Software 42.240, November 2016Bug-fixes and improvements:- LDAP:
- autolookup problem solved / LDAP buffering
- character set problem fixed
- various problems fixed
- SUOTA problem fixed
- Base no longer resets while specific address is set in configuration file (URL)
- Occasional reboot after 'No entries found' popup fixed
- Innovaphone PBX registration problem solved
- Web configurator also in Turkish language
- Russia: CLIP problems fixed
- Russian/Czech translations corrected
- Nordic language special characters in display name improved
- "Configuration file (URL)" input field can be locked
- Caller ID update after call forwarding behind "Deutsche Telekom Digitalisierungsbox" problem solved
- Metaswitch: Configuration file URL length enhanced to 255 characters
- SIP Authentication name field length enhanced to 74 characters
- Broadsoft: Codec renegotiation optimized
- Broadsoft: No RTP after long 'on hold' state problem fixed
- Long names in name replacement improved
- Provisioning parameter problem solved
- Provisioning handset name truncation to 9 characters problem solved
- Secure provisioning via https is now also possible when XML has more than 200 lines/parameters
- In rare cases, handset did not terminate call when external subscriber hang up behind "Deutsche Telekom Speedport 724V"
- Online directory improvements
- DNS SRV:
- Auerswald 5000R PBX: One way audio problem fixed
|
Software 42.238, May 2016Bug-fixes and improvements:Handset: Full support of new R650H PRO handset CLIP/COLP update after call transfer - Directories:
- Now Use LDAP address book also during active call (for transfer purposes).
- Refine search when using private phone-book fixed.
- Character set problems fixed with Gigaset T440/T640 PBX's
TR069: Various corrections, enhancements Secure provisioning error fixed - TLS:
- 23 new certificates added, also new root- and intermediate certificates from https://letsencrypt.org/certificates/
- Switch to select between TLS v1.0 and TLS v1.1
- Switch which to select which cipher suite is to be used:
- RSA_WITH_3DES_EDE_CBC_SHA
- RSA_WITH_RC4_128_MD5
- RSA_WITH_RC4_128_SHA
|
Software 42.231, December 2016Bug-fixes and improvements:- New handset SL750H PRO has full compatibility
TLS: Optimization of the "Private Key Generation" procedure Optimized security by disabling IP dialling - Include MAC address in UA-header
XML phonebook - White/Yellow pages search field: 'City' now optional VOIP INVITE with send only not accepted by TELEKOM server Only 'All DECT' handsets option is available in 'Call Forwarding' list after registration to base station Exception occurred when handset was deregistered or when send connections were changed - It is not possible to set own area code number in case option 'Other Country' has been selected
- SIP/RTP port range configured in Web Configurator is not used in case of "Use random port mode = on"
- Bug in VoIP Wizard
- R630H PRO and SL610H PRO Call list is closed after few seconds
- Starface PBX manager is not working
- Unwished deleting of message waiting indicator with call lists
- Copy phone number from call list to directory is not always possible – phone comes back to Idle
- Wrong caller ID after call transfer
- TR-069: Change format of software version
- TR-069: Change ProductClass/Modelname
Handset name provisioning with special characters leads to incorrect result in WebUI. Special characters are not provisioned correctly. BS sends Busy signal to server, when 1 call is running on INT2 and another comes in for another SIP profile on INT1, when Call waiting is deactivated. If INT2 is in an external call, then no external connection to INT1 is possible. INT1 is busy. - SIP Session Timers according the RFC 4028: Session-refresh is now preferred via UPDATE, if supported by both peers
|
Software 42.210, February 2016Bug-fixes and improvements:Known Issues:- Reboot occurs after de-registering handset
- Gigaset T300/T500 PBX: Handset name is not replaced after provisioning to Celsius server
- Copy phone number from call list to directory is not always possible – phone goes back to idle
- After firmware update system PIN is changed to default '0000'
|
Software 42.207, October 2014Bug-fixes and improvements: - Added support in TR 069 for Device.DeviceInfo.ModelName and Device.DeviceInfo.HardwareVersion
Introduced hard-coded languages in WebUI for Germany, Polish, French, English (no need to download language package) Implement Periodic Inform over SSL Implement SW downgrade using TR069 Multiple access to WebUI using HTTP digest (as a User and Administrator) WebUI HTTP digest password is in sync with TR069 connection request password Sending HTTP digest auth retransmission in the same TCP streams - implemented 2-way authentication over SSL connection
- Multiple access to LDAP (only for N510)
TR069 Aligned translation for Eco Mode and Eco Mode + in WebUI to use new texts - Maximum Range and No Radiation - Display message "Provider registration failed"
- 2 to 3 seconds delay of begin of audio path after call pickup
|
Software 42.199, June 2014Bug-fixes and improvements:- Corrected vCard Transfer via WebUI with special characters
- Minor bug fixes and improvements
- Timer change to 300s retry: phone fails in SIP Registration unable to be authenticated.
- No (dial)tone in certain call stages.
- When using TCP as transport protocol, the BS does not send BYE to the sip server.
|
|