0 | Telephony -> Audio -> Voice Quality | ||
S_SIP_PREFERRED_VOCODER_(N) | 0: G711alaw Example: 0,1,2,3,4,6 for all codecs (separate by COMMA sign; no SPACE between each character; priority: left > right) | String | 0,1,3 | see WEB-GUI >= V22 set "own CODEC preference" as default! | ||
I_RTP_PACKET_SIZE_(N) | 1: 10ms 2: 20ms 3: 30ms **One setting only for all connections** ** 1 & 4~6 are reserved for other values that are not available in this hardware platform. | Integer | 2 | Telephony -> Audio -> Packed time for RTP packages [ms] | ||
B_SILENCE_SUPPRESSION | 0: No (default) 1: Yes **One setting only for all connections** | Boolean | 0 | Telephony -> Audio -> Silence Suppression | ||
Video | ||||||
S_SIP_PREFERRED_VIDEOCODER_(N) | 0 : H.264 1 : H.263 2 : H.263 | String | 0 | see WEB-GUI >= V22 set "own CODEC preference" as default! | ||
S_VIDEO_RESOLUTION | 720p VGA QVGA | String | 720p | |||
S_VIDEO_RESOLUTION_EXTERNAL | 720p VGA QVGA 1080p | String | 720p | |||
Local Settings | ||||||
I_AREA_COUNTRY | 0:Albania 1: Argentina 2: Australia 3: Austria 4: Bahrain 5: Belarus 6: Belgium 7: Bolivia 8: Bosnia and Herzegovina 9: Brazil 10: Bulgaria 11: Canada 12: Chile 13: China 14: Colombia 15: Costa Rica 16: Croatia 17: Cyprus 18: Czech Republic 19: Denmark 20: Ecuador 21: Egypt 22: Estonia 23: Finland 24: France 25: Germany 26: Greece 27: Hong Kong 28: Hungary 29: Iceland 30: India 31: Indonesia 32: Ireland 33: Israel 34: Italy 35: Japan 36: Jordan 37: Korea, Republic of 38: Kuwait 39: Latvia 40: Lebanon 41: Liechtenstein 42: Lithuania 43: Luxembourg 44: Macedonia 45: Malaysia 46: Mexico 47: Morocco 48: Netherlands 49: New Zealand 50: Norway 51: Pakistan 52: Panama 53: Paraguay 54: Peru 55: Philippines 56: Poland 57: Portugal 58: Puerto Rico 59: Romania 60: Russia 61: Saudi Arabia 62: Serbia 63: Singapore 64: Slovakia 65: Slovenia 66: South Africa 67: Spain 68: Sweden 69: Switzerland 70: Taiwan 71: Thailand 72: Turkey 73: United Arab Emirates 74: United Kingdom 75: United States of America 76: Uruguay 77: Venezuela 78: Vietnam 79: Namibia 80: Palestine 81: Montenegro 82: Other Country | Integer | Telephony -> Local Settings -> Area Codes -> Country | |||
S_AREA_LOCAL_PREX | max. 4 phonedigits (0-9,*,#,R,P) | String | 0 | Telephony -> Local Settings -> Area Codes -> Local Prefix | ||
S_AREA_LOCAL_AREA | max. 8 phonedigits (0-9,*,#,R,P) | String | Telephony -> Local Settings -> Area Codes -> Local Area Code | |||
I_TONE_SCHEME | 1 Canada | Integer | 9 | Telephony -> Local Settings -> Ring Tones -> Tone Scheme | ||
Dialing Plans | ||||||
S_DIAL_NUMBER_(N) | N=1~30 | String | Telephony -> Dialling Plans -> Phone Number | |||
B_DIAL_AREA_(N) | false = off true = on N=0~N; N is not defined yet | Boolean | 0 | Telephony -> Dialling Plans -> Use Area Codes | ||
I_DIAL_CONNECTION_(N) | 0: Connection 1 1: Connection 2 2: Connection 3 ~~~~~~~ 11: Connection 12 | Integer | Telephony -> Dialling Plans -> Connection | |||
S_DIAL_COMMENT_(N) | String | Telephony -> Dialling Plans -> Comment | ||||
B_DIAL_ACTIVE_(N) | false = inactive true = active | Boolean | 0 | Telephony -> Dialling Plans -> Active | ||
S_ACCESS_CODE | max. 4 digits (0, 1~9; numeric only) | String | Telephony -> Dialling Plan -> Access Code | |||
I_USE_ACCESS_CODE | 0: None (default) 1: Directory & Call Lists 2: All Allows 0~63; constructed by the 6 specified numbers of the 6 options. 32: outgoing calls list dialing 16: incoming calls list dialing 8: user defined net directory dialing 4: local directory dialing 2: public net directory dialing 1: manual dialing E.g. "outgoing calls list dialing + user defined net directory dialing + local directory dialing" = 32+8+4 = 44; 0 means no option is selected | Integer | 0 | Telephony -> Dialling Plan -> Access Code | ||
Call Divert | ||||||
S_CF_NUMBER_(N)_(N) | max. 63 characters | String | Telephony -> Call Divert -> Phone Number | |||
B_CF_ACTIVE_(N)_(N) | false = off (Default) true = on | Boolean | 0 | Telephony -> Call Divert -> CheckBox | ||
I_CF_NOANSWER_TIMEOUT_(N) | 1~600; default = 15 sec | 15 | ||||
Do Not Disturb | ||||||
B_DND_LIST_ACTIVATE | false = off (Default) true = on | Boolean | 0 | Telephony -> Do Not Disturb -> Activate DND List | ||
B_ANON_CALL | false = off (Default) true = on | Boolean | 0 | Telephony -> Do Not Disturb -> Block anonymous caller | ||
S_DND_LIST | String | Telephony -> Do Not Disturb -> DND Name+Number | ||||
Call Live Recording | ||||||
I_CALL_RECORD | 0: at USB Stick 1: at Server 2: at Phone | Integer | 2 | Call Live Recording -> Call Record | ||
Voice Mail Services | Note: Not available if phone system is Gigaset T500/T300. | |||||
S_VOIP_NET_AM_NUMBER_(N) / (N)=1~12 | max. 32 phonedigits (0-9,*,#,R,P) NOTE: The Voice Mail account must not be empty if it is enabled (i.e. B_VOIP_NET_AM_ENABLED_(N) = 1: Active). | String | Mailbox Number | |||
B_VOIP_NET_AM_ENABLED_(N) | 0: Inactive 1: Active | Boolean | 0 | Active | ||
Services | ||||||
Door Interphone | ||||||
N = 1 - 10 | ||||||
S_DOOR_NAME_(N) | max. 32 characters | String | Services -> Door Interphone -> Name | |||
S_DOOR_ID_(N) | max. 32 characters | String | Services -> Door Interphone -> SIP ID | |||
S_DOOR_CODE_(N) | max. 16 characters | String | Services -> Door Interphone -> DTMF Code | |||
S_DOOR_URL_(N) | max. No Limit characters; Note: Must be started with "http://" and is valid URL | String | Services -> Door Interphone -> Camera (URL) | |||
I_DOOR_RATE_(N) | 200~99999; default = 500 ms | Integer | 50 | Services -> Door Interphone -> Reload Rate | ||
Net-Directories | ||||||
LDAP based Net-Directory | ||||||
S_LDAP_NAME | max. 16 characters | String | Corporate Directory | Services -> LDAP -> Name of Directory | ||
I_LDAP_MAX_HITS | 1~250; (default: 50) | Integer | 50 | Services -> LDAP -> Max. Hits | ||
B_LDAP_CALL_LOOKUP | false = off (Default) true = on | Boolean | 0 | Services -> LDAP -> LDAP lookup for incomingcalls | ||
S_LDAP_IP | max. 64 characters; Must be valid URL | String | Services -> LDAP -> Server Address | |||
I_LDAP_PORT | 1~65535 | Integer | Services -> LDAP -> Server Port | |||
S_LDAP_SEARCH_BASE | max. 64 characters | String | Services -> LDAP -> LDAP Search Base | |||
S_LDAP_AUTH_NAME | max. 64 characters | String | Services -> LDAP -> Username | |||
S_LDAP_AUTH_PASSWORD | max. 64 characters | String | Services -> LDAP -> Password | |||
S_LDAP_NAME_FILTER | max. 64 characters | String | Services -> LDAP -> LDAP Name Filter | |||
S_LDAP_NUM_FILTER | max. 64 characters | String | Services -> LDAP -> LDAP Number Filter | |||
B_LDAP_ENABLE_PHONEBOOK | 0: Disable 1: Enable (default) | Boolean | ||||
S_LDAP_ATTRIB_FN | max. 64 characters; default = givenName | String | givenName | Services -> LDAP -> First Name | ||
S_LDAP_ATTRIB_SN | max. 64 characters; default = sn | String | sn | Services -> LDAP -> Surname | ||
S_LDAP_ATTRIB_HOME | max. 64 characters; default = homePhone | String | homePhone | Services -> LDAP -> Phone (Home) | ||
S_LDAP_ATTRIB_WORK | max. 64 characters; default = telephoneNumber | String | telephoneNumber | Services -> LDAP -> Phone (Work) | ||
S_LDAP_ATTRIB_MOBILE | max. 64 characters; default = mobile | String | mobile | Services -> LDAP -> Phone (Mobile) | ||
S_LDAP_ATTRIB_EMAIL | max. 64 characters; default = mail | String | Services -> LDAP -> Email | |||
S_LDAP_ATTRIB_FAX | max. 64 characters; default = facsimileTelephoneNumber | String | facsimileTelephoneNumber | Services -> LDAP -> Fax | ||
S_LDAP_ATTRIB_TITLE | max. 64 characters; default = title | String | ttle | Services -> LDAP -> Job Title | ||
S_LDAP_ATTRIB_COMPANY | max. 64 characters; default = company | String | company | Services -> LDAP -> Company | ||
S_LDAP_ATTRIB_STREET | max. 64 characters; default = street | String | street | Services -> LDAP -> Street | ||
S_LDAP_ATTRIB_CITY | max. 64 characters; default = l (lower case of L) | String | l (lower case of L) | Services -> LDAP -> City | ||
S_LDAP_ATTRIB_ZIP | max. 64 characters; default = postalCode | String | postalCode | Services -> LDAP -> Zip | ||
S_LDAP_ATTRIB_COUNTRY | max. 64 characters; default = friendlyCountryName | String | friendlyCountryName | Services -> LDAP -> Country | ||
S_LDAP_ATTRIB_NEW | max. 64 characters; default = <empty> | String | Services -> LDAP -> Additional | |||
XML based Net-Directory | ||||||
S_NETDIR_NEW_LABEL | max. 16 characters | String | It's the label of the new added Net Directory that will be present in the Provider List. | |||
S_NETDIR_NEW_ADDR | max. 64 characters from (0-9,a-z,A-Z,-,.) | String | Add New Provider -> Server Address | |||
S_NETDIR_NEW_NAME | max. 64 characters | String | Add New Provider -> Authentication name | |||
S_NETDIR_NEW_PASSW | max. 64 characters | String | Add New Provider -> Authentication password | |||
B_NETDIR_NEW_LOOKUP | ||||||
S_NETDIR_WHITE_NAME | max. 16 characters | String | White Pages -> Name of Directory | |||
B_NETDIR_WHITE_ACTIVATE | 0: No (default) 1: Yes | Boolean | 0 | White Pages -> Enable "White Pages" | ||
S_NETDIR_YELLOW_NAME | max. 16 characters | String | Yellow Pages -> Name of Directory | |||
B_NETDIR_YELLOW_ACTIVATE | 0: No (default) 1: Yes | Boolean | 0 | Yellow Pages -> Enable "White Pages" | ||
S_NETDIR_PRIV_NAME | max. 16 characters | String | Private NetDirectory -> Name of Directory | |||
B_NETDIR_PRIV_ACTIVATE | 0: No (default) 1: Yes | Boolean | 0 | Private NetDirectory -> Enable "White Pages" | ||
B_XMLNETDIR_AUTOLOOKUP | 0: Disable (default) 1: Enable | Boolean | 1 | Online Directory -> XML Net Directory Autolookup checkbox | ||
Function Keys, index range: X=1-56 | ||||||
I_FUNCTION_KEY_TYPE_(X) | 0: default init (NULL) entry (end of list) 1: Park + Orbit 2: SpeedDial 3: BLF 4: Call Divert 5: DTMF 6: None (entry within the list with no function assigned) | Integer | 0 | |||
I_FUNCTION_KEY_CONNECTION_KEY_(X) | 0: Connection 1 1: Connection 2 2: Connection 3 ~~~~~~~ 11: Connection 12 | Integer | 1 | select VoIP account | ||
S_FUNCTION_KEY_NUM_(X) | max. 63 characters | String | Extention Number or Phone Number depending on function key type | |||
S_FUNCTION_KEY_NAME_(X) | max. 64 characters | |||||
S_DIRECTED_PICKUP_CODE_(X) | max. 4 characters: 0, 1~9, * and # (default = **) | String | Code is used to pick up a call from a blinking BLF-LED | |||
System | ||||||
Date & Time | ||||||
B_AUTO_SYNC_TIME | 0: No 1: Yes (default) | Boolean | Time -> Automatic adjustment of System Time with Time Server | |||
S_TIME_NTP_SERVER | max. 64 characters from (0-9,a-z,A-Z,-,.) | String | Time -> Time Server NOTE: Availavle when Automatic adjustment of System Time with Time Server is TRUE | |||
I_TIME_ZONE | 1: Pacific/Majuro | Integer | Settings -> System -> Time -> Time Zone | |||
B_DAYLIGHT_SAVING | 0: No (default) 1: Yes | Boolean | Settings -> System -> Time -> Automatically adjust clock to summer-time changes | |||
Security | ||||||
S_ADMIN_PASSWORD | max. 16 characters | String | admin | Change Administrator Password -> New Password | ||
S_PROV_USERNAME | max. 96 characters | String | System -> Security -> Broadsoft/Provisioning Username WebUi Password to be used for Auto Provisioning/Broadsoft login username (to be used after device username, password fails for authentication) | |||
S_PROV_PASSWORD | max. 32 characters | String | System -> Security -> Broadsoft/Provisioning Password WebUi Password to be used for Auto Provisioning/Broadsoft login username (to be used after device username, password fails for authentication) | |||
Reboot and Reset | ||||||
B_AUTOREBOOT_TIME_OPTION | false: No (default) true: Yes | Boolean | ||||
I_AUTOREBOOT_TIME_MINUTES | Integer | |||||
I_AUTOREBOOT_TIME_HOURS | Integer | |||||
Display | ||||||
I_DEVICE_LANGUAGE | 1: afrikaans | Integer | 9 | System -> Display -> Display Formats -> Device Language | ||
I_WEB_LANGUAGE | 0: Deutsch | Integer | 1 | Display Formats -> Web Interface Language | ||
B_NAME_SORT | 0: First Name | Boolean | 0 | System -> Display -> Display Formats-> Sort Criteria Directory | ||
Provisioning | ||||||
S_DATA_SERVER | max. 255 characters from (0-9,a-z,A-Z,-,.) default = profile.gigaset.net/device | String | http://profile.gigaset.net/device | File Locations -> Data Server (default: profile.gigaset.net/device) | ||
EXTENDED_PROFILE | max. 255 characters from (0-9,a-z,A-Z,-,.) | String | URL to extra xml with extended configurable parameters | |||
CERTIFICATE | max. 255 characters from (0-9,a-z,A-Z,-,.) | String | URL to certificates.zip to be installed on device | |||
S_AUTOPROVISIONING_CODE | String | Code to detect binary index file. For example 555 | ||||
S_CONFIGFILE_URL | max. 255 characters | String | When this parameter is configured, the device will direct download the (xml) configuration file from the http server. If not configured, the Gigaset File structure is needed. | |||
REBOOT | false : default | Boolean | No value but special command tag which forces the device to reboot after profile download if enabled | |||
Firmware Upgrade | ||||||
B_AUTO_FIRMWARECHECK_ACTIVATE | 0: No (default) 1: Yes | Boolean | 0 | Automatic check for software updates. WebUI: Settings->System->Firmware Update: Automatic check for software updates (Checkbox: Yes/No) | ||
B_AUTO_PROFILECHECK_ACTIVATE | 0: No 1: Yes (default) | Boolean | 1 | Automatic check for profile updates. WebUI: Settings->System->Firmware Update: Automatic check for profile updates(Checkbox: Yes/No) | ||
Screenshot | ||||||
B_USE_POWERKEY_SCREENSHOT | 0: No (default) 1: Yes | Boolean | 0 | WebUI: System -> Screenshot -> Screenshot via reset key | ||
Syslog | ||||||
B_SYSLOG_ALL | false: No (default) true: Yes | Boolean | 0 | |||
B_SYSLOG_SYSTEM | false: No (default) true: Yes | Boolean | 0 | |||
B_SYSLOG_SIP_EVENTS | false: No (default) true: Yes | Boolean | 0 | |||
B_SYSLOG_PHONE | false: No (default) true: Yes | Boolean | 0 | |||
B_SYSLOG_PROVISIONING | false: No (default) true: Yes | Boolean | 0 | |||
S_SYSLOG_SERVER | max. 255 characters from (0-9,a-z,A-Z,-,.) | String | ||||
I_SYSLOG_PORT | 514 (defaut) | Integer | 514 | |||
B_SYSLOG_ENABLE | false: No (default) true: Yes | Boolean | 0 | |||
Miscellaneous | ||||||
B_CHECKSYNC_ENABLE | false: No (only for CTS) true: Yes (default) | Boolean | 1 | To perform SIP Multicast on device boot. No option in webui. | ||
I_WEBUI_WEBSERVER_SWITCH_MODE | 0: Mode: administrator Settings-webui-switch (by default): Disabled WebUi default state (Jetty server): Always running. In this mode only administrator will have control of webui. User will never be able to switch off webui via Android settings.On each reboot webui will start automatically. 1: Mode: user Settings-webui-switch (by default): Enabled WebUi deault state (Jetty server status): Running In this mode, User will have full control of webui to switch on/off webui. On each reboot webui will start automatically. 2: Mode: cts Settings-webui-switch (by default): Enabled WebUi deault state (Jetty server status): not running In this mode, User will have full control of webui to switch on/off webui. On each reboot webui will start automatically. | Integer | 1 | WebUi -> Local Area and Networks (LAN) -> Select Mode 1. Administrator 2. User 3. CTS | ||
B_EMERGENCY_NUMBER_N (N = 1 to 30) | Boolean | 0 | For emergency numbers (to dial from phone lock screen) Not sure where this has to be added in WebUi ? | |||
I_VOIP_CLIR_PRIVACY_LEVEL | none (headers remain untouched): 0 user : 1 Net_Header : 2 NET_ID :64 (default = 64) user+ Net_Header+ NET_ID : 67 | Integer (Decimal) | 40 | Note: In xml value mentioned as 43 is represented in internally considered as Hexadecimal value HEX BIN DEZ 0x00 = 00000000 = 0 (no privacy) 0x01 = 00000001 = 1 (privacy user) 0x02 = 00000010 = 2 (privacy header) 0x03 = 00000011 = 3 (privacy user+header) 0x40 = 01000000 = 64 (privacy ID) 0x41 = 01000001 = 65 (privacy user+ID) 0x42 = 01000010 = 66 (privacy header+ID) 0x43 = 01000011B = 67 (privacy user+header+ID) |