Autoprovisioning for RoutITBefore you begin you should have the following information available: - Login details for the Gigaset redirect-server.
- For an account of the Redirect-server you have to apply for it via your point of sale e.g. a Distributor.
- MAC-address and MAC-ID of the Gigaset device.
- Redirect URL
- This is the provisioning URL
- Acces to the RoutIT portal
- The device to provision should be able to connect to the internet
Gigaset Redirect-serverStep 1.Login at the redirect-server via http://prov.gigaset.net (alternative URL: https://prov.gigaset.net/Editor/#loginPage)
Step 2.Choose option: Redirection portal Step 3.MAC-ID: enter the MAC address and the ID URL: enter the URL where the device can find the provisioning file. Example : http://xsp.voipit.nl:80/dms/gigasetn/%MACD.xml Provider: This is an administrative field. You could use this to separate your own customers. Click on: Register
See screenshot below: Step 4.When the device is registered the system will give you a MAC password.
See screenshot below: Step 5.Note the MAC and MAC password somewhere for later use. The device will use MAC as username and MAC password as password for HTTP digest authentication to the RoutIT platform. RoutIT portal Step 1.Login on the portal. Step 2.Setup the account as you normally would do and don't forget to use the proper autoprovisioning profile.
Step 3.Go to a User click on Addresses (right side) Click on: Configure Identity/Device Profile Choose Tab "Profile" Under Authentication Select the radio button: Use Custom Credentials Step 4.Enter the MAC password (you got from the redirect-server) in the field: Device Acces Password Step 5.Reboot the device.
The device should be autoprovisioned. Also after a factory reset, the device will be provisioned after booting. |