DX800 enabling Redirect Server

Dependent on the DX800 variant, it can be that the redirect server option is disabled. This can only be enabled via special configuration, for this you need a patch. The patch is based on the variant and contains the following settings to enable redirect server.

DX800 enable redirect

BS_IP_Data1.ucB_HAS_PROVISIONING_CODE=1
BS_IP_Data1.ucB_SHOW_PROVISIONING_CODE_IN_HS=1
BS_IP_Data1.ucB_AUTOPROVISIONING=0
BS_IP_Data1.ucI_AUTOPROVISIONING_STYLE=0
BS_IP_Data1.ucB_AUTO_UPDATE_PROFILE=1
BS_IP_Data3.ucI_ONESHOT_PROVISIONING_MODE_1=1
BS_IP_Data1.aucS_AUTOPROVISIONING_CODE=0x34,0x34,0x34

Via the restore option, you can activate the patch below. If you variant is not listed you need to request this from Gigaset.

Patch for DX800 Dutch variant DX800_Provisioning_Norm_patch.cfg
Patch for DX800 GER variant DX800_Provisioning_Norm_patch_de.cfg

As most of the DX800 parameters are the same like N510, you can also use the online tools for N510 to create config files.

Parameter-Name	possible Values	Web-UI	Where to find / Description
	B_... - boolean expressed as 1/0.
	I_... - integer value in range +/-(2^15 - 1)
	S_... - string value, e.g. “Ala ma kota” (entered without quotation signs).
Service-specific-data
I_TDS_AUTHENTICATION_MODE	0=ROM data / 1=USER data / 2=ROM or USER data / 3=SIP authentication mode	No	This parameter tells where HTTP auth login/password is stored. Value 3 is very usefull option. In this mode HTTP login and password will be get from first SIP account data.
B_TDS_TRANSMIT_MAC_ADDRESS		No	should mac address of device be included in every request "bTDSTransmitMacAddress = 1".
S_TDS_ISO_3166_1		Yes	WebUI-Country-code-for-Telephonebook-entry
S_TDS_TXT_AL_HEADER
S_TDS_TXT_NAME
S_AVAILABLE_OTDP		Yes	WebUI-Available-Telephonbooks-under-Services (default:6B747467656E67736862736500FFFFFF)
S_TDS_MNEMONIC		Yes	WebUI-Active-Telephonebook-under-Services
S_TDS_SERVICE_URL		No	URL address of the phonebook server (must be ended with ?)
S_TDS_LOGIN		No	if phonebook server requires authentication (only HTTP Digest MD5 is supported)
S_TDS_LOGIN_PASS		No	CRYPTED password (password can be generate by sw-development)
I_TDS_CAPABILITIES		No	provider capabilities "aucTDSCapabilities". Capabilities byte are combined from following bits: AEIP_OTDP_CAP_PEOPLE_SEARCH = 0x01, <-- white pages AEIP_OTDP_CAP_BUSINESS_SEARCH = 0x02, <-- yellow pages AEIP_OTDP_CAP_REVERSE_LOOKUP = 0x04, <-- search by phone number AEIP_OTDP_CAP_PRIVATE_NETWORK_DIRECTORY = 0x08, <-- 3rd book type - private phonebook AEIP_OTDP_CAP_AUTO_LOOKUP = 0x10, <-- if reverse lookup is active, all incoming calls will be looked inside netdir and caller name will be presented on display AEIP_OTDP_CAP_NICKNAME_FOR_PRIVATE_NETWORK_DIRECTORY = 0x20, <-- private phonebook supports user defined firmware AEIP_OTDP_CAP_ENCRYPT_POSTS = 0x40, <-- private phonebook - all sent data will be encrypted
S_TDS_TXT_MENU		No	Handset-Telephonebook-Search-Menue-Header
S_TDS_TXT_HEADER		No	Handset-Telephonebook-Search-Result-Header
S_TDS_TXT_SEARCH_1		No	Handset-Telephonebook-Search-note-Line-1
S_TDS_TXT_SEARCH_2		No	Handset-Telephonebook-Search-note-Line-2
S_TDS_TXT_DEP_MENU		No	Handset-Yellowpages-Search-Menue-Header
S_TDS_TXT_DEP_HEADER		No	Handset-Yellowpages-Search-Result-Header
S_TDS_TXT_DEP_SEARCH_1		No	Handset-Yellowpages-Search-Note-Line-1
S_TDS_TXT_DEP_SEARCH_2		No	Handset-Yellowpages-Search-Note-Line-2
S_OTDP_AUTH_PASS		No
S_TDS_TXT_PTD_MENU		No	Handset-Private-Phonebook-Search-Menue-Header
S_TDS_TXT_PTD_HEADER		No	Handset-Private-Phonebook-Search-Result-Header
S_TDS_TXT_PTD_SEARCH_1		No	Handset-Private-Phonebook-Search-Note-Line-1
S_TDS_TXT_PTD_SEARCH_2		No	Handset-Private-Phonebook-Search-Note-Line-2
S_OTDP_AUTH_NAME		No
IP Configuration
B_USE_DHCP	boolean true/false	Yes	Settings --> IP-configuration --> IP address type
I_IP		Yes	Settings --> IP-configuration --> IP address
I_SUBNET_MASK		Yes	Settings --> IP-configuration --> Subnet mask
I_DEFAULT_ROUTER		Yes	Settings --> IP-configuration --> Default gateway
I_DNS_SERVER_1		Yes	Settings --> IP-configuration --> Preferred DNS server
I_DNS_SERVER_2		Yes	Settings --> IP-configuration --> Alternate DNS server
B_ACCEPT_FOREIGN_SUBNET	boolean true/false	Yes	Settings --> IP-configuration --> Allow access from other networks
B_HTTP_PROXY_ENABLED		Yes	Settings --> IP-configuration --> Enable proxy
S_HTTP_PROXY_URL		Yes	Settings --> IP-configuration --> Proxy server address
I_HTTP_PROXY_PORT		Yes	Settings --> IP-configuration --> Proxy server port
B_SHOW_QUESTION_MARK_IN_WEB		Yes	Question mark in the right-upper corner
B_SHOW_SECURITY_ADVICE		Yes	Security advice after login if password or similar is not changed
I_HTTPLANGUAGE		Yes	Before login you can change the WebUI-language
// enabled web languages
B_WEB_LANGUAGE_ENABLED_ENG		Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_GER		Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_FRE		Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_ITA		Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_NDL		Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_ENGUS		Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_ARA		Yes	Offered languages for the WebUI (at login!)
B_WEB_LANGUAGE_ENABLED_RUS		Yes	Offered languages for the WebUI (at login!)
B_SIP_USE_STUN_SHC		Yes	Settings --> Telephony --> Connections --> Gigaset.net --> STUN enabled
Advanced VOIP settings
B_DTMF_TX_MODE_AUTO		Yes	Settings --> Telephony --> Advanced Settings --> Send settings
I_DTMF_TX_MODE_BITS	(BITS!) 1=audio, 2=RFC 2833, 4=SIP INFO	Yes	Settings --> Telephony --> Advanced Settings --> Send settings
B_USE_R_KEY_FOR_CALL_TRANSFER		Yes	Settings --> Telephony --> Advanced Settings --> Use R-Key to initiate call transfer with the SIP Refer method
B_CT_AFTER_ON_HOOK		Yes	Settings --> Telephony --> Advanced Settings --> Transfer Call by On-Hook
B_USE_RANDOM_PORT		Yes	Settings --> Telephony --> Advanced Settings --> Use random ports
I_SIP_LOCAL_PORT		Yes	Settings --> Telephony --> Advanced Settings --> SIP port (min)
I_RTP_LOCAL_PORT		Yes	Settings --> Telephony --> Advanced Settings --> RTP port (min)
I_SIP_LOCAL_PORT_MAX		Yes	Settings --> Telephony --> Advanced Settings --> SIP port (max)
I_RTP_LOCAL_PORT_MAX		Yes	Settings --> Telephony --> Advanced Settings --> RTP port (max)
B_VOIP_CALLWAITING_STATUS		Yes
B_CTO_REFER_TO_PREFERRED_CONTACT		Yes	Settings --> Telephony --> Advanced Settings --> Preferred Refer To
B_CTO_REFER_TO_AUTOMATIC		Yes	Settings --> Telephony --> Advanced Settings --> Automatic Refer To
Audio settings
B_ONLY_ONE_ACTIVE_VOIP_CALL		Yes	Settings --> Telephony --> Audio --> Allow 1 VoIP Call only
I_SIP_PREDEFINED_VOCODER		Yes
I_SIP_AVAILABLE_VOCODER		Yes
Number assignment
B_AUTOMATIC_FALLBACK_TO_PSTN		Yes	Settings --> Telephony --> Number Assignment --> Automatic fallback to fixed line
B_ENHANCED_AUTOFALLBACK		Yes	Settings --> Telephony --> Number Assignment --> Enhanced Auto-Fallback
S_PSTN_NAME		Yes	Settings --> Telephony --> Connections --> Fixed Line --> Connection Name or Number
Dialing plans
I_DIALING_PLAN_COUNTRY_ID		Yes	Settings --> Telephony --> Dialling Plans --> Country
S_CITY_CODE		Yes	Settings --> Telephony --> Dialling Plans --> Local Area Code
B_USE_CITY_CODE		Yes	Settings --> Telephony --> Dialling Plans --> Predial area code for local calls through VoIP
S_SIP_SHC_DISPLAYNAME		No	Handset!! --> Call gigaset.net --> Options --> Own details
B_SHC_CALLFORWARDING_STATUS_1		Yes	Settings --> Telephony --> Call Forwarding --> Gigaset.net
I_SHC_CALLFORWARDING_WHEN_1		Yes	Settings --> Telephony --> Call Forwarding --> Gigaset.net --> When
S_SHC_CALLFORWARDING_NUMBER_1		Yes	Settings --> Telephony --> Call Forwarding --> Gigaset.net --> Call number
B_SIP_SHC_ACCOUNT_IS_ACTIVE		No	Enable Gigaset.net account
E-mail
S_EMAIL_SERVER		Yes	Settings --> Messaging --> E-Mail --> POP3 Server
S_EMAIL_USERNAME		Yes	Settings --> Messaging --> E-Mail --> Authentication Name
S_EMAIL_PASS		Yes	Settings --> Messaging --> E-Mail --> Authentication Password
I_EMAIL_POLL_TIME	Value in minutes	Yes	Settings --> Messaging --> E-Mail --> Check for new e-mail
Info Services
B_SHOW_INFO_SERVICE_SERVER_ADVICE		Yes	Settings --> Services --> Advice under "Activate Info Services"
B_INFO_SERVICE_ACTIVE		Yes	Settings --> Services --> Activate Info Services
S_INFO_SERVICE_URL		No	URL for the Info-Services-Server
Management Date & Time
S_TIME_NTP_SERVER		Yes	Settings --> Management --> Date&Time --> Time Server
B_TIME_USE_AUTOMATIC_NTP_SYN		Yes	Settings --> Management --> Date&Time --> Automatic adjustment of System Time with time server
I_TIME_COUNTRY		Yes	Settings --> Management --> Date&Time --> Country
I_TIME_TIMEZONE		Yes	Settings --> Management --> Date&Time --> Time Zone
B_TIME_USE_AUTOMATIC_DST		Yes	Settings --> Management --> Date&Time --> Automatically adjust clock to summer-time changes
B_HAS_NTP_SETTINGS		No
Miscellaneous
B_SHOW_VOIP_STATUS_ON_HANDSET		Yes	Settings --> Management --> Miscellaneous --> Show VoIP status on handset
Firmware Update
S_DATA_SERVER		Yes	URL for the gigaset.net-server
Provisioning-specific-data
// TR-069
S_DEV_MGMT_SRVR_URL		No
S_DEV_MGMT_SRVR_USER		No
S_DEV_MGMT_SRVR_PW		No
I_DEV_MGMT_SRVR_INF_EN		No
I_DEV_MGMT_SRVR_INF_INTV_O		No
S_DEV_MGMT_SRVR_PARKEY		No
S_DEV_MGMT_SRVR_CONN_USER		No
S_DEV_MGMT_SRVR_CONN_PW		No
S_DEV_MGMT_SRVR_OUI		No
S_DEV_PRODCLASS		No
S_DEV_MGMT_SRVR_SERNUM		No
B_TR069_SEND_TRANSF_COMPL		No
S_TR069_COMMAND_KEY		No
S_TR069_AES_KEY		No
B_BOOTSTRAP_TRIGGER		No
B_TR69_MGMT_ENABLED		No
I_DEV_MGMT_SRVR_INF_INTV		No
B_HAS_PROVISIONING_CODE		No
B_SHOW_PROVISIONING_CODE_IN_HS		No
B_DO_AUTOMATIC_UPDATES		Yes	General indication if a check for new FW / Profie will occur every night.
B_AUTO_UPDATE_FW		No	Indication if a new firmware will be stored directly, without user interaction and signalling via MWI (forced update).
B_AUTO_UPDATE_PROFILE		No	Indication if a new Profile will be stored directly, without user interaction and signalling via MWI (forced update).
I_REMINDER_FW_UPDATE		No	Value in "x" days! If the value is greater than 0, the customer will get a reminder via MWI again after "x" days.
I_REMINDER_PROFILE_UPDATE		No	Value in "x" days! If the value is greater than 0, the customer will get a reminder via MWI again after "x" days.
S_USER_FIRMWARE_URL		No
// Auto-Provisioning Codes/Modes
S_AUTOPROVISIONING_CODE		Yes	Settings --> Telephony --> Account 1 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_2		Yes	Settings --> Telephony --> Account 2 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_3		Yes	Settings --> Telephony --> Account 3 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_4		Yes	Settings --> Telephony --> Account 4 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_5		Yes	Settings --> Telephony --> Account 5 --> Auto Configuration Code
S_AUTOPROVISIONING_CODE_6		Yes	Settings --> Telephony --> Account 6 --> Auto Configuration Code
I_ONESHOT_PROVISIONING_MODE_1		No
I_ONESHOT_PROVISIONING_MODE_2		No
I_ONESHOT_PROVISIONING_MODE_3		No
I_ONESHOT_PROVISIONING_MODE_4		No
I_ONESHOT_PROVISIONING_MODE_5		No
I_ONESHOT_PROVISIONING_MODE_6		No